Skip to contentSkip to conversation

ieee80211 and devices which decrypt in hardware

DISCUSSION Daniel Drake 3 participants 6 messages Sep 13, 2006 – Sep 14, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

I'm working on support for hardware-based frame decryption in zd1211rw. While doing so I encountered some strange behaviour in ieee80211 which I'm wondering if someone can clarify. Alternatively if someone could just confirm how the Intel hardware behaves here that would be useful...

The normal structure of a WEP-encrypted frame is:

1. 802.11 header (including WEP bit)
2. IV (4 bytes)
3. Encrypted data

The structure of a frame coming from the zd1211 device where the frame has been decrypted in hardware is:

1. 802.11 header (including WEP bit)
2. IV (4 bytes)
3. Decrypted data

We pass this up to ieee80211_rx as usual, but things don't work right. ieee80211 converts the frame to an ethernet frame as usual, but includes the WEP IV as the first 4 bytes of the data. (Instead, I want it to skip over the IV, successful decryption has already been verified)

This is easy enough to fix with another ieee80211 flag or something like that, but I am wondering why it already works for existing drivers which decrypt in hardware. When doing hardware decryption, does the Intel hardware really cut out the 4 byte IV and shift the rest of the data so that it continues immediately on from the header? Seems like a complicated operation to do in hardware (although I don't really know much about hw design...)

Daniel

#1 lore raw
Quoted 7 lines · Daniel Drake

Hi,

I'm working on support for hardware-based frame decryption in zd1211rw. While doing so I encountered some strange behaviour in ieee80211 which I'm wondering if someone can clarify. Alternatively if someone could just confirm how the Intel hardware behaves here that would be useful...

Quoted 5 lines

The normal structure of a WEP-encrypted frame is:

1. 802.11 header (including WEP bit)
2. IV (4 bytes)
3. Encrypted data

4. ICV
5. FCS

Quoted 6 lines

The structure of a frame coming from the zd1211 device where the frame has been decrypted in hardware is:

1. 802.11 header (including WEP bit)
2. IV (4 bytes)
3. Decrypted data

Does it strip ICV and FCS?

Quoted 5 lines

We pass this up to ieee80211_rx as usual, but things don't work right. ieee80211 converts the frame to an ethernet frame as usual, but includes the WEP IV as the first 4 bytes of the data. (Instead, I want it to skip over the IV, successful decryption has already been verified)

Quoted 7 lines

This is easy enough to fix with another ieee80211 flag or something like that, but I am wondering why it already works for existing drivers which decrypt in hardware. When doing hardware decryption, does the Intel hardware really cut out the 4 byte IV and shift the rest of the data so that it continues immediately on from the header? Seems like a complicated operation to do in hardware (although I don't really know much about hw design...)

in bcm43xx-softmac we use memmove to move the wireless header 4 bytes up and after that strip the first 4 bytes of the skb.
I don't think there is another easy way to handle this. You'd have to modify the stack and softmac. And this would probably result in more overhead than the simple memove of 24 bytes.

Signature · 1 line
Greetings Michael.
#2 lore raw
Quoted 1 line · Michael Buesch

Does it strip ICV and FCS?

The driver always strips FCS (unconditionally).

The device does not strip ICV even when hardware decryption is in use, it gets included at the end of the frame, and I guess we should also handle that.

Quoted 5 lines

in bcm43xx-softmac we use memmove to move the wireless header 4 bytes up and after that strip the first 4 bytes of the skb.
I don't think there is another easy way to handle this. You'd have to modify the stack and softmac. And this would probably result in more overhead than the simple memove of 24 bytes.

softmac doesn't need modifying, and the ieee80211 modification is very simple. See the attached patch. ieee80211 could also be modified very easily to drop the ICV.

Surely this is nicer than adding IEEE802.11 header parsing code to zd1211rw rx path (currently there is none, which is nice) and a memmove?

Daniel

net/ieee80211/ieee80211_rx.c +5 -0
Index: linux/net/ieee80211/ieee80211_rx.c
===================================================================
@@ -655,6 +655,11 @@ int ieee80211_rx(struct ieee80211_device
 		goto rx_dropped;
 	}
 
+	/* If the device does decryption but leaves the IV in place then we
+	 * need to kill it. */
+	if (!can_be_decrypted && (fc & IEEE80211_FCTL_PROTECTED))
+		hdrlen += 4;
+
 	/* skb: hdr + (possible reassembled) full plaintext payload */
 
 	payload = skb->data + hdrlen;
#3 lore raw
Quoted 1 line · Daniel Drake

adding IEEE802.11 header parsing code to zd1211rw rx path (currently there is none, which is nice)

Oops, that's obviously a lie. Anyway, I still think it's easier/better to do in the stack, would you agree? That just leaves questions about whether it should be a new flag, special value for ieee->host_decrypt, etc.

Daniel

#4 lore raw
In reply to Daniel Drake

Review

Quoted 4 lines · Daniel Drake
(quoted diff) +4 -0
+       /* If the device does decryption but leaves the IV in place then we: 
+        * need to kill it. */: 
+       if (!can_be_decrypted && (fc & IEEE80211_FCTL_PROTECTED)): 
+               hdrlen += 4;: 

That might work, unless there are devices that leave the protected bit set but do strip the IV/ICV...

johannes

#5 lore raw
In reply to Daniel Drake
Quoted 8 lines · Daniel Drake
Quoted 1 line · Michael Buesch

Does it strip ICV and FCS?

The driver always strips FCS (unconditionally).

The device does not strip ICV even when hardware decryption is in use, it gets included at the end of the frame, and I guess we should also handle that.

You should skb_trim it, or otherwise it will be included in the payload, which will result in various weird bugs.

Signature · 1 line
Greetings Michael.