: Not able to compile u-boot 1.1.5 for the at91rm9200dk
Hi All,
I have downloaded u-boot latest version 1.1.5 from the sourceforge.net I have installed cross compiler for arm.
*I am using following procedure to compile:*
make clobber
make clean
make at91rm9200dk_config
make dep
make all
*But,*
I am getting an error indicates that *"arm-linux-gcc: unrecognized option `-MQ'"*
please Let me know me, if I have left with any more configuration. *
Here is a log please some body can look into it. *make[1]: Leaving directory `/home/hcac/u-boot-1.1.5/post/cpu' make -C cpu/arm920t start.o
make[1]: Entering directory `/home/hcac/u-boot-1.1.5/cpu/arm920t'
arm-linux-gcc: start.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: cpu.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
arm-linux-gcc: interrupts.o: No such file or directory
arm-linux-gcc: unrecognized option `-MQ'
make[1]: *** [.depend] Error 1
make[1]: Leaving directory `/home/hcac/u-boot-1.1.5/cpu/arm920t'
make: *** [cpu/arm920t/start.o] Error 2*
*
Thanks
RajuCm
Quoted 2 lines · In message <[email protected]> you wrote:
I have downloaded u-boot latest version 1.1.5 from the sourceforge.net
This is not the latest version. The latest versionis top of tree in git repository. The latest release is 1.1.6.
Quoted 2 lines
make clobber
make clean
Pretty redundant, but doesn;t hurt.
Quoted 3 lines
make
at91rm9200dk_config
make dep
make all
OK.
Quoted 3 lines
*But,*
I am getting an error indicates that *"arm-linux-gcc: unrecognized option `-MQ'"*
Use better tools. See for example
http://www.denx.de/wiki/view/DULG/ELDKAvailability
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de God is real, unless declared integer.