Skip to contentSkip to conversation

Problems with large block devices in 64 bit kernels

DISCUSSION Christian Schmid 1 participant 1 message Sep 7, 2006

lore
Share & tools
lore
#0 lore raw
Quoted 13 lines · Andries Brouwer
Quoted 8 lines · Christian Schmid

I run kernel 2.6.17.11 vanilla in 64 bit mode with 32 bit emulation.
model name : Intel(R) Xeon(R) CPU 5150 @ 2.66GHz

Unfortunately there is no support for file-systems bigger than 2 TB in 64-bit mode with 32-bit emulation.

erikm in #kernelnewbies told me to report it here:

<Dragony> statfs("/MD2", 0xff8deca4) = -1 EOVERFLOW (Value too large for defined data type)

Quoted 8 lines

Hmm. statfs uses struct statfs which has a 4-byte f_blocks field, and hence cannot hold larger values. You get what you ask for.

statfs64 uses struct statfs64 which uses an 8-byte f_blocks field.

(And then there is statvfs.)

Andries

Hmm I dont think its that easy. Actually the max. value is 16 TB because of 232*4096 (block-size) and this works on a 32 bit kernel.

df on 32 bit kernel:
(See attached image. Sorry, this kernel has not the required network-driver included. Had to take a screenshot)

SAME df on 64 bit kernel:
write(1, "Filesystem 1K-blocks "..., 67Filesystem 1K-blocks Used Available Use% Mounted on
) = 67
statfs("/", {f_type=0x58465342, f_bsize=4096, f_blocks=732384, f_bfree=508015, f_files=2939776, f_ffree=2901955, f_namelen=255}) = 0
write(1, "/dev/md0 2929536 "..., 58/dev/md0 2929536 897476 2032060
31% /
) = 58
statfs("/proc", {f_type="PROC_SUPER_MAGIC", f_bsize=4096, f_blocks=0, f_bfree=0, f_files=0, f_ffree=0, f_namelen=255}) = 0 statfs("/MD1", {f_type=0x58465342, f_bsize=4096, f_blocks=4407104, f_bfree=4403156, f_files=17638656, f_ffree=17638645, f_namelen=255}) = 0
write(1, "/dev/md1 17628416 "..., 61/dev/md1 17628416 15792 17612624
1% /MD1
) = 61
statfs("/MD2", 0xffa30614) = -1 EOVERFLOW (Value too large for defined data type)
write(2, "df: ", 4df: ) = 4
write(2, "/MD2\'", 6/MD2') = 6
write(2, ": Value too large for defined da"..., 39: Value too large for defined data type) = 39
write(2, "\n", 1
) = 1
statfs("/dev/pts", {f_type=0x1cd1, f_bsize=4096, f_blocks=0, f_bfree=0, f_files=0, f_ffree=0, f_namelen=255}) = 0
munmap(0xf7eea000, 4096) = 0

So its definetly something with the kernel.

Regards,
Christian Schmid