[Fwd: - ide-remove-dma_base2-field-form-ide_hwif_t.patch removed from -mm tree]

Hello.

Alan and Andrew wanted me to coordinate the change with SGI before
recasting this patch because the sgiioc4.c is the only real user of the 'dma_base2' field which the IDE maintaner wanted me to remove. The use of this field in this driver doesn't seem necessary or even well grounded -- hwif_data seem to fit the task better... Will you ACK this change?

WBR, Sergei

-------- Original Message --------
Subject: - ide-remove-dma_base2-field-form-ide_hwif_t.patch removed from -mm tree
Date: Mon, 26 Jun 2006 11:19:17 -0700
From: [email protected]
To: [email protected], [email protected], [email protected], [email protected]

The patch titled

IDE: remove 'dma_base2' field form 'ide_hwif_t'

has been removed from the -mm tree. Its filename is

ide-remove-dma_base2-field-form-ide_hwif_t.patch

This patch was dropped because it conflicts with ide-clean-up-siimage.patch

------------------------------------------------------
Subject: IDE: remove 'dma_base2' field form 'ide_hwif_t'
From: Sergei Shtylylov <[email protected]>

Remove 'dma_base2' field from 'ide_hwif_t' as it's used only by 2 drivers and without a great need.

Signed-off-by Sergei Shtylyov <[email protected]>

Cc Bartlomiej Zolnierkiewicz <[email protected]>

Cc Alan Cox <[email protected]>

Signed-off-by Andrew Morton <[email protected]>

---

 drivers/ide/ide-dma.c     |   14 +-------------
 drivers/ide/pci/sgiioc4.c |   22 ++++++++++------------
 include/linux/ide.h       |    1 -
 3 files changed, 11 insertions(+), 26 deletions(-)

diff -puN drivers/ide/ide-dma.c~ide-remove-dma_base2-field-form-ide_hwif_t drivers/ide/ide-dma.c

drivers/ide/ide-dma.c renamed from drivers/ide/ide-dma.c~ide-remove-dma_base2-field-form-ide_hwif_t +1 -13

@@ -802,8 +802,6 @@ static int ide_release_iomio_dma(ide_hwi
 	release_region(hwif->dma_base, 8);
 	if (hwif->extra_ports)
 		release_region(hwif->extra_base, hwif->extra_ports);
-	if (hwif->dma_base2)
-		release_region(hwif->dma_base, 8);
 	return 1;
 }
 

@@ -877,19 +875,9 @@ static int ide_iomio_dma(ide_hwif_t *hwi
 	}
 
 	if(hwif->mate)
-		hwif->dma_master = (hwif->channel) ? hwif->mate->dma_base : 
 base;
+		hwif->dma_master = (hwif->channel) ? 
 hwif->mate->dma_base:base;
 	else
 		hwif->dma_master = base;
-	if (hwif->dma_base2) {
-		if (!request_region(hwif->dma_base2, ports, hwif->name))
-		{
-			printk(" -- Error, secondary ports in use.\n");
-			release_region(base, ports);
-			if (hwif->extra_ports)
-				release_region(hwif->extra_base, 
 hwif->extra_ports);
-			return 1;
-		}
-	}

return 0;
}

diff -puN drivers/ide/pci/sgiioc4.c~ide-remove-dma_base2-field-form-ide_hwif_t drivers/ide/pci/sgiioc4.c

drivers/ide/pci/sgiioc4.c renamed from drivers/ide/pci/sgiioc4.c~ide-remove-dma_base2-field-form-ide_hwif_t +10 -12

@@ -220,7 +220,7 @@ sgiioc4_ide_dma_end(ide_drive_t * drive)
 	ide_hwif_t *hwif = HWIF(drive);
 	u64 dma_base = hwif->dma_base;
 	int dma_stat = 0;
-	unsigned long *ending_dma = (unsigned long *) hwif->dma_base2;
+	unsigned long *ending_dma = ide_get_hwifdata(hwif);
 
 	hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
 

@@ -367,7 +367,8 @@ sgiioc4_INB(unsigned long port)
 static void __devinit
 ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
 {
-	int num_ports = sizeof (ioc4_dma_regs_t);
+	int   num_ports = sizeof(ioc4_dma_regs_t);
+	void *pad;
 
 	printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
 	       dma_base, dma_base + num_ports - 1);

@@ -391,17 +392,14 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsig
 
 	hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 
-	hwif->dma_base2 = (unsigned long)
-		pci_alloc_consistent(hwif->pci_dev,
-				     IOC4_IDE_CACHELINE_SIZE,
-				     (dma_addr_t *) &(hwif->dma_status));
+	pad = pci_alloc_consistent(hwif->pci_dev, IOC4_IDE_CACHELINE_SIZE,
+				   (dma_addr_t *) &(hwif->dma_status));
 
-	if (!hwif->dma_base2)
-		goto dma_base2alloc_failure;
-
-	return;
+	if (pad) {
+		ide_set_hwifdata(hwif, pad);
+		return;
+	}
 
