Skip to contentSkip to conversation

bi_brgfreq on MPC83xx

U-Boot-Users Alex Zeffertt 2 participants 2 messages Jun 19, 2006

lore
Share & tools
lore
#0 lore raw

Hi all,

On my MPC83xx board the bi_brgfreq element of the "residual board info" is not getting set by u-boot.

I've had a look at the chip user manual to try to find out how the BRG clock is defined but I've drawn blank!

Does anyone here know?

TIA,

Alex

#1 lore raw
Quoted 10 lines · Alex Zeffertt

Hi all,

On my MPC83xx board the bi_brgfreq element of the "residual board info" is
not getting set by u-boot.

I've had a look at the chip user manual to try to find out how the BRG clock is defined but I've drawn blank!

Does anyone here know?

Are you using an 834x? If so I wouldn't expect bi_brgfreq to be set since there aren't any BRGs on the chip.

- k