Skip to contentSkip to conversation

regarding bootloader fusing

DISCUSSION Martin Margraf 1 participant 1 message May 31, 2006

lore
Share & tools
lore
#0 lore raw

hi,

there is a tool called OST Tool 2.5. With this program you can flash the bootloader. But you need an type A to type A usb cable. Its pretty easy to use, i think there is a description available.

another way to bring the bootloader to the osk5912 is using a serial communication program like Hyperterminal (windows) or Minicom (linux).

http://linux.omap.com/pub/documentation/U-Boot for the OMAP16xx.pdf

or look at the OSK5912 Newbie Guide written by Matthew Percival

regards

martin