Skip to contentSkip to conversation

e-mail clients

RFC Victor Hugo 15 participants 18 messages Sep 8, 2006

lore
Share & tools
lore
#0 lore raw

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

-Victor Hugo

#1 lore raw
Quoted 5 lines

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt??

pine does the job.

Quoted 1 line

Thunderbird?? Telnet??

Thunderbird is said to not by default, and that you need to set some option first.

Telnet is something very different.

Jan Engelhardt

#2 lore raw
Quoted 1 line · Jan Engelhardt

Telnet is something very different.

You can send patches using telnet

"Telnet - SMTP Commands (sending mail using telnet)"
http://www.yuki-onna.co.uk/email/smtp.html

But there are simpler ways to send patches.

Quoted 1 line

Jan Engelhardt

Regards,
Michal

Signature · 3 lines
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)
#3 lore raw
Quoted 2 lines
Quoted 2 lines

Telnet is something very different.

Even though all four geometric figures in IQ tests have something in comment (they're triangular for example), they are different to a certain degree that one falls apart. Any IQ test has some sort of that.
So, which one does not belong in the group?
( ) pine
( ) mutt
( ) Thunderbird
( ) telnet

That was my point.

Quoted 1 line

You can send patches using telnet

You can also send patches using netcat, you might even be able to use bash itself! It is not very friendly though, esp. when it comes to attachments or MIME encoding.

Jan Engelhardt

#7 lore raw
In reply to Victor Hugo
Quoted 8 lines · Victor Hugo

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

I personally use both 'pine' and 'kmail' and they both work perfectly for sending patches.

Signature · 3 lines
Jesper Juhl <[email protected]>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html
#4 lore raw
In reply to Jan Engelhardt
Quoted 3 lines · Jan Engelhardt

you might even be able to use bash
itself! It is not very friendly though, esp. when it comes to attachments or MIME encoding.

LOL :)

Bash is a very universal tool - something like EmacsOS.

Quoted 6 lines

Jan Engelhardt
--

Regards,
Michal

Signature · 3 lines
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)
#15 lore raw
In reply to Victor Hugo
Quoted 5 lines · On Thu, 07 Sep 2006 17:02:03 -0700 Victor Hugo <[email protected]> wrote:

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

Sylpheed / Sylpheed-Claws

I don't remember every version but with Sylpheed-Claws 2.4.0 you can configure it to wrap (or not):

- typed text
- quoted text
- pasted text

(Configuration -> Prefereces -> Compose -> Wrapping)

Moreover you have the "Insert File" button that inserts a file "inline" (for wrapping it follows the "pasted text" rule).

Other useful things you can set are:

	outgoing encodig (I use ISO-8859-15)
	trensfer encoding (I use 8bit)

NOTE: if he can he falls back to US-ASCII / 7bit

Signature · 2 lines
	Paolo Ornati
	Linux 2.6.18-rc6 on x86_64
#5 lore raw
In reply to Michal Piotrowski
Quoted 9 lines
Quoted 5 lines

you might even be able to use bash
itself! It is not very friendly though, esp. when it comes to attachments or
MIME encoding.

LOL :)

Bash is a very universal tool - something like EmacsOS.

Except that it is not as bloated as emacs.

cat </dev/tcp/kernel.org/finger

echo -en "EHLO y\nMAIL FROM: [email protected]\nRCPT TO: [email protected]\n..."  \
	>/dev/tcp/mailer.localdomain/25

Jan Engelhardt

#8 lore raw
In reply to Jesper Juhl
Quoted 11 lines · Jesper Juhl
Quoted 8 lines · Victor Hugo

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

I personally use both 'pine' and 'kmail' and they both work perfectly for sending patches.

Confirmed.

#16 lore raw
In reply to Victor Hugo
Quoted 4 lines · Victor Hugo

As I've learned--most web-clients have a hard time sending text only e-mail without wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

TkRat can be quite conveniently toggled back and forth between non-wrapping and wrapping editor mode.

