Add ucc_geth driver data structure

---
include/linux/fsl_devices.h | 39 ++++++++++++++++++++++++++++++++++++++-

1 files changed, 38 insertions(+), 1 deletions(-)

index 16fbe59..a16d82f 100644
@@ -83,7 +83,6 @@ struct fsl_i2c_platform_data {

#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002

-

enum fsl_usb2_operating_modes {
	FSL_USB2_MPH_HOST,
	FSL_USB2_DR_HOST,
@@ -121,5 +120,43 @@ struct fsl_spi_platform_data {
	u32	sysclk;
};

+/* Ethernet interface (phy management and speed) +*/
+typedef enum enet_interface {
+ ENET_10_MII, /* 10 Base T, MII interface */
+ ENET_10_RMII, /* 10 Base T, RMII interface */
+ ENET_10_RGMII, /* 10 Base T, RGMII interface */
+ ENET_100_MII, /* 100 Base T, MII interface */
+ ENET_100_RMII, /* 100 Base T, RMII interface */
+ ENET_100_RGMII, /* 100 Base T, RGMII interface */
+ ENET_1000_GMII, /* 1000 Base T, GMII interface */
+ ENET_1000_RGMII, /* 1000 Base T, RGMII interface */
+ ENET_1000_TBI, /* 1000 Base T, TBI interface */
+ ENET_1000_RTBI /* 1000 Base T, RTBI interface */
+} enet_interface_e;
+
+struct ucc_geth_platform_data {
+ /* device specific information */
+ u32 device_flags;
+ u32 phy_reg_addr;
+
+ /* board specific information */
+ u32 board_flags;
+ u8 rx_clock;
+ u8 tx_clock;
+ u32 phy_id;
+ enet_interface_e phy_interface;
+ u32 phy_interrupt;
+ u8 mac_addr[6];
+};
+
+/* Flags related to UCC Gigabit Ethernet device features */
+#define FSL_UGETH_DEV_HAS_GIGABIT 0x00000001
+#define FSL_UGETH_DEV_HAS_COALESCE 0x00000002
+#define FSL_UGETH_DEV_HAS_RMON 0x00000004
+
+/* Flags in ucc_geth_platform_data */
+#define FSL_UGETH_BRD_HAS_PHY_INTR 0x00000001 /* if not set use a timer */
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */