Raid 1 up after raidhotadd without rebuild
Hello,
I'm trying to rebuild a raid1 array by adding the replacement disk (sda) to the old one (sdf). I zero'd the new disk (sda) and created the partition table corresponding to the existing one.
I adapted my raidtab to the new drive node (changed due to other disk replacement) and now I'm trying to add the new disk, but the raid 1 is not rebuilding, the newly added disk is marked as U(p) in the mdstat output.
Here's what I do step by step (mdstat output reduced to one raid array, but the problem exists with every partition used as a raid 1):
# cat /proc/mdstat
md1 : active raid1 sdf1[1]
112728000 blocks [2/1] [_U]
# raidhotadd /dev/md1 /dev/sda1 && cat /proc/mdstat
md1 : active raid1 sda1[1] sdf1[0]
112728000 blocks [2/2] [UU]
Thats it, no resync, nothing. When I do a fsck on the md1 there are errors en masse. raidtools don't even seem to touch sda1, since when I create a filesystem with content on it, I can mount it after adding it to the raid.
Any ideas why this is and how to fix it?
Thanks in advance & ciao,
elm
Here is the entry in the syslog:
==
Nov 15 09:34:46 server md: bind<sda1> Nov 15 09:34:46 server RAID1 conf printout: Nov 15 09:34:46 server --- wd:1 rd:2 Nov 15 09:34:46 server disk 0, wo:1, o:1, dev:sda1 Nov 15 09:34:46 server disk 1, wo:0, o:1, dev:sdf1 Nov 15 09:34:46 server md: syncing RAID array md2 Nov 15 09:34:46 server md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. Nov 15 09:34:46 server md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction. Nov 15 09:34:46 server md: using 128k window, over a total of 112728000 blocks. Nov 15 09:34:46 server md: md1: sync done. Nov 15 09:34:46 server RAID1 conf printout: Nov 15 09:34:46 server --- wd:2 rd:2 Nov 15 09:34:46 server disk 0, wo:0, o:1, dev:sda1 Nov 15 09:34:46 server disk 1, wo:0, o:1, dev:sdf1
==
Here is the raidtab:
==
raiddev /dev/md1
raid-level 1
nr-raid-disks 2
nr-spare-disks 0
persistent-superblock 1chunk-size 8k
device /dev/sda1
raid-disk 0
device /dev/sdf1
raid-disk 1
==
Signature · 6 lines
"Religion und Familie sind die beiden größten Feinde des Fortschritts." (André Gide (1869 - 1951), französischer Schriftsteller) - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 2 lines · On Tuesday November 14, [email protected] wrote:
Any ideas why this is and how to fix it?
You don't mention a kernel version. If it is 2.6.18, upgrade to 2.6.18.2.
NeilBrown
Quoted 5 lines · Neil Brown
Quoted 1 line · On Tuesday November 14, [email protected] wrote:
Any ideas why this is and how to fix it?
You don't mention a kernel version. If it is 2.6.18, upgrade to 2.6.18.2.
Its 2.6.18, I'll upgrade and try, I checked the log and guess it is
"[PATCH] md: Fix bug where spares don't always get rebuilt properly when they become live.". Exactly my problem.
Thanks for the fast help.
ciao,
elm