Skip to contentSkip to conversation

sil3132 st6600 problem

PMP Daniel Schröder 2 participants 3 messages Nov 11, 2006 – Nov 21, 2006 libata

lore
Share & tools
lore
#0 lore raw

Hello *,

a couple of weeks ago, i posted a "success" message. This time i have a strange issue to report. A couple of weeks, with only one Samsung HD401LJ and everything was fine. Yesterday, i put another drive a Samsung HD501LJ into the second bay and shortly after this. (After FDISK and MKFS and a couple of powercycles) The device is completely unresponsive. With this device on, Windows XP freezes instantly...Linux shows the following at turning on:

And everytime, when i played with this device, he said something about USB...WTF?! Same IRQ? I dont think so:

<interrupts>
cat /proc/interrupts
CPU0

  0:     876859          XT-PIC  timer
  1:       7955          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:     466863          XT-PIC  libata, libata, libata, eth1
  7:     347524          XT-PIC  libata, eth0
  9:          0          XT-PIC  acpi
 10:        931          XT-PIC  ehci_hcd:usb1, HDA Intel
 11:     211376          XT-PIC  ohci1394, nvidia
 12:      25578          XT-PIC  i8042
 14:         46          XT-PIC  ide0
NMI:          0
LOC:     876799
ERR:          1
MIS:          0

</interrupts>

beneath you find some logs:

1. first time i put the device on with the new harddisk added
2. "test" of hotplug
3. device is dead

any clues/hints what i could do?

TIA

Daniel

<log-first-time-all-seems-to-be-ok.but why he wrote this with USB at the time i turn on the device?>

