Skip to contentSkip to conversation

Problem about sdram initialization

U-Boot-Users 田园 2 participants 2 messages Oct 11, 2006

lore
Share & tools
lore

田园

author
#0 lore raw

Hi,I have a little problem with the u-boot startup.when it run to the function relocate_code(in the /cpu/ppc4xx/start.s),it don't run continually. Through LED on the board ,I find that it stops at the code below:

addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
mtlr r0
blr
in_ram:
My questions are why the u-boot stop here and where the code jump to?

thank you !
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061011/9d53c338/attachment.htm

#1 lore raw
Quoted 10 lines · ??

Hi,I have a little problem with the u-boot startup.when it run to the
function relocate_code(in the /cpu/ppc4xx/start.s),it don't run continually. Through LED on the board ,I find that it stops at the code below:
addi r0, r10, in_ram - _start + *EXC_OFF_SYS_RESET*
mtlr r0
blr
in_ram:

Quoted 3 lines

My questions are why the u-boot stop here and where the code jump to?

thank you !

http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation

gvb