2.6.19-git20 cciss: cmd f7b00000 timedout
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
All,
I tried out the 2.6.19-git20 kernel on one of my machines (HP
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.
I get the error (cciss: cmd f7b00000 timedout) with Buffer I/O error on device cciss/c (all cards, and disks) logical block 0, 1, 2, etc
Steve Roemen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFgZk5cA4cgQlZoQ8RAgUYAKCCfn+SGLPy+/Ng/7Lyh/m/AigiJwCcDEO3 vNUZctiG+TxZ2oPcOVVigRY=
=6WKY
-----END PGP SIGNATURE-----
Quoted 10 lines · Steve Roemen
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1All,
I tried out the 2.6.19-git20 kernel on one of my machines (HP
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.I get the error (cciss: cmd
f7b00000timedout) with Buffer I/O error on device cciss/c (all cards, and disks) logical block 0, 1, 2, etc
I saw this on another box, but it works on the ones that I have. Does 2.6.19 work? Any chance you can try and narrow down when it broke?
Signature · 1 line
Jens Axboe
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
2.6.19 does the same thing, except it's a cmd f7f00000 timedout error.
2.6.18 works just fine though.
Steve
Quoted 9 lines · Jens Axboe
Quoted 8 lines · Steve Roemen
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1All,
I tried out the 2.6.19-git20 kernel on one of my machines (HP
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.
Quoted 6 lines
Quoted 2 lines
I get the error (cciss: cmd
f7b00000timedout) with Buffer I/O error on device cciss/c (all cards, and disks) logical block 0, 1, 2, etcI saw this on another box, but it works on the ones that I have. Does 2.6.19 work? Any chance you can try and narrow down when it broke?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFgag7cA4cgQlZoQ8RAiXhAJ9eRe0Nh3JqFKO2H6iYKmxsVIKGDACgrCrx QWG2sAQH4bL8+fa5mPnVhnM=
=DxGc
-----END PGP SIGNATURE-----
Quoted 2 lines · Steve Roemen
2.6.19 does the same thing, except it's a cmd
f7f00000timedout error.<br>
Please don't send html only emails, that's just impossible to work with.
Quoted 1 line
2.6.18 works just fine though.<br>
So the question is when it broke between 2.6.18 and 2.6.19. Can you try and pin it down? Either use git bisect, or just start with the 2.6.19-rc kernels and see which is the last one that works.
Signature · 1 line
Jens Axboe
Quoted 18 lines
-----Original Message-----
From: Jens Axboe [mailto:[email protected]]
Sent: Thursday, December 14, 2006 12:51 PM
To: Steve Roemen
Cc: LKML; ISS StorageDev; Miller, Mike (OS Dev)
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 8 lines · Steve Roemen
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1All,
I tried out the 2.6.19-git20 kernel on one of my machines (HP
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.
Quoted 6 lines
Quoted 1 line
I get the error (cciss: cmd
f7b00000timedout) with BufferI/O error
Quoted 1 line
on device cciss/c (all cards, and disks) logical block 0, 1, 2, etc
I saw this on another box, but it works on the ones that I have. Does 2.6.19 work? Any chance you can try and narrow down when it broke?
Jens/Steve:
We also encountered a time out issue on the 642. This one is connected to an MSA500. Do either of you have MSA500? What controller fw are you running? Check /proc/driver/cciss/ccissN.
mikem
Quoted 5 lines
--
Jens Axboe
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
MIke, Yes it's connected to a MSA 500 G2
the two 642's firmware are 2.34 for card 1, and 2.58 for card 2
Steve
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFgbB1cA4cgQlZoQ8RAoWGAKCPgdqX2QYl69V0i7cJACmP3LJ40wCfX932 ZEZEQGPhxYhJej0ovQ+6Spw=
=uIik
-----END PGP SIGNATURE-----
Quoted 22 lines · Mike (OS Dev)
Quoted 22 lines
-----Original Message-----
From: Jens Axboe [mailto:[email protected]]
Sent: Thursday, December 14, 2006 12:51 PM
To: Steve Roemen
Cc: LKML; ISS StorageDev; Miller, Mike (OS Dev)
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 9 lines · Steve Roemen
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1All,
I tried out the 2.6.19-git20 kernel on one of my machines (HP
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.I get the error (cciss: cmd
f7b00000timedout) with BufferI/O error
Quoted 1 line
on device cciss/c (all cards, and disks) logical block 0, 1, 2, etc
Quoted 7 lines
Quoted 2 lines
I saw this on another box, but it works on the ones that I have. Does 2.6.19 work? Any chance you can try and narrow down when it broke?
