Skip to contentSkip to conversation

Error with ASUS V6V and Ricoh CardReader

DISCUSSION Johannes Engel 1 participant 1 message May 28, 2006 ACPI

lore
Share & tools
lore
#0 lore raw

Good morning everyone here!

Beeing just new to this ml Pierre Ossman told me to forward my problem to you to ask if you know anything about what to do.
The problem is that my ASUS V6V seems not to initialize the SD card reader in a proper way coming out of suspend. Since there is already an original dsdt posted on acpi.sf.net I won't add mine (also BIOS revision 1201).
Please let me know if you need any further information.

-------- Original-Nachricht --------
Betreff: Re: [Sdhci-devel] Ricoh controller message after suspend and
resume
Datum: Sat, 27 May 2006 23:04:13 +0200
Von: Johannes Engel <[email protected]>
An: Pierre Ossman <[email protected]>
CC: [email protected]
Referenzen: <[email protected]> <[email protected]>

Quoted 24 lines · Pierre Ossman
Quoted 12 lines · Johannes Engel

sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 18 (level, low) -> IRQ 209 : Reset 0x1 never completed. Please report this to <[email protected]>.
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff
sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff
sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff
sdhci: Present: 0xffffffff | Host ctl: 0x000000ff
sdhci: Power: 0x000000ff | Blk gap: 0x000000ff

Quoted 9 lines

sdhci: Wake-up: 0x000000ff | Clock: 0x0000ffff
sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff
sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff
sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff
sdhci: Caps: 0xffffffff | Max curr: 0xffffffff
sdhci: =========================================== sdhci:slot0: Unknown controller version (255). Cowardly refusing to continue.

Quoted 5 lines

I don't suppose this is an Asus machine? :)

The hardware isn't properly set up on resume, so ther isn't much the driver can do. You'll have to talk to the guys at acpi.sf.net and see if they have any ideas.

This is in fact an ASUS machine: V6V. The problem persited a complete restart. Booting Windows and again Linux solved the problem.

Greetings, Johannes