Signature · 3 lines
Stefan Richter
-=====-=-==- =--= -=---
http://arcgraph.de/sr/
#9 lore raw
In reply to Jesper Juhl

Am Freitag, 8. September 2006 10:24 schrieb Jesper Juhl:

Quoted 9 lines · Victor Hugo
Quoted 5 lines

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

I personally use both 'pine' and 'kmail' and they both work perfectly for sending patches.

With kmail, you have control over line breaks with Option -> Wrap lines, which is useful for e.g. pasted syslog data, but remember to enable it before writing the message, since you have to manually add line breaks for the entered text too.

Inlined patches should be added via Message -> Insert File to preserve line breaks and white space.

Pete

#10 lore raw
Quoted 11 lines · Hans-Peter Jansen

Am Freitag, 8. September 2006 10:24 schrieb Jesper Juhl:

Quoted 9 lines · Victor Hugo
Quoted 5 lines

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

I personally use both 'pine' and 'kmail' and they both work perfectly for sending patches.

Quoted 8 lines

With kmail, you have control over line breaks with Option -> Wrap lines, which is useful for e.g. pasted syslog data, but remember to enable it before writing the message, since you have to manually add line breaks for the entered text too.

Inlined patches should be added via Message -> Insert File to preserve line breaks and white space.

But be sure and turn word wrapping off before inserting the file, or pasting (usually bad I might add). And my version of kmail wraps the whole document if the wrapping is turned back on, as it is now. Which makes it rather frustrating.

Quoted 6 lines

Pete
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 7 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
#13 lore raw
In reply to Hans-Peter Jansen
Quoted 11 lines · Hans-Peter Jansen

Am Freitag, 8. September 2006 10:24 schrieb Jesper Juhl:

Quoted 9 lines · Victor Hugo
Quoted 5 lines

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

I personally use both 'pine' and 'kmail' and they both work perfectly for sending patches.

Quoted 7 lines

With kmail, you have control over line breaks with Option -> Wrap lines, which is useful for e.g. pasted syslog data, but remember to enable it before writing the message, since you have to manually add line breaks for the entered text too.

Inlined patches should be added via Message -> Insert File to preserve line breaks and white space.

Another great feature of KMail is the ability to use an external editor for composition, but not be forced to use it for reading emails. If you find the KMail composer too clumsy, you can always have it fire up vim or emacs.

Settings -> Configure KMail -> Composer -> External Editor

Signature · 5 lines
Cheers,
Alistair.

Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
#17 lore raw
In reply to Victor Hugo
Quoted 5 lines · Victor Hugo

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

Mutt does the job very well.

Thunderbird requires that you switch to preformat style before copy-pasting the patch (or use the external editor extension).

Brice

#11 lore raw
In reply to Gene Heskett
Quoted 10 lines · Gene Heskett
Quoted 9 lines · Hans-Peter Jansen

Am Freitag, 8. September 2006 10:24 schrieb Jesper Juhl:

Quoted 2 lines

I personally use both 'pine' and 'kmail' and they both work perfectly for sending patches.

With kmail, you have control over line breaks with Option -> Wrap lines, which is useful for e.g. pasted syslog data, but remember to enable it before writing the message, since you have to manually add line breaks for the entered text too.

Quoted 7 lines
Quoted 2 lines

Inlined patches should be added via Message -> Insert File to preserve line breaks and white space.

But be sure and turn word wrapping off before inserting the file, or pasting (usually bad I might add). And my version of kmail wraps the whole document if the wrapping is turned back on, as it is now. Which makes it rather frustrating.

Strange. I leave my KMail to word-wrap always, in which case Message -> Insert File automatically turns off any and all text munging when it is inserting the chosen file. No need to toggle any switches here, either before or after inserting.

FWIW, KMail 1.9.1 shipped with openSUSE 10.1

-- Vadim Lobanov

#12 lore raw
In reply to Gene Heskett
Quoted 17 lines · Gene Heskett
Quoted 16 lines · Hans-Peter Jansen

Am Freitag, 8. September 2006 10:24 schrieb Jesper Juhl:

Quoted 9 lines · Victor Hugo
Quoted 5 lines

As I've learned--most web-clients have a hard time sending text only e-mail without
wrapping every single line (not very good for patches). Any suggestions about which client to use on lkml?? Pine?? Mutt?? Thunderbird?? Telnet??

