Skip to contentSkip to conversation

'kexec -l' problem at IA64 SN

DISCUSSION Jay Lan 2 participants 2 messages Nov 14, 2006

lore
Share & tools
lore

Jay Lan

author
#0 lore raw

Hi,

I finally got time to work on 'kexec -l' problem at SGI box. The 'kexec -l' always failed on "Invalid memory segment". I am using these patches:
kexec-tools-1.101-kdump10.patch kexec-tools-1.101-ia64-kdump10-efi-boot.patch clone-ia64_boot_param-kdump10.patch fix-paddr-vmcore-ELF
kexec-ia64-reset-vga (a special workaround from Nanhai to
handle vga i/o issue)
Note that 'kexec -p' worked fine for me.

It would try to add memory segment 0x4000000 - 0x4997fff, but failed in valid_memory_range() check.

It was the first segment it tried to load.

The kexec_info struct showed:
(gdb) p *(struct kexec_info *)0x607fffffffa0b338
$2 = {segment = 0x0, nr_segments = 0, entry = 0x0, rhdr = {ei_class = 0,

    ei_data = 0, e_type = 0, e_machine = 0, e_version = 0, e_flags = 0,
    e_phnum = 0, e_shnum = 0, e_shstrndx = 0, e_entry = 0, e_phoff = 0,
    e_shoff = 0, e_notenum = 0, e_phdr = 0x0, e_shdr = 0x0, e_note = 0x0,
    rel_addr = 0, rel_size = 0}, backup_start = 0, kexec_flags = 0}

and, the mem_phdr struct showed:
(gdb) p *(struct mem_phdr *) 0x6000000000014e20
$4 = {p_paddr = 67108864, p_vaddr = 11529215050363437056,
p_filesz = 10000768, p_memsz = 10000768, p_offset = 65536, p_data = 0x2000000000338010 "\004\200", p_type = 1, p_flags = 7, p_align = 65536}
(gdb)

The 'base' variable in elf_exec_load() at the time of calling add_segment() was 0.

Where did it go wrong? The phdr->p_paddr? The base? It was off by 0x3000000000. It needs adjustment, but where in the code and which value?

The 'kexec -p' worked fine.

Thanks,
- jay

#1 lore raw
Quoted 47 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jay Lan
Sent: 2006Äê11ÔÂ14ÈÕ 8:57
To: fastboot
Cc: Linux-IA64
Subject: 'kexec -l' problem at IA64 SN

Hi,

I finally got time to work on 'kexec -l' problem at SGI box. The 'kexec -l' always failed on "Invalid memory segment". I am using these patches:
kexec-tools-1.101-kdump10.patch kexec-tools-1.101-ia64-kdump10-efi-boot.patch clone-ia64_boot_param-kdump10.patch fix-paddr-vmcore-ELF
kexec-ia64-reset-vga (a special workaround from Nanhai to
handle vga i/o issue)
Note that 'kexec -p' worked fine for me.

It would try to add memory segment 0x4000000 - 0x4997fff, but failed in valid_memory_range() check.

It was the first segment it tried to load.

The kexec_info struct showed:
(gdb) p *(struct kexec_info *)0x607fffffffa0b338
$2 = {segment = 0x0, nr_segments = 0, entry = 0x0, rhdr = {ei_class = 0,

    ei_data = 0, e_type = 0, e_machine = 0, e_version = 0, e_flags = 0,
    e_phnum = 0, e_shnum = 0, e_shstrndx = 0, e_entry = 0, e_phoff = 0,
    e_shoff = 0, e_notenum = 0, e_phdr = 0x0, e_shdr = 0x0, e_note = 0x0,
    rel_addr = 0, rel_size = 0}, backup_start = 0, kexec_flags = 0}

and, the mem_phdr struct showed:
(gdb) p *(struct mem_phdr *) 0x6000000000014e20
$4 = {p_paddr = 67108864, p_vaddr = 11529215050363437056,
p_filesz = 10000768, p_memsz = 10000768, p_offset = 65536, p_data = 0x2000000000338010 "\004\200", p_type = 1, p_flags = 7, p_align = 65536}
(gdb)

The 'base' variable in elf_exec_load() at the time of calling add_segment() was 0.

Quoted 11 lines

Where did it go wrong? The phdr->p_paddr? The base? It was off by 0x3000000000. It needs adjustment, but where in the code and which value?

The 'kexec -p' worked fine.

Thanks,
- jay

Hi,
Kexec -l is still using the entry value of vmlinux while kexec -p can float it's loading address according to /proc/iomem.

I will provide a patch to kexec-tools later to fix it. Thanks
Zou Nan hai

Quoted 4 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html