Nov  9 12:35:04 isla-magica hub 1-2:1.0: port 2 disabled by hub (EMI?),
re-enabling...
Nov  9 12:35:04 isla-magica usb 1-2.2: USB disconnect, address 4
Nov  9 12:35:04 isla-magica ata1: exception Emask 0x10 SAct 0x0 SErr
0x10000 action 0x42 frozen
Nov  9 12:35:04 isla-magica ata1: (irq_stat 0x00a00080, device exchanged)
Nov  9 12:35:04 isla-magica usb 1-2.2: new low speed USB device using
ehci_hcd and address 7
Nov  9 12:35:04 isla-magica usb 1-2.2: configuration #1 chosen from 1 choice
Nov  9 12:35:04 isla-magica input: HID 0c12:0005 as /class/input/input3
Nov  9 12:35:04 isla-magica input: USB HID v1.00 Joystick [HID
0c12:0005] on usb-0000:00:0a.1-2.2
Nov  9 12:35:04 isla-magica ata1: waiting for device to spin up (8 secs)
Nov  9 12:35:12 isla-magica ata1: soft resetting port
Nov  9 12:35:12 isla-magica ata1: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov  9 12:35:12 isla-magica ata1.15: Port Multiplier 1.1, 0x1095:0x3726
r23, 5 ports, feat 0x9/0x9
Nov  9 12:35:13 isla-magica ata1.00: hard resetting port
Nov  9 12:35:13 isla-magica ata1.00: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov  9 12:35:13 isla-magica ata1.01: hard resetting port
Nov  9 12:35:14 isla-magica ata1.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov  9 12:35:14 isla-magica ata1.02: hard resetting port
Nov  9 12:35:14 isla-magica ata1.02: SATA link down (SStatus 0 SControl 300)
Nov  9 12:35:14 isla-magica ata1.03: hard resetting port
Nov  9 12:35:15 isla-magica ata1.03: SATA link down (SStatus 0 SControl 300)
Nov  9 12:35:15 isla-magica ata1.04: hard resetting port
Nov  9 12:35:15 isla-magica ata1.04: SATA link down (SStatus 0 SControl 300)
Nov  9 12:35:15 isla-magica ata1.00: ATA-7, max UDMA7, 976773168
sectors: LBA48 NCQ (depth 31/32)
Nov  9 12:35:15 isla-magica ata1.00: configured for UDMA/100
Nov  9 12:35:15 isla-magica ata1.01: ATA-7, max UDMA7, 781422768
sectors: LBA48 NCQ (depth 31/32)
Nov  9 12:35:15 isla-magica ata1.01: configured for UDMA/100
Nov  9 12:35:15 isla-magica ata1: EH complete
Nov  9 12:35:15 isla-magica Vendor: ATA       Model: SAMSUNG HD501LJ
Rev: CR10
Nov  9 12:35:15 isla-magica Type:   Direct-Access
ANSI SCSI revision: 05
Nov  9 12:35:15 isla-magica SCSI device sdd: 976773168 512-byte hdwr
sectors (500108 MB)
Nov  9 12:35:15 isla-magica sdd: Write Protect is off
Nov  9 12:35:15 isla-magica sdd: Mode Sense: 00 3a 00 00
Nov  9 12:35:15 isla-magica SCSI device sdd: drive cache: write back
Nov  9 12:35:15 isla-magica SCSI device sdd: 976773168 512-byte hdwr
sectors (500108 MB)
Nov  9 12:35:15 isla-magica sdd: Write Protect is off
Nov  9 12:35:15 isla-magica sdd: Mode Sense: 00 3a 00 00
Nov  9 12:35:15 isla-magica SCSI device sdd: drive cache: write back
Nov  9 12:35:15 isla-magica sdd: unknown partition table
Nov  9 12:35:15 isla-magica sd 0:0:0:0: Attached scsi disk sdd
Nov  9 12:35:15 isla-magica sd 0:0:0:0: Attached scsi generic sg3 type 0
Nov  9 12:35:15 isla-magica Vendor: ATA       Model: SAMSUNG HD401LJ
Rev: ZZ10
Nov  9 12:35:15 isla-magica Type:   Direct-Access
ANSI SCSI revision: 05
Nov  9 12:35:15 isla-magica SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Nov  9 12:35:15 isla-magica sde: Write Protect is off
Nov  9 12:35:15 isla-magica sde: Mode Sense: 00 3a 00 00
Nov  9 12:35:15 isla-magica SCSI device sde: drive cache: write back
Nov  9 12:35:15 isla-magica SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Nov  9 12:35:15 isla-magica sde: Write Protect is off
Nov  9 12:35:15 isla-magica sde: Mode Sense: 00 3a 00 00
Nov  9 12:35:15 isla-magica SCSI device sde: drive cache: write back
Nov  9 12:35:15 isla-magica sde: sde1
Nov  9 12:35:15 isla-magica sd 0:0:1:0: Attached scsi disk sde
Nov  9 12:35:15 isla-magica sd 0:0:1:0: Attached scsi generic sg4 type 0
Nov  9 12:35:15 isla-magica scsi.agent[9175]: disk at
/devices/pci0000:00/0000:00:16.0/0000:06:00.0/host0/target0:0:0/0:0:0:0
Nov  9 12:35:15 isla-magica scsi.agent[9192]: disk at

/devices/pci0000:00/0000:00:16.0/0000:06:00.0/host0/target0:0:1/0:0:1:0 </log-first-time-all-seems-to-be-ok.but why he wrote this with USB at the time i turn on the device?>

