Skip to contentSkip to conversation

2.6.18-rc1: zd1211rw doesn't work yet?

DISCUSSION Harald Dunkel 2 participants 2 messages Jul 8, 2006

lore
Share & tools
lore
#0 lore raw

Hi folks,

I have used the "external" zd1211 driver for months without problems, but the integrated version in 2.6.18-rc1 does not work for me.

iwconfig says:

wlan0 802.11g zd1211 ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Invalid Bit Rate=1 Mb/s
Encryption key:XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX Security mode:open
Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

I had expected something like this (running iwconfig for 2.6.17.3
+ zd1211 rev80):

wlan0 802.11b/g NIC ESSID:"harrinet"
Mode:Managed Frequency=2.432 GHz Access Point: XX:XX:XX:XX:XX:XX Bit Rate:54 Mb/s
Retry:off RTS thr=2432 B Fragment thr:off
Encryption key:****-****-****-****-****-****-** Security mode:open
Power Management:off
Link Quality=84/100 Signal level=55/100 Noise level=0/100 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:44
Tx excessive retries:145 Invalid misc:0 Missed beacon:0

Please note that there is no MAC for 2.6.18-rc1.

???

Any hint would be highly appreciated. Of course I would be glad to help debugging.

Regards

Harri

#1 lore raw
Quoted 4 lines · Harald Dunkel

Hi folks,

I have used the "external" zd1211 driver for months without problems, but the integrated version in 2.6.18-rc1 does not work for me.

Please, post this to <[email protected]> along with details for your dongle, including the "zd1211 chip ..." line from your dmesg.

Thanks
Guennadi

Quoted 29 lines

iwconfig says:

wlan0 802.11g zd1211 ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Invalid Bit Rate=1 Mb/s
Encryption key:XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX Security mode:open
Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

I had expected something like this (running iwconfig for 2.6.17.3
+ zd1211 rev80):

wlan0 802.11b/g NIC ESSID:"harrinet"
Mode:Managed Frequency=2.432 GHz Access Point: XX:XX:XX:XX:XX:XX Bit Rate:54 Mb/s
Retry:off RTS thr=2432 B Fragment thr:off
Encryption key:****-****-****-****-****-****-** Security mode:open
Power Management:off
Link Quality=84/100 Signal level=55/100 Noise level=0/100 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:44
Tx excessive retries:145 Invalid misc:0 Missed beacon:0

Please note that there is no MAC for 2.6.18-rc1.

???

Quoted 11 lines

Any hint would be highly appreciated. Of course I would be glad to help debugging.

Regards

Harri

---
Guennadi Liakhovetski