Skip to contentSkip to conversation

Intel T2250

DISCUSSION Mateusz Mielnicki 3 participants 5 messages Oct 18, 2006 – Oct 26, 2006

lore
Share & tools
lore
#0 lore raw

Modules speedstep-centrino is not loading. I tried vanilla sources, later phc and still the same errors. I do everything like in manual, and simply speedsteping don't work. I think that simply that processor is not listed in the source code. I'm working on HP nx7400 EY508ES, with Intel T2250 processor.

I'm using linux-phc-0.2.7 patch
Kernel 2.6.18-r1 from gentoo-sources
As attachment file from phc_debug_report script

Please, help me

MatiM

----------------------------------------------------
Już niedługo miś Boguś i jeleń Elliot zrobią w lesie porządki. "SEZON NA MISIA" - rewelacyjna komedia dla całej rodziny. W kinach od 13 października !!!
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fsezon.html&sid=901

_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq

#1 lore raw
Quoted 2 lines · Mateusz Mielnicki

Modules speedstep-centrino is not loading. I tried vanilla sources, later phc and still the same errors. I do everything like in manual, and simply speedsteping don't work. I think that simply that processor is not listed in the source code. I'm working on HP nx7400 EY508ES, with Intel T2250 processor.

does module acpi-cpufreq load instead?

-Len

#2 lore raw
In reply to Mateusz Mielnicki

Yes, every module of cpufreq loads, acpi-cpufreq, cpufreq_powersave, cpufreq_conservative, freq_table and so on, excepting speedstep-centrino which gives "No such device".

Dnia 19-10-2006 o godz. 7:36 Len Brown napisa³(a):

Quoted 11 lines · Mateusz Mielnicki
Quoted 1 line

Modules speedstep-centrino is not loading. I tried vanilla sources,

later phc and still the same errors. I do everything like in manual, and simply speedsteping don't work. I think that simply that processor is not listed in the source code.

Quoted 1 line

I'm working on HP nx7400 EY508ES, with Intel T2250 processor.

does module acpi-cpufreq load instead?

-Len

----------------------------------------------------
The Colors European Tour - jesieñ 2006 - sprawd¼ czy bêd± w Twoim mie¶cie -> Kliknij:
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd21.html&sid=904

#3 lore raw
Quoted 3 lines · Mateusz Mielnicki

Yes, every module of cpufreq loads, acpi-cpufreq, cpufreq_powersave, cpufreq_conservative, freq_table and so on, excepting speedstep-centrino which gives "No such device".

Well, this means that speedstep is working just fine; it uses the (preferred) acpi-cpufreq module.

Dominik

#4 lore raw
In reply to Mateusz Mielnicki

Well, I don't think so... sadly.

This is what I get in console:

MatiM matim # modprobe speedstep-centrino
FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.17-gentoo-r8-w/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): No such device MatiM matim # modprobe cpufreq_userspace
MatiM matim # modprobe cpufreq_powersave
MatiM matim # modprobe cpufreq_ondemand
MatiM matim # modprobe cpufreq_conservative
MatiM matim # cpufreq-info
cpufrequtils 001: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [email protected], please.
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
analyzing CPU 1:
no or unknown cpufreq driver is active on this CPU
MatiM matim #
MatiM matim # ls /sys/devices/system/cpu/cpu*
/sys/devices/system/cpu/cpu0:
cache topology

/sys/devices/system/cpu/cpu1:
cache topology
MatiM matim #
MatiM matim # /etc/init.d/cpufrequtils start
* Enabling ondemand cpufreq governor ... [ !! ]unknown or unhandled CPU?
MatiM matim #

As you can see there is nothing that would say it is working...
Is my processor T2250 really supported? I saw that speedstep-centrino contains clock and voltage information of certain processor's, and this one is not even mentioned on intel's page. What can I do with it ? Mateusz

Dnia 26-10-2006 o godz. 4:34 Dominik Brodowski napisa³(a):

Quoted 10 lines · Mateusz Mielnicki
Quoted 3 lines

Yes, every module of cpufreq loads, acpi-cpufreq, cpufreq_powersave, cpufreq_conservative, freq_table and so on, excepting speedstep-centrino which gives "No such device".

Well, this means that speedstep is working just fine; it uses the (preferred) acpi-cpufreq module.

Dominik

----------------------------------------------------
Nowa Gra Zakrêcone Dynie - sprwd¼ i kliknij:
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd24.html&sid=911
Czy zakrêcisz nimi jeszcze bardziej i zbijesz wszystkie z planszy?