Skip to contentSkip to conversation

arm920t s3c24xx

DISCUSSION Michael Trimarchi 2 participants 3 messages Oct 27, 2006 – Nov 12, 2006

lore
Share & tools
lore
#0 lore raw

Hi,
I'm working on an s3c2410 and I notice that in the kernel there is not a function to read the bus mode of the arm920t. The kernel may fail to report the correct frequencies of the core to the user level. It can read the cp15 register to show the core frequency that can be taken from the amba bus or the flck.

Regards Michael

#1 lore raw
Quoted 6 lines · Michael Trimarchi

Hi,
I'm working on an s3c2410 and I notice that in the kernel there is not a function to read the bus mode of the arm920t. The kernel may fail to report the correct frequencies of the core to the user level. It can read the cp15 register to show the core frequency that can be taken from the amba bus or the flck.

All the frequencies are reported correctly, as there is no current reporting of the actual ARM frequency, only the system clocks, F, H and P.

Signature · 3 lines
Ben ([email protected], http://www.fluff.org/)

  'a smiley only costs 4 bytes'
#2 lore raw
In reply to Michael Trimarchi
Quoted 6 lines · Michael Trimarchi

Hi,
I'm working on an s3c2410 and I notice that in the kernel there is not a function to read the bus mode of the arm920t. The kernel may fail to report the correct frequencies of the core to the user level. It can read the cp15 register to show the core frequency that can be taken from the amba bus or the flck.

This question is best of being asked on the linux-arm-kernel list.

Signature · 3 lines
Ben ([email protected], http://www.fluff.org/)

  'a smiley only costs 4 bytes'