test of hotplug

<log-hotplug>

Nov  9 12:38:44 isla-magica ata1.15: exception Emask 0x100 SAct 0x0 SErr
0x0 action 0x1 frozen
Nov  9 12:38:44 isla-magica ata1.15: (irq_stat 0x08000800, SDB notify)
Nov  9 12:38:44 isla-magica ata1.15: failed to read PMP GSCR[0] (errno=-16)
Nov  9 12:38:44 isla-magica ata1.15: PMP revalidation failed (errno=-16)
Nov  9 12:38:44 isla-magica ata1.15: retrying hardreset
Nov  9 12:38:44 isla-magica ata1.15: hard resetting port
Nov  9 12:38:49 isla-magica ata1.15: SATA link down (SStatus 1 SControl 300)
Nov  9 12:38:50 isla-magica ata1.15: failed to read PMP GSCR[0] (errno=-16)
Nov  9 12:38:50 isla-magica ata1.15: PMP revalidation failed (errno=-16)
Nov  9 12:38:50 isla-magica ata1.15: retrying hardreset in 5 secs
Nov  9 12:38:55 isla-magica ata1.15: hard resetting port
Nov  9 12:38:56 isla-magica hub 1-2:1.0: port 2 disabled by hub (EMI?),
re-enabling...
Nov  9 12:38:56 isla-magica usb 1-2.2: USB disconnect, address 7
Nov  9 12:38:56 isla-magica usb 1-2.2: new low speed USB device using
ehci_hcd and address 8
Nov  9 12:38:56 isla-magica usb 1-2.2: configuration #1 chosen from 1 choice
Nov  9 12:38:56 isla-magica input: HID 0c12:0005 as /class/input/input4
Nov  9 12:38:56 isla-magica input: USB HID v1.00 Joystick [HID
0c12:0005] on usb-0000:00:0a.1-2.2
Nov  9 12:38:58 isla-magica ata1.15: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov  9 12:38:59 isla-magica ata1.00: hard resetting port
Nov  9 12:39:00 isla-magica ata1.00: softreset failed (SRST command error)
Nov  9 12:39:00 isla-magica ata1.00: follow-up softreset failed,
retrying in 5 secs
Nov  9 12:39:05 isla-magica ata1.00: hard resetting port
Nov  9 12:39:07 isla-magica ata1.01: hard resetting port
Nov  9 12:39:08 isla-magica ata1.01: COMRESET failed (errno=-16)
Nov  9 12:39:08 isla-magica ata1.01: hardreset failed, retrying in 5 secs
Nov  9 12:39:14 isla-magica ata1.01: hard resetting port
Nov  9 12:39:15 isla-magica ata1.01: COMRESET failed (errno=-16)
Nov  9 12:39:15 isla-magica ata1.01: reset failed, giving up
Nov  9 12:39:15 isla-magica ata1.15: hard resetting port
Nov  9 12:39:15 isla-magica ata1: controller in dubious state,
performing PORT_RST
Nov  9 12:39:17 isla-magica ata1.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Nov  9 12:39:18 isla-magica ata1.00: hard resetting port
Nov  9 12:39:19 isla-magica ata1.00: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Nov  9 12:39:19 isla-magica ata1.01: hard resetting port
Nov  9 12:39:20 isla-magica ata1.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov  9 12:39:21 isla-magica ata1.02: hard resetting port
Nov  9 12:39:22 isla-magica ata1.02: SATA link down (SStatus 0 SControl 300)
Nov  9 12:39:22 isla-magica ata1.03: hard resetting port
Nov  9 12:39:23 isla-magica ata1.03: SATA link down (SStatus 0 SControl 300)
Nov  9 12:39:24 isla-magica ata1.04: hard resetting port
Nov  9 12:39:25 isla-magica ata1.04: SATA link down (SStatus 0 SControl 300)
Nov  9 12:39:25 isla-magica ata1.00: configured for UDMA/100
Nov  9 12:39:25 isla-magica ata1.01: configured for UDMA/100
Nov  9 12:39:25 isla-magica ata1: EH pending after completion, repeating
EH (cnt=4)
Nov  9 12:39:25 isla-magica ata1.15: exception Emask 0x10 SAct 0x0 SErr
0x0 action 0x41
Nov  9 12:39:25 isla-magica ata1.15: (irq_stat 0x01900090, PHY RDY changed)
Nov  9 12:39:25 isla-magica ata1: EH complete
Nov  9 12:39:25 isla-magica SCSI device sdd: 976773168 512-byte hdwr
sectors (500108 MB)
Nov  9 12:39:25 isla-magica sdd: Write Protect is off
Nov  9 12:39:25 isla-magica sdd: Mode Sense: 00 3a 00 00
Nov  9 12:39:25 isla-magica SCSI device sdd: drive cache: write back
Nov  9 12:39:25 isla-magica SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Nov  9 12:39:25 isla-magica sde: Write Protect is off
Nov  9 12:39:25 isla-magica sde: Mode Sense: 00 3a 00 00
Nov  9 12:39:25 isla-magica SCSI device sde: drive cache: write back
Nov  9 12:39:25 isla-magica SCSI device sdd: 976773168 512-byte hdwr
sectors (500108 MB)
Nov  9 12:39:25 isla-magica sdd: Write Protect is off
Nov  9 12:39:25 isla-magica sdd: Mode Sense: 00 3a 00 00
Nov  9 12:39:25 isla-magica SCSI device sdd: drive cache: write back
Nov  9 12:39:25 isla-magica SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Nov  9 12:39:25 isla-magica sde: Write Protect is off
Nov  9 12:39:25 isla-magica sde: Mode Sense: 00 3a 00 00
Nov  9 12:39:25 isla-magica SCSI device sde: drive cache: write back

