bluez 3.5 and link_key_request but no pin request and btsco failure

Hi all ;)

It seems i have a prob when pairing with my headset (that used to work). =

In syslog, i have only link_key_request but nothing about pin request. If we say i'm connected without pin request, i still have a prob with =

btsco (see above).

I'm running debian etch on a 2.6.15

here is my hcid.conf:

FR-PORT:/etc/bluetooth# cat hcid.conf
options {
         autoinit yes;
         security auto;
         pairing multi;
         passkey "0000";
}
device {
         name "%h-%d";
         class 0x3e0100;
         iscan enable; pscan enable;
         lm accept;
         lp rswitch,hold,sniff,park;
}

here is my rfcomm.conf:

FR-PORT:/etc/bluetooth# cat rfcomm.conf
rfcomm0 {
         bind yes;
         device 00:03:89:AB:3D:76;
         channel 1;
         comment "Oreillette";
}

what i've done:

FR-PORT:/etc/bluetooth# /etc/init.d/bluetooth restart

FR-PORT:/etc/bluetooth# tail -n 12 /var/log/syslog
Sep 28 21:48:14 localhost hcid[4897]: Bluetooth HCI daemon
Sep 28 21:48:14 localhost hcid[4897]: Register path:/org/bluez fallback:1
Sep 28 21:48:14 localhost hcid[4897]: HCI dev 0 registered
Sep 28 21:48:14 localhost hcid[4897]: Register path:/org/bluez/hci0 =

fallback:0

Sep 28 21:48:14 localhost hcid[4897]: HCI dev 0 already up
Sep 28 21:48:14 localhost hcid[4897]: Device hci0 has been added
Sep 28 21:48:14 localhost hcid[4897]: Starting security manager 0
Sep 28 21:48:14 localhost sdpd[4901]: Bluetooth SDP daemon
Sep 28 21:48:14 localhost hcid[4897]: Device hci0 has been activated
Sep 28 21:48:14 localhost hcid[4897]: name_listener_add(:1.39)
Sep 28 21:48:14 localhost hcid[4897]: Default passkey agent (:1.39, =

/org/bluez/passkey_agent_4912) registered

Sep 28 21:48:14 localhost hcid[4897]: name_listener_add(:1.40)

I put my headset in pairing mode then...

FR-PORT:/etc/bluetooth# hcitool scan
Scanning ...
         00:03:89:AB:3D:76       PLT 510 v.G

FR-PORT:~# hcidump -X -V  on an other console

FR-PORT:/etc/bluetooth# hcitool cc 00:03:89:AB:3D:76

FR-PORT:~# tail -f -n 5 /var/log/syslog
Sep 28 21:58:14 localhost hcid[4897]: Passkey Agent at :1.40, =

/org/bluez/passkey_agent_4910 timed out

Sep 28 21:58:14 localhost hcid[4897]: Releasing agent :1.40, =

/org/bluez/passkey_agent_4910

Sep 28 21:58:14 localhost hcid[4897]: name_listener_remove(:1.40)
Sep 28 22:00:02 localhost kernel: acerhk: mail led set to =3D 0x1
Sep 28 22:00:28 localhost hcid[4897]: link_key_request =

(sba=3D00:0B:6B:91:A2:E1, dba=3D00:03:89:AB:3D:76)

--> not asking for a pin key

FR-PORT:~# hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.31
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
     bdaddr 00:03:89:AB:3D:76 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
     Packet type: DM1 DM3 DM5 DH1 DH3 DH5

     Create Connection (0x01|0x0005) status 0x00 ncmd 1

     bdaddr 00:03:89:AB:3D:76
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
     bdaddr 00:03:89:AB:3D:76 key 458E0ED3B6E315C6394005E9F9E9AFA1

     Link Key Request Reply (0x01|0x000b) ncmd 1
     status 0x00 bdaddr 00:03:89:AB:3D:76

     status 0x00 handle 6 bdaddr 00:03:89:AB:3D:76 type ACL encrypt 0x00

< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 6 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK

     Write Link Policy Settings (0x02|0x000d) ncmd 1
     status 0x00 handle 6
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
     bdaddr 00:03:89:AB:3D:76 mode 2 clkoffset 0x0000

     Remote Name Request (0x01|0x0019) status 0x00 ncmd 1

     status 0x00 bdaddr 00:03:89:AB:3D:76 name 'PLT 510 v.G'

at the end:

FR-PORT:/etc/bluetooth# hcitool con
Connections:
         < ACL 00:03:89:AB:3D:76 handle 6 state 1 lm MASTER

Does it mean that my headset is correctly connected ? The worse is later:

FR-PORT:/etc/bluetooth# lsmod | grep snd_bt_sco
snd_bt_sco             11308  0
snd_hwdep               6560  1 snd_bt_sco
snd_pcm                67976  4 =

snd_bt_sco,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 39268 10 =

snd_bt_sco,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,= snd_pcm,snd_timer
snd_page_alloc 7560 3 snd_bt_sco,snd_intel8x0,snd_pcm

FR-PORT:/usr/local/bin# hciconfig hci0 voice 0x0060

FR-PORT:/usr/local/bin# btsco -v 00:03:89:AB:3D:76
btsco v0.42
Error: control open (hw:1): No such device
Error: Can't find device. Bail

Sorry for this long post but i start losing hope ;)

any advice ?

regards,

fabrice r=E9gnier.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE=
VDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Hi Fabrice,

this is not a paring problem. The pairing works fine and the device is connected. Your problem is different and it looks like a btsco problem.

Regards

Marcel

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users