Skip to contentSkip to conversation

Longhaul - Disable arbiter CLE266

PATCH New Rafał Bilski 1 participant 1 message Sep 23, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Longhaul - Disable arbiter CLE266

I have datasheet for CLE266 now. It is possible to enable port 0x22 on this chipset too.

This patch is adding support for older CPU connected to CLE266 chipset.

---

arch/i386/kernel/cpu/cpufreq/longhaul.c +9 -2
@@ -567,16 +567,23 @@ static acpi_status longhaul_walk_callbac
 static int enable_arbiter_disable(void)
 {
 	struct pci_dev *dev;
+	int port;
 	u8 pci_cmd;
 
 	/* Find PLE133 host bridge */
+	port = 0x78;
 	dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL);
+	/* Find CLE266 host bridge */
+	if (dev == NULL) {
+		dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL);
+		port = 0x76;
+	}
 	if (dev != NULL) {
 		/* Enable access to port 0x22 */
-		pci_read_config_byte(dev, 0x78, &pci_cmd);
+		pci_read_config_byte(dev, port, &pci_cmd);
 		if ( !(pci_cmd & 1<<7) ) {
 			pci_cmd |= 1<<7;
-			pci_write_config_byte(dev, 0x78, pci_cmd);
+			pci_write_config_byte(dev, port, pci_cmd);
 		}
 		return 1;
 	}

----------------------------------------------------------------------
Jestes kierowca? To poczytaj! >>> http://link.interia.pl/f199e