ipw2200: "ieee80211: Info elem: parse failed"
Hi,
since 2.6.19-rc1 I'm getting these messages from ipw2200 driver:
ieee80211: Info elem: parse failed: info_element->len + 2 > left : info_element->len+2=8 left=2, id=128.
The driver says:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4km
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
and works, but the message is annoying, since the driver prints it again and again. What could be wrong?
regards,
Signature · 4 lines
http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Quoted 15 lines · On Thu, 19 Oct 2006 11:17:34 +0200 Jiri Slaby <[email protected]> wrote:
Hi,
since 2.6.19-rc1 I'm getting these messages from ipw2200 driver:
ieee80211: Info elem: parse failed:info_element->len+ 2 > left :
info_element->len+2=8 left=2, id=128.The driver says:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4km
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Quoted 3 lines
and works, but the message is annoying, since the driver prints it again and again. What could be wrong?
I suspect it was always failing. But the failure message has been changed so that it actually comes out.
commit f09fc44d8c25f22c4d985bb93857338ed02feac6
Author: Zhu Yi <[email protected]> Date: Mon Aug 21 11:34:19 2006 +0800
[PATCH] ieee80211: Workaround malformed 802.11 frames from AP
Stop processing further but return success when we receive a malformed packet from the AP. We need this patch to workaround some AP bugs. For example, the beacon frames from the Orinoco AP1000 contains an IE (value = 128) with length equals to 8 but the actual frame length is only 7.
net/ieee80211/ieee80211_rx.c +10 -7
@@ -1078,13 +1078,16 @@ #endifwhile (length >=sizeof (*info_element)) {if (sizeof (*info_element) + info_element->len > length) { -IEEE80211_DEBUG_MGMT ("Info elem: parse failed: " -"info_element->len + 2 > left : " -"info_element->len+2=%zd left=%d, id=%d.\n" , - info_element->len + -sizeof (*info_element), - length, info_element->id); -return 1 ; +IEEE80211_ERROR ("Info elem: parse failed: " +"info_element->len + 2 > left : " +"info_element->len+2=%zd left=%d, id=%d.\n" , + info_element->len + +sizeof (*info_element), + length, info_element->id); +/* We stop processing but don't return an error here +* because some misbehaviour APs break this rule. ie. +* Orinoco AP1000. */ +break ; }switch (info_element->id) {
Quoted 18 lines · Andrew Morton
Quoted 15 lines · On Thu, 19 Oct 2006 11:17:34 +0200 Jiri Slaby <[email protected]> wrote:
Hi,
since 2.6.19-rc1 I'm getting these messages from ipw2200 driver:
ieee80211: Info elem: parse failed:info_element->len+ 2 > left :
info_element->len+2=8 left=2, id=128.The driver says:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4km
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Quoted 6 lines
Quoted 3 lines
and works, but the message is annoying, since the driver prints it again and again. What could be wrong?
I suspect it was always failing. But the failure message has been changed so that it actually comes out.
This was already addressed by
http://marc.theaimsgroup.com/?l=linux-netdev&m=116119388014674&w=2
Thanks,
-yi