Skip to contentSkip to conversation

TM1/TM2

DISCUSSION Erik Slagter 2 participants 2 messages Oct 2, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

Is there a reliable way to know whether tm1/tm2 and/or other throttling have been applied by the hardware?

I am very suspicious that my cpu does tm1 or tm2 once in a while, but I can't prove it. It doesn't seem to be reported via MCE, which I'd expect.

FWIW I have a Pentium D915 and it has eist and tm1/tm2 (although linux says only tm1), all enabled in the BIOS.

_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq

#1 lore raw
Quoted 10 lines · Erik Slagter

Hi,

Is there a reliable way to know whether tm1/tm2 and/or other throttling have been applied by the hardware?

I am very suspicious that my cpu does tm1 or tm2 once in a while, but I can't prove it. It doesn't seem to be reported via MCE, which I'd expect.

FWIW I have a Pentium D915 and it has eist and tm1/tm2 (although linux says only tm1), all enabled in the BIOS.

Thermal monitoring isn't actually handled by cpufreq, but by the mcheck code (arch/i386/kernel/cpu/mcheck/p4.c)

It appears that if it is in use it does the following printk's..

printk(KERN_EMERG "CPU%d: Temperature above threshold\n", cpu); printk(KERN_EMERG "CPU%d: Running in modulated clock mode\n",

So if you haven't seen those, it isn't in effect.

The only other thermal throttling is that provided by the p4-clockmod module, which will scale regardless of temperature. If you don't want it to scale, don't load the module ;)

Dave

Signature · 1 line
http://www.codemonkey.org.uk