Jens/Steve:
We also encountered a time out issue on the 642. This one is connected to an MSA500. Do either of you have MSA500? What controller fw are you running? Check/proc/driver/cciss/ccissN.
I think the case I know about here is an MSA500 as well, I can check in the morning.
Signature · 1 line
Jens Axboe
Quoted 9 lines
-----Original Message-----
From: Steve Roemen [mailto:[email protected]]
Sent: Thursday, December 14, 2006 2:14 PM
To: Miller, Mike (OS Dev)
Cc: Jens Axboe; LKML; ISS StorageDev; Frazier, Daniel Kent
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedout
Quoted 6 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1MIke, Yes it's connected to a MSA 500 G2
the two 642's firmware are 2.34 for card 1, and 2.58 for card 2
What's the fw on the msa? You should be able to get that from the LCD display.
mikem
Quoted 13 lines
Steve
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.orgiD8DBQFFgbB1cA4cgQlZoQ8RAoWGAKCPgdqX2QYl69V0i7cJACmP3LJ40wCfX932 ZEZEQGPhxYhJej0ovQ+6Spw=
=uIik
-----END PGP SIGNATURE-----
Quoted 22 lines · Mike (OS Dev)
Quoted 22 lines
-----Original Message-----
From: Jens Axboe [mailto:[email protected]]
Sent: Thursday, December 14, 2006 12:51 PM
To: Steve Roemen
Cc: LKML; ISS StorageDev; Miller, Mike (OS Dev)
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 9 lines · Steve Roemen
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1All,
I tried out the 2.6.19-git20 kernel on one of my machines (HP
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.I get the error (cciss: cmd
f7b00000timedout) with BufferI/O error
Quoted 1 line
on device cciss/c (all cards, and disks) logical block 0, 1, 2, etc
Quoted 7 lines
Quoted 2 lines
I saw this on another box, but it works on the ones that I have. Does 2.6.19 work? Any chance you can try and narrow down when it broke?
Jens/Steve:
We also encountered a time out issue on the 642. This one is connected to an MSA500. Do either of you have MSA500? What controller fw are you running? Check/proc/driver/cciss/ccissN.
fyi, we've been seeing this in Debian too (which is why Mike added me to the CC list), and I've narrowed it down to the 2TB patch that went into 2.6.19:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=402787
Signature · 1 line
dann frazier | HP Open Source and Linux Organization
Quoted 41 lines
-----Original Message-----
From: Frazier, Daniel Kent
Sent: Thursday, December 14, 2006 3:12 PM
To: Miller, Mike (OS Dev)
Cc: Jens Axboe; Steve Roemen; LKML; ISS StorageDev
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 9 lines · Mike (OS Dev)
Quoted 9 lines
-----Original Message-----
From: Jens Axboe [mailto:[email protected]]
Sent: Thursday, December 14, 2006 12:51 PM
To: Steve Roemen
Cc: LKML; ISS StorageDev; Miller, Mike (OS Dev)
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 6 lines
Quoted 6 lines · Steve Roemen
Quoted 5 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1All,
I tried out the 2.6.19-git20 kernel on one of mymachines (HP
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.
I get the error (cciss: cmd
f7b00000timedout) with BufferI/O error
Quoted 2 lines
on device cciss/c (all cards, and disks) logical block 0, 1, 2, etc
Quoted 6 lines
Quoted 3 lines
I saw this on another box, but it works on the ones that I have. Does
2.6.19 work? Any chance you can try and narrow down when it broke?Jens/Steve:
We also encountered a time out issue on the 642. This oneis connected
Quoted 8 lines
Quoted 1 line
to an MSA500. Do either of you have MSA500? What controller
fw are you
Quoted 1 line
running? Check
/proc/driver/cciss/ccissN.fyi, we've been seeing this in Debian too (which is why Mike added me to the CC list), and I've narrowed it down to the 2TB patch that went into 2.6.19:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=402787
Hmmmm. Dann, did you see this on 32-bit Debian? I have this running in the lab on x86_64 and ia64. Someone else was _supposed_ to test ia32 for me. Dammit.