</log-hotplug>

and this is bad...

<log-bad>

Nov  9 12:50:40 isla-magica ata1: exception Emask 0x10 SAct 0x0 SErr
0x10000 action 0x42 frozen
Nov  9 12:50:40 isla-magica ata1: (irq_stat 0x00a00080, device exchanged)
Nov  9 12:50:40 isla-magica ata1: waiting for device to spin up (8 secs)
Nov  9 12:50:49 isla-magica ata1: soft resetting port
Nov  9 12:50:57 isla-magica (dschroeder-11893): starting (version
2.14.0), pid 11893 user 'dschroeder'
Nov  9 12:50:57 isla-magica (dschroeder-11893): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only
configuration source at posit
ion 0
Nov  9 12:50:57 isla-magica (dschroeder-11893): Resolved address
"xml:readwrite:/home/dschroeder/.gconf" to a writable configuration
source at position 1
Nov  9 12:50:57 isla-magica (dschroeder-11893): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
configuration source at positi
on 2
Nov  9 12:51:19 isla-magica ata1: softreset failed (timeout)
Nov  9 12:51:19 isla-magica ata1: softreset failed, retrying in 5 secs
Nov  9 12:51:24 isla-magica ata1: hard resetting port
Nov  9 12:51:56 isla-magica ata1: softreset failed (timeout)
Nov  9 12:51:56 isla-magica ata1: follow-up softreset failed, retrying
in 5 secs
Nov  9 12:52:01 isla-magica ata1: hard resetting port
Nov  9 12:52:33 isla-magica ata1: softreset failed (timeout)
Nov  9 12:52:33 isla-magica ata1: reset failed, giving up
Nov  9 12:52:33 isla-magica ata1: EH complete
Nov  9 12:53:12 isla-magica ata1: exception Emask 0x10 SAct 0x0 SErr
0xc0000 action 0x42 frozen
Nov  9 12:53:16 isla-magica ata1: soft resetting port
Nov  9 12:53:16 isla-magica ata1: SATA link down (SStatus 1 SControl 300)
Nov  9 12:53:16 isla-magica ata1: EH complete
Nov  9 12:53:22 isla-magica ata1: exception Emask 0x10 SAct 0x0 SErr
0x10000 action 0x42 frozen
Nov  9 12:53:22 isla-magica ata1: (irq_stat 0x00a00080, device exchanged)
Nov  9 12:53:22 isla-magica hub 1-2:1.0: port 2 disabled by hub (EMI?),
re-enabling...
Nov  9 12:53:22 isla-magica usb 1-2.2: USB disconnect, address 4
Nov  9 12:53:22 isla-magica usb 1-2.2: new low speed USB device using
ehci_hcd and address 7
Nov  9 12:53:22 isla-magica usb 1-2.2: configuration #1 chosen from 1 choice
Nov  9 12:53:22 isla-magica input: HID 0c12:0005 as /class/input/input3
Nov  9 12:53:22 isla-magica input: USB HID v1.00 Joystick [HID
0c12:0005] on usb-0000:00:0a.1-2.2
Nov  9 12:53:22 isla-magica ata1: waiting for device to spin up (8 secs)
Nov  9 12:53:30 isla-magica ata1: soft resetting port
Nov  9 12:54:00 isla-magica ata1: softreset failed (timeout)
Nov  9 12:54:00 isla-magica ata1: softreset failed, retrying in 5 secs
Nov  9 12:54:05 isla-magica ata1: hard resetting port
Nov  9 12:54:15 isla-magica ntpd[11442]: synchronized to 129.174.135.11,
stratum 2
Nov  9 12:54:15 isla-magica ntpd[11442]: kernel time sync enabled 0001
Nov  9 12:54:37 isla-magica ata1: softreset failed (timeout)
Nov  9 12:54:37 isla-magica ata1: follow-up softreset failed, retrying
in 5 secs
Nov  9 12:54:42 isla-magica ata1: hard resetting port
Nov  9 12:54:52 isla-magica hub 1-2:1.0: port 2 disabled by hub (EMI?),
re-enabling...
Nov  9 12:54:52 isla-magica usb 1-2.2: USB disconnect, address 7
Nov  9 12:54:52 isla-magica usb 1-2.2: new low speed USB device using
ehci_hcd and address 8
Nov  9 12:54:52 isla-magica usb 1-2.2: configuration #1 chosen from 1 choice
Nov  9 12:54:52 isla-magica input: HID 0c12:0005 as /class/input/input4
Nov  9 12:54:52 isla-magica input: USB HID v1.00 Joystick [HID
0c12:0005] on usb-0000:00:0a.1-2.2
Nov  9 12:55:15 isla-magica ata1: softreset failed (timeout)
Nov  9 12:55:15 isla-magica ata1: reset failed, giving up
Nov  9 12:55:15 isla-magica ata1: EH complete

