Skip to contentSkip to conversation

Is the qla3xxx driver in the mainline?

DISCUSSION Albert Lee 2 participants 3 messages Jul 26, 2006 – Jul 27, 2006

Subsystems (2)
lore
Share & tools
lore
#1 lore raw

Albert Lee wrote:
[]

Quoted 2 lines

(I am curious to have some performance comparison of qla3xxx + open iscsi v.s. qla4xxx + on board TOE/iscsi.)

On wich card? I've been told that IPS4010 for example isn't supported by qla3xxx.

BTW, I found qla4xxx (on IPS4010) performs noticeable worse than open-iscsi stack on top of tigon (non-jumbo- frames-capable) GigE NIC (on an eserver xSeries 346 machine).

/mjt

author
#2 lore raw
Quoted 9 lines · Michael Tokarev

Albert Lee wrote:
[]

Quoted 2 lines

(I am curious to have some performance comparison of qla3xxx + open iscsi v.s. qla4xxx + on board TOE/iscsi.)

On wich card? I've been told that IPS4010 for example isn't supported by qla3xxx.

I've borrowed an ISP4022 based adapter, the qla3xxx should be supported.

Quoted 6 lines

BTW, I found qla4xxx (on IPS4010) performs noticeable worse than open-iscsi stack on top of tigon (non-jumbo- frames-capable) GigE NIC (on an eserver xSeries 346 machine).

Thanks for the info. With qla3xxx, we can actually use the Ethernet interface of the qla4022 instead of the bcm57xx tg3. So, we could compare the performance of the on-board TOE/iscsi with open-iscsi better.

--
albert