nfssvc: Address already in use
Subsystems (2)
Hello.
Whenever I try to start a NFS daemon on my Gentoo box here, I get the following error in the logfile:
Sep 12 02:45:01 ares nfsd[17564]: nfssvc: Address already in use
Nothing more.
This error occured due to the switch of the kernel version from 2.6.15 to latest 2.6.17.* . During this change nothing of the programs, ... has changed.
If I boot the old kernel 2.6.15 everything works fine again with the same config, programs, ...
I made an manual call to rpc.nfsd:
/usr/sbin/rpc.nfsd 8
and ran it with strace, the result was this strace log:
http://files.mgeek.de/nfsd.strace
Some info:
NFS Server version 3
Kernel options:
<*> NFS file system support
[*] Provide NFSv3 client support
<*> NFS server support
[*] Provide NFSv3 server support
[*] Provide NFS server over TCP support
nfs-utils-1.0.10
I really can't see where the problem is located so I'm appreciating any help ...
If you need any more information, please let me know, I'll provide it as soon as possible.
TIA, martin
Signature · 15 lines
Get my public GPG key from pgp.mit.edu or wwwkeys.pgp.net Key ID: 0x44085D12 -- Homepage: http://mroot.net/ Powered by Gentoo Linux (http://gentoo.org/) ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 6 lines · Martin Wegner
Hello.
Whenever I try to start a NFS daemon on my Gentoo box here, I get the following error in the logfile:
Sep 12 02:45:01 ares nfsd[17564]: nfssvc: Address already in use
Have you tried looking with 'netstat -p' if some daemon has already grabbed port 2049? If you have set fixed ports for lockd, you might also want to check that those ports are free.
Cheers,
Trond
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Hello.
Quoted 4 lines · Trond Myklebust
[...]
Have you tried looking with 'netstat -p' if some daemon has already grabbed port 2049? If you have set fixed ports for lockd, you might also want to check that those ports are free.
Thanks for this clue, it pushed me into the right direction. I found out that the DHCP server component of my dnsmasq used port 2048. Sure, this is not 2049, but somehow, when I had shut down dnsmasq and then started nfsd, everything worked. Also after reboot now, everything's fine, so the problem is solved for me.
Thanks again,
martin
Signature · 14 lines
Get my public GPG key from pgp.mit.edu or wwwkeys.pgp.net Key ID: 0x44085D12 -- Homepage: http://mroot.net/ Powered by Gentoo Linux (http://gentoo.org/) ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs