Skip to contentSkip to conversation

Main differences between drivers

DISCUSSION Guilherme Moro 1 participant 1 message Aug 15, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hello again

Another question, this 2 drivers can, theorically, cover all kind of Intel based hardware?
If I build my own, all new, platform, will I need to write a new driver? Will emerge any situation to write a new driver, thinking that I will always use Intel processors, compatibles with Enhanced SpeedStep?

Guilherme Moro

Quoted 46 lines

-----Mensagem original-----
De: Len Brown [mailto:[email protected]]
Enviada em: Tuesday, August 15, 2006 11:57 AM
Para: [email protected]
Cc: Guilherme Moro
Assunto: Re: Main differences between drivers

Quoted 9 lines · Guilherme Moro

Hello all,

Can someone explain, or send a link or a document that explain the real difference between the different drivers for Intel processors ? Why the same processor can use speedstep-ich, speedstep-centrino and acpi-cpufreq ?
the basic differences I can understand, like acpi-cpufreq use of acpi tables, but what driver is the "better" or more "official" for Intel platforms?

good question -- the names are quite poor, and unfortunately it is a pain to re-name drivers.

As of 2.6.17, both acpi-cpufreq and speedstep-centrino use ACPI tables, but acpi-cpufreq uses IO accesses and speedstep centrino uses MSR accesses. Since MSR accesses are faster,
it is preferred to try speedstep-centrino first.

speedstep centrino also has reverse engineered tables to fall back on if ACPI tables fail. I haven't seen this happen in practice in recent history.
The hard-coded tables were there from before Intel published the PDC bits that allow ACPI tables to work with MSR accesses.

Going forward, there has been a set of patches on the list to:
1. add MSR access to acpi-cpufreq
2. remove ACPI tables from speedstep-centrino.

That would mean that acpi-cpufreq can handle any ACPI situation -- IO or MSR; and that speedstep-centrino would be only for the reverse- engineered case.
Thus the preference would change to be acpi-cpufreq first, speedstep- centrino second --
though the reverse preference would probably be okay too.

-Len

Quoted 9 lines

ps. don't bother with speedstep-ich if the above work, and never use p4- clockmod.

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.10.10/419 - Release Date: 8/15/2006

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.10.10/419 - Release Date: 8/15/2006

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.10.10/419 - Release Date: 8/15/2006

Signature · 1 line
Guilherme Moro