</log-bad>

#1 lore raw
Quoted 10 lines · Daniel Schröder

Hello *,

a couple of weeks ago, i posted a "success" message. This time i have a strange issue to report. A couple of weeks, with only one Samsung HD401LJ and everything was fine. Yesterday, i put another drive a Samsung HD501LJ into the second bay and shortly after this. (After FDISK and MKFS and a couple of powercycles) The device is completely unresponsive. With this device on, Windows XP freezes instantly...Linux shows the following at turning on:

Quoted 2 lines

And everytime, when i played with this device, he said something about USB...WTF?! Same IRQ? I dont think so:

USB messages seem to be power supply related.. If you have another power supply available, try to use it for disks (using power supply w/o motherboard isn't difficult. just ask google) or buy a better one.

When PMP detection fails, did you have the first PMP port occupied? Sil3726/4726 PMPs fail to initialize if the first port isn't occupied. Dunno if it's those hardware's fault or driver's fault yet.

Signature · 1 line
tejun
#2 lore raw
Quoted 8 lines · Tejun Heo

USB messages seem to be power supply related.. If you have another power supply available, try to use it for disks (using power supply w/o motherboard isn't difficult. just ask google) or buy a better one.

When PMP detection fails, did you have the first PMP port occupied? Sil3726/4726 PMPs fail to initialize if the first port isn't occupied. Dunno if it's those hardware's fault or driver's fault yet.

Powersupply is 530W for one CPU, three internal SATA drives and one 7900GT. I think this should not be an issue.
The USB messages do not seem to be related with the eSATA thing. I have tested the device for the last time and the USB messages were not there. This time the "first" port was occupied. Finally, i guess, this device ST6600 by Stardom/Raidsonic has some "teething problems" and i will send this device back to the seller.

(If someone has trouble with this device also. The "symptoms":

- Only the first blue led, power on, is active.
- The "drive ready leds" are off even though ports are occupied.
- In the back of the device are several leds. A blue, a red and a green one are active. May be, there could be a meaning in this.

- If you boot Windows XP with this device connected or you plug in the device while Windows XP is running. XP instantly freezes and dies.
- Under Linux, the output is the following and unlike to XP the system stays stable.)

Thank you, for your ideas..

Daniel

<power on/off/on>
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x42 frozen
ata1: (irq_stat 0x00b00090, PHY RDY changed)
ata1: waiting for device to spin up (8 secs)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0x42 frozen
ata1: (irq_stat 0x01900090, PHY RDY changed)
ata1: soft resetting port
ata1: SATA link down (SStatus 1 SControl 300)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x42 frozen
ata1: (irq_stat 0x00b00090, PHY RDY changed)
ata1: waiting for device to spin up (8 secs)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: EH complete
</power on/off/on>