Jens/Steve:
Are your os'es 32-bit?
mikem
Quoted 5 lines
--
dann frazier | HP Open Source and Linux Organization
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Yes, 32bit Debian
Quoted 60 lines · Mike (OS Dev)
Quoted 38 lines
-----Original Message-----
From: Frazier, Daniel Kent
Sent: Thursday, December 14, 2006 3:12 PM
To: Miller, Mike (OS Dev)
Cc: Jens Axboe; Steve Roemen; LKML; ISS StorageDev
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 9 lines · Mike (OS Dev)
Quoted 9 lines
-----Original Message-----
From: Jens Axboe [mailto:[email protected]]
Sent: Thursday, December 14, 2006 12:51 PM
To: Steve Roemen
Cc: LKML; ISS StorageDev; Miller, Mike (OS Dev)
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 6 lines
Quoted 6 lines · Steve Roemen
Quoted 5 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1All,
I tried out the 2.6.19-git20 kernel on one of mymachines (HP
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.
I get the error (cciss: cmd
f7b00000timedout) with BufferQuoted 8 lines
Quoted 6 lines
I/O error
Quoted 2 lines
on device cciss/c (all cards, and disks) logical block 0, 1, 2, etc
I saw this on another box, but it works on the ones that I have. Does
2.6.19 work? Any chance you can try and narrow down when it broke?Jens/Steve:
We also encountered a time out issue on the 642. This oneQuoted 8 lines
is connected
Quoted 1 line
to an MSA500. Do either of you have MSA500? What controller
fw are you
Quoted 1 line
running? Check
/proc/driver/cciss/ccissN.fyi, we've been seeing this in Debian too (which is why Mike added me to the CC list), and I've narrowed it down to the 2TB patch that went into 2.6.19:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=402787Hmmmm. Dann, did you see this on 32-bit Debian? I have this running in the lab on
x86_64and ia64. Someone else was _supposed_ to test ia32 for me. Dammit.Jens/Steve:
Are your os'es 32-bit?mikem
Quoted 1 line
--
Quoted 7 lines
Quoted 2 lines
dann frazier | HP Open Source and Linux Organization
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFgc6UcA4cgQlZoQ8RAnRHAKDRshyyEIJTECKRTe/ghkNNkC8a0QCfQYnO To0nPyou9F3OWbyxzTnZ5JU=
=0z54
-----END PGP SIGNATURE-----
Quoted 1 line · Mike (OS Dev)
Hmmmm. Dann, did you see this on 32-bit Debian?
yep - all reports I've seen so far are on i386
Quoted 50 lines · Mike (OS Dev)
Quoted 41 lines
-----Original Message-----
From: Frazier, Daniel Kent
Sent: Thursday, December 14, 2006 3:12 PM
To: Miller, Mike (OS Dev)
Cc: Jens Axboe; Steve Roemen; LKML; ISS StorageDev
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 9 lines · Mike (OS Dev)
Quoted 9 lines
-----Original Message-----
From: Jens Axboe [mailto:[email protected]]
Sent: Thursday, December 14, 2006 12:51 PM
To: Steve Roemen
Cc: LKML; ISS StorageDev; Miller, Mike (OS Dev)
Subject: Re: 2.6.19-git20 cciss: cmdf7b00000timedoutQuoted 6 lines
Quoted 6 lines · Steve Roemen
Quoted 5 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1All,
I tried out the 2.6.19-git20 kernel on one of mymachines (HP
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
DL380 G3) that has the on board 5i controller (disabled), 2 smart array 642 controllers.
I get the error (cciss: cmd
f7b00000timedout) with BufferI/O error
Quoted 2 lines
on device cciss/c (all cards, and disks) logical block 0, 1, 2, etc
Quoted 6 lines
Quoted 3 lines
I saw this on another box, but it works on the ones that I have. Does
2.6.19 work? Any chance you can try and narrow down when it broke?Jens/Steve:
We also encountered a time out issue on the 642. This oneis connected
Quoted 8 lines
Quoted 1 line
to an MSA500. Do either of you have MSA500? What controller
fw are you
Quoted 1 line
running? Check
/proc/driver/cciss/ccissN.fyi, we've been seeing this in Debian too (which is why Mike added me to the CC list), and I've narrowed it down to the 2TB patch that went into 2.6.19:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=402787
Quoted 6 lines
Hmmmm. Dann, did you see this on 32-bit Debian? I have this running in the lab on
x86_64and ia64. Someone else was _supposed_ to test ia32 for me. Dammit.Jens/Steve:
Are your os'es 32-bit?
Yep, the machine I saw this on is 32-bit. The one I tested on myself is x86-64, and that works. It's not driving an MSA500 either, but it's a data point for you.
Signature · 1 line
Jens Axboe