-dma_base2alloc_failure:
 	pci_free_consistent(hwif->pci_dev,
 			    IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
 			    hwif->dmatable_cpu, hwif->dmatable_dma);

@@ -461,7 +459,7 @@ sgiioc4_configure_for_dma(int dma_direct
 	hwif->OUTL(dma_addr, dma_base + IOC4_DMA_PTR_L * 4);
 
 	/* Address of the Ending DMA */
-	memset((unsigned int *) hwif->dma_base2, 0, IOC4_IDE_CACHELINE_SIZE);
+	memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
 	ending_dma_addr = cpu_to_le32(hwif->dma_status);
 	hwif->OUTL(ending_dma_addr, dma_base + IOC4_DMA_END_ADDR * 4);
 

diff -puN drivers/ide/pci/siimage.c~ide-remove-dma_base2-field-form-ide_hwif_t drivers/ide/pci/siimage.c
diff -puN include/linux/ide.h~ide-remove-dma_base2-field-form-ide_hwif_t include/linux/ide.h

include/linux/ide.h renamed from include/linux/ide.h~ide-remove-dma_base2-field-form-ide_hwif_t +0 -1

@@ -773,7 +773,6 @@ typedef struct hwif_s {
 	unsigned long	dma_status;	/* dma status register */
 	unsigned long	dma_vendor3;	/* dma vendor 3 register */
 	unsigned long	dma_prdtable;	/* actual prd table address */
-	unsigned long	dma_base2;	/* extended base addr for dma ports 
 */
 
 	unsigned long	config_data;	/* for use by chipset-specific code 

include/linux/ide.h renamed from include/linux/ide.h~ide-remove-dma_base2-field-form-ide_hwif_t +0 -0

 	*/
 	unsigned long	select_data;	/* for use by chipset-specific code 
 	*/

_

Patches currently in -mm which might be from [email protected] are

origin.patch ide-actually-honor-drives-minimum-pio-dma-cycle-times.patch ide-pdc202xx_old-remove-the-obsolete-busproc.patch pdc202xx_old-depends-on-config_blk_dev_idedma.patch remove-code-that-has-long-been-commented-out-from-pdc20265_old.patch ide-clean-up-siimage.patch ide-claim-extra-dma-ports-regardless-of-channel.patch ide-remove-dma_base2-field-form-ide_hwif_t.patch ide-always-release-dma-engine.patch ide-hpt3xxn-clocking-fixes.patch ide-fix-hpt37x-timing-tables.patch ide-optimize-hpt37x-timing-tables.patch ide-fix-hpt3xx-hotswap-support.patch ide-fix-the-case-of-multiple-hpt3xx-chips-present.patch ide-hpt3xx-fix-pci-clock-detection.patch ide-hpt3xx-fix-pci-clock-detection-fix-2.patch piix-fix-82371mx-enablebits.patch piix-remove-check-for-broken-mw-dma-mode-0.patch piix-slc90e66-pio-mode-fallback-fix.patch ide_dma_speed-fixes.patch hpt3xx-rework-rate-filtering.patch hpt3xx-rework-rate-filtering-tidy.patch hpt3xx-print-the-real-chip-name-at-startup.patch hpt3xx-switch-to-using-pci_get_slot.patch hpt3xx-cache-channels-mcr-address.patch hpt3x7-merge-speedproc-handlers.patch hpt370-clean-up-dma-timeout-handling.patch enable-cdrom-dma-access-with-pdc20265_old.patch

Hello.

Alan and Andrew wanted me to coordinate the change with SGI before
recasting this patch because the sgiioc4.c is the only real user of the 'dma_base2' field which the IDE maintaner wanted me to remove. The use of this field in this driver doesn't seem necessary or even well grounded -- hwif_data seem to fit the task better... Will you ACK this change?

Quoted 4 lines

Alan and Andrew wanted me to coordinate the change with SGI before
recasting this patch because the sgiioc4.c is the only real user of the
'dma_base2' field which the IDE maintaner wanted me to remove. The use of
this field in this driver doesn't seem necessary or even well grounded -- hwif_data seem to fit the task better... Will you ACK this change?

This patch won't apply with the line wrapping in the email. Can you please resend? You can turn off the "format=flowed" tag in your mailer or send as an attachment.

The field is necessary for proper operation of the driver.

jeremy

Quoted 9 lines

Quoted 5 lines

Alan and Andrew wanted me to coordinate the change with SGI before
recasting this patch because the sgiioc4.c is the only real user of the 'dma_base2' field which the IDE maintaner wanted me to remove. The use of this field in this driver doesn't seem necessary or even well grounded -- hwif_data seem to fit the task better... Will you ACK this change?

This patch won't apply with the line wrapping in the email. Can you please resend? You can turn off the "format=flowed" tag in your mailer or send as an attachment.

Done, after being recast. Please ACK or NAK.