Can't init device hci0: Connection timed out (110)

Bluez-users Simon Williams 2 participants 3 messages Nov 22, 2006 – Nov 23, 2006 Bluetooth drivers

Share & tools

Simon Williams

author

2006-11-22 17:24 UTC #0 lore raw

Hello again. I've finally managed to get the device (my 3Com 3CRWB6096 Version 2.0 PCMCIA Card) to show up in hciconfig (I had the wrong firmware).

Dbus is running, all the bluetooth services are running. But I get the following...

# hciconfig
hci0:   Type: PCCARD
         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
         DOWN INIT RUNNING
         RX bytes:0 acl:0 sco:0 events:0 errors:0
         TX bytes:4 acl:0 sco:0 commands:1 errors:0

# hciconfig hci0 up
Can't init device hci0: Connection timed out (110)
# hciconfig
hci0:   Type: PCCARD
         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
         DOWN
         RX bytes:0 acl:0 sco:0 events:0 errors:0
         TX bytes:4 acl:0 sco:0 commands:2 errors:0

Is there some way I can manually probe the card for it's address to find out if it's bluez or the driver?
Shouldn't it have an address even when it's down?

Please, any other suggestions very much appreciated. Thanks in advance
Simon

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Andres Vargas - zodman

2006-11-23 07:21 UTC #1 lore raw

get more errors

first kill hcid process

run:

$ hcid -n -f /dirof/hcid.conf

and it get more errors

Quoted 39 lines · On Wed, 22 Nov 2006 17:24:21 +0000 Simon Williams…

Hello again. I've finally managed to get the device (my 3Com 3CRWB6096 Version 2.0 PCMCIA Card) to show up in hciconfig (I had the wrong firmware).
Dbus is running, all the bluetooth services are running. But I get the following...
# hciconfig
hci0:   Type: PCCARD
         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
         DOWN INIT RUNNING
         RX bytes:0 acl:0 sco:0 events:0 errors:0
         TX bytes:4 acl:0 sco:0 commands:1 errors:0
# hciconfig hci0 up
Can't init device hci0: Connection timed out (110)
# hciconfig
hci0:   Type: PCCARD
         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
         DOWN
         RX bytes:0 acl:0 sco:0 events:0 errors:0
         TX bytes:4 acl:0 sco:0 commands:2 errors:0
Is there some way I can manually probe the card for it's address to find out if it's bluez or the driver?
Shouldn't it have an address even when it's down?
Please, any other suggestions very much appreciated. Thanks in advance
Simon
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Signature · 9 lines

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Simon Williams

author

2006-11-23 12:56 UTC #2 lore raw

Quoted 9 lines · Andres Vargas - zodman

get more errors
first kill hcid process
run:
$ hcid -n -f /dirof/hcid.conf
and it get more errors

Not really. The error appears to be with the driver, and not hcid. All that I get from the above is this, which I already had in my syslogs.

hcid[20521]: Bluetooth HCI daemon
hcid[20521]: Register path:/org/bluez fallback:1 hcid[20521]: HCI dev 0 registered
hcid[20521]: Register path:/org/bluez/hci0 fallback:0 hcid[20522]: Can't init device hci0: Connection timed out (110)

Quoted 33 lines

Quoted 30 lines · On Wed, 22 Nov 2006 17:24:21 +0000 Simon Williams…
Hello again. I've finally managed to get the device (my 3Com 3CRWB6096 Version 2.0 PCMCIA Card) to show up in hciconfig (I had the wrong firmware).
Dbus is running, all the bluetooth services are running. But I get the following...
# hciconfig
hci0:   Type: PCCARD
         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
         DOWN INIT RUNNING
         RX bytes:0 acl:0 sco:0 events:0 errors:0
         TX bytes:4 acl:0 sco:0 commands:1 errors:0
# hciconfig hci0 up
Can't init device hci0: Connection timed out (110)
# hciconfig
hci0:   Type: PCCARD
         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
         DOWN
         RX bytes:0 acl:0 sco:0 events:0 errors:0
         TX bytes:4 acl:0 sco:0 commands:2 errors:0
Is there some way I can manually probe the card for it's address to find out if it's bluez or the driver?
Shouldn't it have an address even when it's down?
Please, any other suggestions very much appreciated. Thanks in advance
Simon

Quoted 11 lines

Quoted 9 lines
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users