Skip to contentSkip to conversation

Avoiding disk changes

linux-lvm John Ward 2 participants 2 messages Oct 5, 2006

lore
Share & tools
lore

John Ward

author
#0 lore raw
Quoted 1 line

Try to use hdparm to set your hard-drive in read-only mode.

Interesting suggestion, certainly shouldn't hurt. But AFAIK the device mapper runs in the kernel and it's going to do it's "own thing" before I get a chance to hdparm it.

That's why I'm most interested in determining what (if anything) a LVM configuration does ... especially in situations where it detects a bad/repairable configuration (if that even makes sense).

Regardless, I'll do some experimenting - not sure if there are going to be any limitations with hdparm and configuring my disks via a USB adapter.

#1 lore raw
Quoted 5 lines · John Ward
Quoted 1 line

Try to use hdparm to set your hard-drive in read-only mode.

Interesting suggestion, certainly shouldn't hurt. But AFAIK the device mapper runs in the kernel and it's going to do it's "own thing" before I get a chance to hdparm it.

The device mapper runs in the kernel, but it has no knowledge of the lvm structures. This is all done at user level.

I've forgotten in the thread whether or not this is a removable device. If it is, you can plug it in after startup, hdparm if that makes you more comfortable, and then rescan for physical volumes. If it is a more permanently attached volume, you might have to modify the OS's startup scripts to achieve this.

Perhaps you should use a CD-bootable rescue system (I recommend RIP Linux). At least RIP boots up, and you have to start LVM manually, which would give you a chance run hdparm and make it read only.

Dave Brown