Skip to contentSkip to conversation

cpufreq and kernel >2.6.15.6 is limited

DISCUSSION Eric Sandall 2 participants 2 messages May 31, 2006

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

It seems that any kernel on my Dell Inspiron 5100 after 2.6.15.6 (including 2.6.17-rc5) 'breaks' my cpufreq in that up to and including 2.6.15.6 I can scale between 300MHz-2.4GHz, but after (starting with 2.6.16) I can only scale between 2.1GHz and 2.4GHz.

I've attached the files, sorted by kernel, I assume may be helpful. Let me know if you need any more.

- -sandalle

- --

Eric Sandall                     |  Source Mage GNU/Linux Developer
[email protected]                  |  http://www.sourcemage.org/
http://eric.sandall.us/          |  SysAdmin @ Shock Physics @ WSU
http://counter.li.org/  #196285  |  http://www.shock.wsu.edu/

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEfOJ2HXt9dKjv3WERApOWAJ9NfCoUebqYvt4Ia01Sv+oEkn2mRwCgwVgy 5U9EJhEXwfRmQKbNeK0RJQQ=
=VCCC
-----END PGP SIGNATURE-----

cpufrequtils 0.4: cpufreq-info (C) Dominik Brodowski 2004
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 0
hardware limits: 300 MHz - 2.40 GHz
available frequency steps: 300 MHz, 600 MHz, 900 MHz, 1.20 GHz, 1.50 GHz, 1.80 GHz, 2.10 GHz, 2.40 GHz available cpufreq governors: conservative, ondemand, powersave, userspace, performance current policy: frequency should be within 900 MHz and 2.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 900 MHz.

processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping : 9
cpu MHz : 1794.434
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 4786.98

cpufrequtils 0.4: cpufreq-info (C) Dominik Brodowski 2004
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 0
hardware limits: 2.10 GHz - 2.40 GHz
available frequency steps: 2.10 GHz, 2.40 GHz
available cpufreq governors: conservative, ondemand, powersave, userspace, performance current policy: frequency should be within 2.10 GHz and 2.40 GHz.
The governor "ondemand" may decide which speed to use within this range.
current CPU frequency is 2.10 GHz.

processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping : 9
cpu MHz : 2099.947
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up cid xtpr
bogomips : 4786.96

#1 lore raw
Quoted 10 lines · Eric Sandall

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

It seems that any kernel on my Dell Inspiron 5100 after 2.6.15.6 (including 2.6.17-rc5) 'breaks' my cpufreq in that up to and including 2.6.15.6 I can scale between 300MHz-2.4GHz, but after (starting with 2.6.16) I can only scale between 2.1GHz and 2.4GHz.

I've attached the files, sorted by kernel, I assume may be helpful. Let me know if you need any more.

It may have worked in the past, but the CPU has an errata which makes it an unsafe operation to scale below 2GHz.

Dave

Signature · 1 line
http://www.codemonkey.org.uk