Try 2: Modify bcm43xx-d80211 to use wireless statistics

index a0faeca..75174f9 100644
@@ -27,6 +27,8 @@ #define BCM43xx_IRQWAIT_MAX_RETRIES	50
 
 #define BCM43xx_IO_SIZE			8192
 
+#define BCM43xx_RX_MAX_SSI		60
+
 /* Active Core PCI Configuration Register. */
 #define BCM43xx_PCICFG_ACTIVE_CORE	0x80
 /* SPROM control register. */

@@ -623,7 +625,7 @@ struct bcm43xx_noise_calculation {
 };
 
 struct bcm43xx_stats {
-	u8 link_quality;
+	u8 link_noise;
 	/* Store the last TX/RX times here for updating the leds. */
 	unsigned long last_tx;
 	unsigned long last_rx;

index 6366020..e1b77ae 100644
@@ -1506,15 +1506,7 @@ static void handle_irq_noise(struct bcm4
 		else
 			average -= 48;
 
-		if (average > -65)
-			bcm->stats.link_quality = 0;
-		else if (average > -75)
-			bcm->stats.link_quality = 1;
-		else if (average > -85)
-			bcm->stats.link_quality = 2;
-		else
-			bcm->stats.link_quality = 3;
-//		dprintk(KERN_INFO PFX "Link Quality: %u (avg was %d)\n", bcm->stats.link_quality, average);
+		bcm->stats.link_noise = average;
 drop_calculation:
 		bcm->noisecalc.calculation_running = 0;
 		return;

@@ -4421,6 +4413,7 @@ #endif
 	ieee->host_gen_beacon_template = 1;
 	ieee->rx_includes_fcs = 1;
 	ieee->monitor_during_oper = 1;
+	ieee->maxssi = BCM43xx_RX_MAX_SSI;
 	ieee->tx = bcm43xx_net_hard_start_xmit;
 	ieee->open = bcm43xx_net_open;
 	ieee->stop = bcm43xx_net_stop;

index 3f86079..d2a2777 100644
@@ -475,7 +475,9 @@ void bcm43xx_rx(struct bcm43xx_private *
 	 */
 
 	memset(&status, 0, sizeof(status));
-	status.ssi = bcm43xx_rssi_postprocess(bcm, rxhdr->rssi, is_ofdm,
+	status.noise = bcm->stats.link_noise;
+	status.ssi = rxhdr->rssi;
+	status.signal = bcm43xx_rssi_postprocess(bcm, rxhdr->rssi, is_ofdm,
 					      !!(rxflags1 & BCM43xx_RXHDR_FLAGS1_2053RSSIADJ),
 					      !!(rxflags3 & BCM43xx_RXHDR_FLAGS3_2050RSSIADJ));
 	if (is_ofdm)