PCI card not detected on Intel 845G chipset
Hi there,
please remind me if this is the wrong list.
I recently installed 2.6.16 on a compaq evo PC running Intel 845G chipset. Kernel finds all major system devices (USB, VGA, etc) but fails to find the installed Netgear WG311T card in the PCI slot. lspci doesn't even show this card.
I tried all combinations of acpi=off, noapic, pci=routeirq without success. No error messages concerning the PCI bus appear in dmesg.
The only weird thing is, that lspci shows this device:
Unknown non-vga adapter
with the ID 0200:7008
I have not found any information about this device nor do I have any idea what this could be. The Netgear card should start with 168c:0013
Please CC me on any replies.
Thank you,
Ronny
Ronny> I recently installed 2.6.16 on a compaq evo PC running Intel Ronny> 845G chipset. Kernel finds all major system devices (USB, VGA, Ronny> etc) but fails to find the installed Netgear WG311T card in the Ronny> PCI slot. lspci doesn't even show this card.
Does Windows find this card? And have you made sure you've got the card propery seated in the slot? Maybe you've got a bad connection, or a 3.3v card in 5v slot. In other words, check the hardware.
Ronny> No error messages concerning the PCI bus appear in dmesg. Ronny> The only weird thing is, that lspci shows this device:
Ronny> Unknown non-vga adapter
Ronny> with the ID 0200:7008
Wierd, but try using 'lspci -vvvvv' for even more details on this unknown device.
John