cx24123: fix PLL divisor setup
PATCH 2/6 cx24123: fix PLL divisor setup
Quoted 1 line
From
1c8f534e446cd69f511c83378bb4501348a97ab1Mon Sep 17 00:00:00 2001
From: Yeasah Pell <[email protected]>
Date: Tue, 3 Oct 2006 21:56:18 -0400
Subject: [PATCH] cx24123: fix PLL divisor setup
The cx24109 datasheet says: "NOTE: if A=0, then N=N+1"
The current code is the result of a misinterpretation of the datasheet to mean exactly the opposite of the requirement -- The actual value of N is 1 greater than the value written when A is 0, so 1 needs to be *subtracted* from it to compensate.
Signed-off-by Yeasah Pell <[email protected]>
Signed-off-by Steven Toth <[email protected]>
Signed-off-by Michael Krufky <[email protected]>
--- drivers/media/dvb/frontends/cx24123.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/media/dvb/frontends/cx24123.c +2 -2
@@ -549,8 +549,8 @@ static int cx24123_pll_calculate(struct ndiv = ( ((p->frequency * vco_div *10 ) / (2 *XTAL /1000 )) /32 ) &0x1ff ; adiv = ( ((p->frequency * vco_div *10 ) / (2 *XTAL /1000 )) %32 ) &0x1f ; -if (adiv ==0 ) - ndiv++; +if (adiv ==0 && ndiv >0 ) + ndiv--;/* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */ state->pllarg = (3 <<19 ) | (3 <<17 ) | (1 <<16 ) | (pump <<14 ) | (ndiv <<5 ) | adiv;