I personally use both 'pine' and 'kmail' and they both work perfectly for sending patches.

With kmail, you have control over line breaks with Option -> Wrap lines, which is useful for e.g. pasted syslog data, but remember to enable it before writing the message, since you have to manually add line breaks for the entered text too.

Quoted 7 lines
Quoted 2 lines

Inlined patches should be added via Message -> Insert File to preserve line breaks and white space.

But be sure and turn word wrapping off before inserting the file, or pasting (usually bad I might add). And my version of kmail wraps the whole document if the wrapping is turned back on, as it is now. Which makes it rather frustrating.

To workaround this, I first type the message with wordwrapping on, then close the message window and let it save the message to Drafts. Then repoen the message from Drafts, turn off wordwrap and insert the patch using Message->Insert File. It's not great but still better than Thunderbird.

Quoted 7 lines
Quoted 7 lines

Pete
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 1 line
Ondrej Zary
#14 lore raw

LKML FAQ, newsgroups and newbies (was Re: [RFC] e-mail clients)

In reply to Jesper Juhl
Quoted 7 lines · Jesper Juhl
Quoted 3 lines · Victor Hugo

about which client to use on lkml?? Pine?? Mutt??
Thunderbird?? Telnet??

I personally use both 'pine' and 'kmail' and they both work perfectly for sending patches.

Why NNTP was abandoned and development switched to pure SMTP+maillist ?

Pros and cons are. Classic NNTP consider "courtesy copies" (Cc) to be impolite,
pure SMTP eases scripting of handling patches. But, adding CCs to NNTP postings is possible, while reading big volumes is very convenient. Any backend SMTP MUA/MTA may be used for patch-handling job. Discussion about (any web-based) bugzilla vs e-mail, applies to NNTP: there are many readers (with e-mail support as well), easy managing, ASCII.

IMHO it's very good start for anyone. Thus i've found a way to step into development even i'm not cs, guru, hacker, just unix-like os (stupid) user, even have had read all that treating discussions about lkml volumes.

I use Mozilla-newsreader-gmane.org + SMTP MTA | mutt MUA, but couldn't yet develop patch handling, i didn't write a good one yet.

So things like:
* press articles' questions "It's so many messages in LKML, how one can read them all ???",
* SMTP@spam (key is _@_ ;),
* e-mail handling headache,
is prize for not using NNTP as a primary. I really want to see reasonable explanations on question above. FAQ has "COLA = comp.os.linux.announce (newsgroup)", nothing more about NNTP as it used to be used.

-*- OT -*-

On every LKML post there's a message about FAQ URL, that page has
"NOTE: this page is no longer maintained..." (Dot coms boomed) Many linux-related sites also outdated. Advogato is going down (well most of linux developers moved from it years ago), we are getting older, having families, children, something becomes more/less important. So that's next ? (hopefully not an accelerated kernel-XML-Parser 4 Desktop Linux (R) ;)

Maybe linux-kernel need new blood ? Victor Hugo, being not from linux-visionaries, you're welcome.

Signature · 3 lines
-o--=O`C  /. .\  (i want ..., but with ENOPATCH) (+)
 #oo'L O      o					  |
<___=E M    ^--                                   | (you're ... the wrong ...)
#6 lore raw
In reply to Jan Engelhardt
Quoted 10 lines · Jan Engelhardt
Quoted 2 lines
Quoted 2 lines

Telnet is something very different.

Even though all four geometric figures in IQ tests have something in comment (they're triangular for example), they are different to a certain degree that one falls apart. Any IQ test has some sort of that.
So, which one does not belong in the group?
( ) pine
( ) mutt
( ) Thunderbird

~~~~~~~~~~~~~~~
thunderbird -- the only one that requires X :-).

Quoted 3 lines

( ) telnet

That was my point.

Pavel

Signature · 1 line
IQ 5 -- can detect light