kernel 2.6.19 and RealTek RTL8139 interrupt
Hi guys,
I'm using FC5 with vanilla kernels.
Everything worked great until 2.6.19 was released. Not each time I'm trying to up my eth0 kernel produces this:
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 irq 18: nobody cared (try booting with the "irqpoll" option)
[<c01391aa>] __report_bad_irq+0x36/0x7d [<c0139379>] note_interrupt+0x188/0x1c3 [<c0138a19>] handle_IRQ_event+0x1a/0x3f [<c01396ca>] handle_fasteoi_irq+0x61/0x73 [<c0104e34>] do_IRQ+0x6b/0x83 [<c0120c76>] sys_rt_sigprocmask+0x80/0x93 [<c01034a2>] common_interrupt+0x1a/0x20 =======================
handlers:
[<c0257416>] (rtl8139_interrupt+0x0/0x3aa)
Disabling IRQ #18
I'm posting it here b/c I don't think it's a normal behavior. Here is the diff of dmesg output between 2.6.18.3 and 2.6.19:
140,142c141,143
< 8139too Fast Ethernet driver 0.9.27
< ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 20 (level, low) -> IRQ 20 < eth0: RealTek RTL8139 at 0xf8806c00, 00:40:45:28:2c:ae, IRQ 20
---
Quoted 3 lines
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 20 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at0xf8806c00, 00:40:45:28:2c:ae, IRQ 18
147c148
< ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
---
Quoted 1 line
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
197,198c198,200
< TCP bic registered
< Initializing IPsec netlink socket
---
Quoted 3 lines
input: AT Translated Set 2 keyboard as /class/input/input0 TCP cubic registered
Initializing XFRM netlink socket
294,306c305,310
< Non-volatile memory driver v1.2
< usb 4-2: new full speed USB device using uhci_hcd and address 2 < PM: Adding info for usb:4-2
< PM: Adding info for No Bus:usbdev4.2_ep00
< usb 4-2: configuration #1 chosen from 1 choice
< PM: Adding info for usb:4-2:1.0
< PM: Adding info for No Bus:usbdev4.2_ep81
< PM: Adding info for No Bus:usbdev4.2_ep02
< PM: Adding info for No Bus:usbdev4.2_ep82
< PM: Adding info for usb:4-2:1.1
< PM: Adding info for No Bus:usbdev4.2_ep03
< PM: Adding info for No Bus:usbdev4.2_ep83
< Bluetooth: Core ver 2.10
---
Quoted 6 lines
PM: Adding info for No Bus:usbdev3.2_ep02
PM: Adding info for No Bus:usbdev3.2_ep82
PM: Adding info for usb:3-2:1.1
PM: Adding info for No Bus:usbdev3.2_ep03
PM: Adding info for No Bus:usbdev3.2_ep83
Bluetooth: Core ver 2.11
312,315c316,319
< PM: Removing info for No Bus:usbdev4.2_ep03
< PM: Removing info for No Bus:usbdev4.2_ep83
< PM: Adding info for No Bus:usbdev4.2_ep03
< PM: Adding info for No Bus:usbdev4.2_ep83
---
Quoted 4 lines
PM: Removing info for No Bus:usbdev3.2_ep03
PM: Removing info for No Bus:usbdev3.2_ep83
PM: Adding info for No Bus:usbdev3.2_ep03
PM: Adding info for No Bus:usbdev3.2_ep83
317,320c321
< usbcore: registered new driver hci_usb
< PM: Adding info for ieee1394:00012f650000d9b3
< ieee1394: Host added: ID:BUS[0-00:1023] GUID[00012f650000d9b3] < PM: Adding info for ieee1394:00012f650000d9b3-0
---
Quoted 1 line
usbcore: registered new interface driver
hci_usb
322c323
< device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected]
---
Quoted 1 line
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: [email protected]
Quoted 31 lines · On Tue, 05 Dec 2006 21:36:37 +0300 Oleg Mikheev <[email protected]> wrote:
Hi guys,
I'm using FC5 with vanilla kernels.
Everything worked great until 2.6.19 was released. Not each time I'm trying to up my eth0 kernel produces this:eth0: link up, 100Mbps, full-duplex, lpa
0x45E1irq 18: nobody cared (try booting with the "irqpoll" option)[<c01391aa>] __report_bad_irq+0x36/0x7d [<c0139379>] note_interrupt+0x188/0x1c3 [<c0138a19>] handle_IRQ_event+0x1a/0x3f [<c01396ca>] handle_fasteoi_irq+0x61/0x73 [<c0104e34>] do_IRQ+0x6b/0x83 [<c0120c76>] sys_rt_sigprocmask+0x80/0x93 [<c01034a2>] common_interrupt+0x1a/0x20 =======================handlers:
[<c0257416>] (rtl8139_interrupt+0x0/0x3aa)
Disabling IRQ #18I'm posting it here b/c I don't think it's a normal behavior. Here is the diff of dmesg output between 2.6.18.3 and 2.6.19:
140,142c141,143
< 8139too Fast Ethernet driver 0.9.27
< ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 20 (level, low) -> IRQ 20 < eth0: RealTek RTL8139 at0xf8806c00, 00:40:45:28:2c:ae, IRQ 20
---
Quoted 7 lines
Quoted 3 lines
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 20 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at0xf8806c00, 00:40:45:28:2c:ae, IRQ 18147c148
< ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
---Quoted 1 line
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
This looks like http://bugzilla.kernel.org/show_bug.cgi?id=7601
Please see http://bugzilla.kernel.org/show_bug.cgi?id=7601#c10 for a possible fix.
That fix is in mainline now, so testing Linus's current tree would suit too, thanks.