Skip to contentSkip to conversation

2.6.19: skb_over_panic, followed by a BUG at net/core/skbuff.c:93

DISCUSSION Tomas Carnecky 3 participants 3 messages Dec 2, 2006

lore
Share & tools
lore
#0 lore raw

I only have a screenshot with no backtrace, if you want to see the function names in the backtrace, please tell me what I need to do.

http://dbservice.com/ftpdir/tom/kernel-bug.jpg

I was running a 2.6.19-ge??? kernel before (I don't remember which version exactly) and it was running fine, today I upgraded to v2.6.19 and now I have this crash. 2.6.18 works fine, too.

The bug happens when gentoo wants to bring up eth0 (starting the lo device works fine), even a simple 'ifconfig eth0 192.168.0.11' will crash the kernel.

The computer is a Shuttle XPC with an AMD 64bit CPU, network card is integrated in the nforce chipset.

tom

#1 lore raw
Quoted 9 lines · Tomas Carnecky

I only have a screenshot with no backtrace, if you want to see the function names in the backtrace, please tell me what I need to do.

http://dbservice.com/ftpdir/tom/kernel-bug.jpg

I was running a 2.6.19-ge??? kernel before (I don't remember which version exactly) and it was running fine, today I upgraded to v2.6.19 and now I have this crash. 2.6.18 works fine, too.

Quoted 6 lines

The bug happens when gentoo wants to bring up eth0 (starting the lo device works fine), even a simple 'ifconfig eth0 192.168.0.11' will crash the kernel.

The computer is a Shuttle XPC with an AMD 64bit CPU, network card is integrated in the nforce chipset.

I just faced the same problem, but on a HPPA (PARISC) box with 32bit kernel. Just reported at the parisc-linux kernel mailing list as well:
http://lists.parisc-linux.org/pipermail/parisc-linux/2006-December/030810.html

Summary:

Just got a kernel crash with our git tree code. Not sure if this is generic problem or related to parisc. I didn't investigated any further.
Just reporting here in case someone has an idea. IPV6 and serial console were enabled.
Turning IPV6 off fixed it for me.

Helge
-----------
rtc-test rtc-test.0: setting the system clock to 2006-12-02 14:04:48 (1165068288)
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.178.50, my address is 192.168.178.70
IP-Config: Complete:

      device=eth0, addr=192.168.178.70, mask=255.255.255.0,
gw=192.168.178.1,
     host=c3000, domain=box, nis-domain=(none),
     bootserver=192.168.178.50, rootserver=192.168.178.50, rootpath=

md: Autodetecting RAID arrays.
skb_over_panic: text:1045715c len:56 put:16 head:8fa40a80 data:8fa40a90 tail:8fa40ac8 end:8fa40ac0 dev:eth0
kernel BUG at net/core/skbuff.c:93!

Backtrace:
 [<103e4b44>] skb_over_panic+0x74/0x84
 [<10457164>] ndisc_send_rs+0x268/0x4ac
 [<1044d15c>] addrconf_dad_completed+0x84/0xd8
 [<1044d09c>] addrconf_dad_timer+0xe8/0x124
 [<10131360>] run_timer_softirq+0x140/0x1dc
 [<1012c7b0>] __do_softirq+0x60/0xcc
 [<101042f0>] do_softirq+0x38/0x48
 [<101084ac>] do_cpu_irq_mask+0xf0/0x11c
 [<1010b068>] intr_return+0x0/0xc
 [<102a19ac>] serial8250_console_putchar+0x34/0x108
 [<10127370>] vprintk+0x2b8/0x2f4
 [<10127368>] vprintk+0x2b0/0x2f4
 [<101270ac>] printk+0x20/0x2c
 [<10398220>] autostart_arrays+0x28/0xd4
 [<103960fc>] md_ioctl+0x44c/0x474
 [<1023e6bc>] blkdev_driver_ioctl+0x58/0x64

Kernel panic - not syncing: BUG!
#2 lore raw
Quoted 7 lines · Helge Deller
Quoted 3 lines

The bug happens when gentoo wants to bring up eth0 (starting the lo device works fine), even a simple 'ifconfig eth0 192.168.0.11' will crash the kernel.

I just faced the same problem, but on a HPPA (PARISC) box with 32bit kernel. Just reported at the parisc-linux kernel mailing list as well:
http://lists.parisc-linux.org/pipermail/parisc-linux/2006-December/030810.html

Please read the mailing list archives...this has been covered a number of times in the past few days.

Phil