Device not ready problem
A message that is not in the archive (sent off-list or not yet received): [email protected]
Kelvin Wood wrote to linux1394-user:
Quoted 7 lines
Hi everyone,
We recently purchased a Maxtor 300GB drive, and we've been trying to mount the drive on a server running RedHat Enterprise 3. So far, we've got the server to detect the drive and map it to
/dev/sdadevice, but it seems to have the following errors out while trying to read the disk:
Quoted 11 lines
Sep 8 18:02:35 server kernel: blk: queue c8897a18, I/O limit 4095Mb (mask 0xffffffff) Sep 8 18:02:35 server kernel: Vendor: Maxtor Model: OneTouch III Rev: 0338 Sep 8 18:02:35 server kernel: Type: Direct-Access ANSI SCSI revision: 06 Sep 8 18:02:35 server kernel: blk: queue c8897018, I/O limit 4095Mb (mask 0xffffffff) Sep 8 18:02:35 server kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Sep 8 18:02:35 server kernel: SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) Sep 8 18:02:35 server kernel: sda:<6>Device 08:00 not ready. Sep 8 18:02:35 server kernel: I/O error: dev 08:00, sector 0 Sep 8 18:02:35 server kernel: Device 08:00 not ready. Sep 8 18:02:35 server kernel: I/O error: dev 08:00, sector 0 Sep 8 18:02:35 server kernel: unable to read partition table
Was the disk already spinning before sbp2 logged in?
If it was _not_ spinning, then it was fixed in Linux 2.6.18-rc4, 2.6.17.2, and 2.6.16.28 by
http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e31f59ce593b073ee14241781edfb0637697eeb6
See also https://bugzilla.novell.com/show_bug.cgi?id=183011 and try the sg_start command, as suggested in comment #2 at this bug. (After that, you'd need to somehow force Linux to re-read the partition table.)
If the disk was already spinning, it is hard to say whether this patch would be the fix. Additional SCSI debug logging or the sg_start trick would tell us. Alas...
Quoted 4 lines
Other bits of miscellaneous information that may help:
Kernel: kernel-smp-2.4.21-40.EL
Libraw: libraw1394-0.9.0-10.RHEL3
...I don't know if the SCSI core's code which above 2.6 patch relies on is also available in Linux 2.4 or as a patch for Linux 2.4. The guys at linux-scsi know more about it, therefore I crossposted.
Quoted 42 lines
[root@server root]# cat
/proc/scsi/sbp2_0/1
Host scsi1 : SBP-2 IEEE-1394 (ohci1394)
Driver version : $Rev: 906 $ James Goodwin <[email protected]>Module options : max_speed : S800 max_sectors : 255 serialize_io : no exclusive_login : yesAttached devices :
[Channel: 00, Id: 00, Lun: 00] Direct-Access Maxtor OneTouch III[root@server root]# lspci
00:00.0 Host bridge: Broadcom CNB20HE Host Bridge (rev 23)
00:00.1 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
00:00.2 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
00:00.3 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
00:01.0 RAID bus controller: Compaq Computer Corporation Smart Array 5i/532 (rev 01) 00:02.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08) 00:04.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08) 00:05.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:06.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller 00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 51)
00:0f.1 IDE interface: Broadcom OSB4 IDE Controller
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 04) 01:03.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) 01:03.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) 01:03.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
01:03.3 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) 07:03.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
07:07.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Controller (rev 12)[root@server root]# cat
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: HP Model: Ultrium 2-SCSI Rev: S24D
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Maxtor Model: OneTouch III Rev: 0338
Type: Direct-Access ANSI SCSI revision: 06
Quoted 5 lines
Have we got a dud disk on our hands, or is this a problem with the driver?
Thanks,
Kelvin
Do you have a Windows box with FireWire or a Mac to test the disk?
Signature · 3 lines
Stefan Richter -=====-=-==- =--= -=--- http://arcgraph.de/sr/
Quoted 1 line · I wrote:
Kelvin Wood wrote to linux1394-user:
...
Quoted 12 lines
Quoted 10 lines
Sep 8 18:02:35 server kernel: Vendor: Maxtor Model: OneTouch III Rev: 0338 Sep 8 18:02:35 server kernel: Type: Direct-Access ANSI SCSI revision: 06 Sep 8 18:02:35 server kernel: blk: queue c8897018, I/O limit 4095Mb (mask 0xffffffff) Sep 8 18:02:35 server kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Sep 8 18:02:35 server kernel: SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) Sep 8 18:02:35 server kernel: sda:<6>Device 08:00 not ready. Sep 8 18:02:35 server kernel: I/O error: dev 08:00, sector 0 Sep 8 18:02:35 server kernel: Device 08:00 not ready. Sep 8 18:02:35 server kernel: I/O error: dev 08:00, sector 0 Sep 8 18:02:35 server kernel: unable to read partition tableWas the disk already spinning before sbp2 logged in?
...
Quoted 1 line
Quoted 1 line
Kernel: kernel-smp-2.4.21-40.EL
...
I just browsed the 2.4.20 sources at lxr.linux.no and it appears that 2.4's sd driver does send Start Stop Unit (start = 1) to the device if a Test Unit Ready failed with 'not ready' --- _before_ the capacity is read. In your log, Read Capacity works fine, apparently without previous Start Stop Unit. But the regular Read command after Read Capacity failed. Hmm...
Signature · 3 lines
Stefan Richter -=====-=-==- =--= -=--- http://arcgraph.de/sr/