sky2 driver causes kernel crash as of 2.6.18.1
I have been compiling kernels from 2.6.16.16 on to see if there is any improvement in the Sky2 driver. The most recent official kernel version, 2.6.18.1, as of 10/31/06 seems to still have problems.
The crash debug splat indicates that the transmit routine was being executed when the final crash occured. But before the crash there were a series of diagnostics from the driver:
NETDEV WATCHDOG: eth4: transmit time out
sky2 eth4: tx timeout
sky2 hardware hung? flushing
messages.
Is there any better driver in a 'unstable' kernel that someone has tested sufficiently?
Thanks
John Clark
Quoted 12 lines · John Clark
I have been compiling kernels from 2.6.16.16 on to see if there is any improvement
in the Sky2 driver. The most recent official kernel version, 2.6.18.1, as of 10/31/06
seems to still have problems.The crash debug splat indicates that the transmit routine was being executed when
the final crash occured. But before the crash there were a series of diagnostics from
the driver:
Quoted 8 lines
NETDEV WATCHDOG: eth4: transmit time out
sky2 eth4: tx timeout
sky2 hardware hung? flushingmessages.
Is there any better driver in a 'unstable' kernel that someone has tested sufficiently?
Well, try "unstable" 2.6.19-rc4. I'm not sure, but bug may be related to 7bd656d12119708b37414bf909ab2995473da818
Although, there are some sky2 updates in future 2.6.18.2, maybe they are related too.
____