Skip to contentSkip to conversation

u-boot hangs on boot time

U-Boot-Users tony 2 participants 2 messages Jul 19, 2006

lore
Share & tools
lore

tony

author
#0 lore raw

Hi all,
my u-boot-1.1.1 hangs while booting, as follow is the message got from the serial:
-----------------------------------------------------------------------------------
U-Boot code: 33F80000 -> 33FA19F8 BSS: -> 33FA5B8C
IRQ Stack: 33fc6b88
FIQ Stack: 33fc7b88
RAM Configuration:
Bank #0: 30000000 64 MB
Flash: 1 MB
NAND:64 MB

Video Format : PAL
In:    serial
Out:   serial
Err:   serial

------------------------------------------------
after some tests by tracing the sequences of the funtions, I found that the u-boot hangs while comming to this funtion:
device_register (&dev),which is a subfuntion of drv_system_init (); -------in u-boot-1.1.1/common/devices.c

and I look into device_register(&dev):
int device_register (device_t * dev)
{
ListInsertItem (devlist, dev, LIST_END);
return 0;
}
as follow are two invoid funtions copy from the devices.c.
int ListInsertItem (list_t list, void *ptrToItem, int itemPosition) {
return ListInsertItems (list, ptrToItem, itemPosition, 1);
}
int ListInsertItems (list_t list, void *ptrToItems, int firstItemPosition,
int numItemsToInsert)
{
int numItems = (*list)->numItems;

if (firstItemPosition == numItems + 1)
firstItemPosition = LIST_END;
else if (firstItemPosition > numItems)
return 0;

if ((*list)->numItems >= (*list)->listSize) {
if (!ExpandListSpace (list, -numItemsToInsert))
return 0;
}

if (firstItemPosition == LIST_START) {
if (numItems == 0) {
/* special case for empty list */
firstItemPosition = LIST_END;
} else {
firstItemPosition = 1;
}
}

if (firstItemPosition == LIST_END) { /* add at the end of the list */
if (ptrToItems)
memcpy (ITEMPTR (list, numItems), ptrToItems,

     (*list)->itemSize * numItemsToInsert);
  else
   memset (ITEMPTR (list, numItems), 0,
     (*list)->itemSize * numItemsToInsert);

(*list)->numItems += numItemsToInsert;
} else { /* move part of list up to make room for new item */
memmove (ITEMPTR (list, firstItemPosition - 1 + numItemsToInsert),
ITEMPTR (list, firstItemPosition - 1),
(numItems + 1 - firstItemPosition) * (*list)->itemSize);

if (ptrToItems)
memmove (ITEMPTR (list, firstItemPosition - 1), ptrToItems,

      (*list)->itemSize * numItemsToInsert);
  else
   memset (ITEMPTR (list, firstItemPosition - 1), 0,
     (*list)->itemSize * numItemsToInsert);

(*list)->numItems += numItemsToInsert;
}
return 1;
}

I am so dizzy about what's going on there. the u-boot has been using for months....so I don't think it's the problem of the u-boot.maybe it's about the problem of the hardware, to cause the u-boot hangs???

any help is appreciated.thank you.

tony.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060719/4b89b8f1/attachment.htm

#1 lore raw
Quoted 2 lines · In message <44BDCFD8.02678D.25262> you wrote:

my u-boot-1.1.1 hangs while booting, as follow is the message got from the serial:

General rule: in case of problems try using current code. U-Boot 1.1.1 is obsolete.

Second: it would have been really nice if you had mentioned whioch board / processor this is.

Quoted 2 lines

after some tests by tracing the sequences of the funtions, I found that the u-boot hangs while comming to this funtion:
device_register (&dev),which is a subfuntion of drv_system_init (); -------in u-boot-1.1.1/common/devices.c

THis code has been running fine for ages. My guess is memory problems on your hardware.

Quoted 1 line

I am so dizzy about what's going on there. the u-boot has been using for months....so I don't think it's the problem of the u-boot.maybe it's about the problem of the hardware, to cause the u-boot hangs???

Did you try it on another board?

Quoted 4 lines

--=====003_Dragon177227050737_=====

Content-Type: text/html;
	charset="gb2312"

Content-Transfer-Encoding: 7bit

STOP posting HTML here!!!

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Anyone can count the seeds in an apple.
No one can count the apples in a seed.