Add support for NET+40 development board
PATCH 1/1 Add support for NET+40 development board
Hello,
attached is a patch to add support for the good old NET+40 development board by NetSilicon (now Digi), featuring a NET+ARM 40 CPU with ARM7TDMI core.
It's based on the port for the ModNET50 Board by Thomas Elste. Some small changes in the Netarm ethernet driver and in the Netarm-specific startup code were also necessary. MAKEALL ARM7 still builds all ARM7 binaries.
CHANGELOG:
* Add support for NetSilicon NET+40 development board Patch by Rolf Peukert 31 May 2006
NEW files:
board/net40dev/lowlevel_init.Sboard/net40dev/flash.cboard/net40dev/net40dev.c
board/net40dev/Makefileboard/net40dev/config.mkboard/net40dev/u-boot.ldsinclude/configs/net40dev.h .. configuration file for a NET40 DevKit
doc/README.net40dev .. A readme file with some more info
MODIFIED files:
Makefile .. new entry "net40dev_config"
MAKEALL .. new entry "net40dev"
drivers/netarm_eth.c .. ethernet driver for NET+ARM CPUs
added support for Lucent PHY, had to relax some timeouts, new option CONFIG_NETARMETH_10MB_ONLY limits advertised capabilities to 10Mbps when defined
cpu/arm720t/start.S .. startup code for the cpu
(some NETARM register settings moved out to board configuration file)
include/configs/modnet50.h .. configuration file for ModNET50
(PLL and System control register settings
moved here from start.S)
cpu/arm720t/interrupts.c .. just fixed a comment
(timer is actually in prescale mode)
include/netarm_eth_module.h .. just a register definition include/netarm_registers.h include/netarm_gen_module.h .. minor adjustments for NET+40 CPU
regards,
Rolf
Signature · 11 lines
Institut fuer Mikroelektronik- und Mechatronik-Systeme gGmbH Ehrenbergstra?e 27 98693 Ilmenau, Germany -------------- next part -------------- A non-text attachment was scrubbed... Name: u-boot-net40.patch.gz Type: application/gzip Size: 14159 bytes Desc: not available Url : http://lists.denx.de/pipermail/u-boot/attachments/20060601/4c1b23db/attachment.bin