'gd' is getting corrupted.
I'm porting u-boot to a Sigma Designs em8620L based board. The em8620L is an SOC with an ARMv4t core (pT-110).
U-boot gets to the prompt now. Commands in cmd_mem.c, and loads are working fine. However., 'printenv' never worked. My environment is in the 'eeprom'. I did some printfs and found that., the 'gd' is getting changed in between the 'for loop calling main_loop()' in lib_arm/board.c to the 'do_printenv' command that is called from the main_loop().
The commands that I've configured to use are (CFG_CMD_MEMORY | CFG_CMD_EEPROM | CFG_CMD_LOADB | CFG_CMD_LOADS | CFG_CMD_REGINFO).
Any pointers to common mistakes could be very helpful.
Thanks.
Signature · 10 lines
Joe Steeve Sliceware Private Limited -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: OpenPGP digital signature Url : http://lists.denx.de/pipermail/u-boot/attachments/20061124/5eb9612b/attachment.pgp