Skip to contentSkip to conversation

ADEOS IPIPE PPC patches upgrade

PATCH In review Wolfgang Grandegger 2 participants 5 messages Dec 18, 2006 – Dec 19, 2006

Subsystems (9)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ADEOS IPIPE PPC patches upgrade

Hallo,

attached is patch for Xenomai upgrading the ADEOS IPIPE patches for the PPC tree. Here is the ChangeLog entry:

2006-12-18 Wolfgang Grandegger <[email protected]>

* ksrc/arch/powerpc/patches: Upgrade to 2.6.14-ppc-1.5-02, 2.6.18-ppc-1.5-01 and 2.6.19-ppc-1.5-01. These patches fix the problems with PIC for Galileo's GT64260 reported by Antonio Barbalace and add support for 2.6.19.

Wolfgang.

#1 lore raw
Quoted 11 lines · On Mon, 18 Dec 2006 13:12:54 +0100 Wolfgang Grandegger <[email protected]> wrote:

Hallo,

attached is patch for Xenomai upgrading the ADEOS IPIPE patches for the PPC tree. Here is the ChangeLog entry:

2006-12-18 Wolfgang Grandegger <[email protected]>

* ksrc/arch/powerpc/patches: Upgrade to 2.6.14-ppc-1.5-02, 2.6.18-ppc-1.5-01 and 2.6.19-ppc-1.5-01. These patches fix the problems with PIC for Galileo's GT64260 reported by Antonio Barbalace and add support for 2.6.19.

Hi,

Got the same for 2.6.19 on powerpc arch ?
Or should I try to port it as I did for 2.6.18 ?

Ben

#2 lore raw
Quoted 14 lines · Benjamin Zores
Quoted 10 lines · On Mon, 18 Dec 2006 13:12:54 +0100 Wolfgang Grandegger <[email protected]> wrote:

Hallo,

attached is patch for Xenomai upgrading the ADEOS IPIPE patches for the PPC tree. Here is the ChangeLog entry:

2006-12-18 Wolfgang Grandegger <[email protected]>

* ksrc/arch/powerpc/patches: Upgrade to 2.6.14-ppc-1.5-02, 2.6.18-ppc-1.5-01 and 2.6.19-ppc-1.5-01. These patches fix the problems with PIC for Galileo's GT64260 reported by Antonio Barbalace and add support for 2.6.19.

Quoted 4 lines

Hi,

Got the same for 2.6.19 on powerpc arch ?
Or should I try to port it as I did for 2.6.18 ?

I don't understand your questions. These patches are for the PPC tree. The POWERPC is still not supported. Do you already have a working port for the PowerPC tree 2.6.18?

Wolfgang.

#3 lore raw
Quoted 3 lines · On Mon, 18 Dec 2006 14:06:15 +0100 Wolfgang Grandegger <[email protected]> wrote:

I don't understand your questions. These patches are for the PPC tree. The POWERPC is still not supported. Do you already have a working port for the PowerPC tree 2.6.18?

I send one a month ago but which wasn't 100% complete.
Now, here's an updated one for both ppc and powerpc arch.
It based on your patch + the equivalent functions ported to merged powerpc architecture. This time it should compile fine but i haven't tested if ppc arch still works (i can't do so).

I just remove the xenomai parts from your patch (which obviously had nothing to do in adeos patch itself).

With ipipe enabled on my card, the kernels boots up
but still hangs due to IRQ problems has it used to do in 2.6.18.
It seems to hang at SATA driver load (does the same for USB/I2C and so on after all)
but if I had printk() in each function from ipipe-root.c it goes in an endless
loop of:

...
__ipipe_handle_irq:226
__ipipe_do_timer:404
__ipipe_grab_timer:357
__ipipe_handle_irq:226
__ipipe_do_timer:404
__ipipe_grab_timer:357
...

and seems to never go further :-(

Do you have an idea where and why this might come from ?
FYI, the vanilla 2.6.19 kernel boots up my card fine and goes to userspace but seems to also hang a few time later (but at least it boots up to user space).

Anyhow, please consider this patch for review and if possible test it/apply it.

Ben

arch/powerpc/Kconfig +2 -0
diff -Naur linux-2.6.19.orig/arch/powerpc/Kconfig linux-2.6.19.ipipe/arch/powerpc/Kconfig
@@ -613,6 +613,8 @@
 
 menu "Kernel options"
 
+source "kernel/ipipe/Kconfig"
+
 config HIGHMEM
 	bool "High memory support"
 	depends on PPC32
arch/powerpc/kernel/entry_32.S +92 -0

140 lines not on this page · raw message

arch/powerpc/kernel/head_32.S +15 -1
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/head_32.S linux-2.6.19.ipipe/arch/powerpc/kernel/head_32.S
@@ -329,6 +329,12 @@
 	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
 			  ret_from_except_full)
 
+#ifdef CONFIG_IPIPE
+#define EXC_XFER_IPIPE(n, hdlr)         \
+       EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+                         __ipipe_ret_from_except)
+#endif /* CONFIG_IPIPE */
+        
 #define EXC_XFER_LITE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
@@ -418,8 +424,12 @@
 	EXC_XFER_EE_LITE(0x400, handle_page_fault)
 
 /* External interrupt */
+#ifdef CONFIG_IPIPE
+        EXCEPTION(0x500, HardwareInterrupt, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
+#endif /* CONFIG_IPIPE */
+        
 /* Alignment exception */
 	. = 0x600
 Alignment:
@@ -443,7 +453,11 @@
 	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
 /* Decrementer */
+#ifdef CONFIG_IPIPE
+        EXCEPTION(0x900, Decrementer, __ipipe_grab_timer, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+#endif /* CONFIG_IPIPE */
 
 	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
arch/powerpc/kernel/head_44x.S +5 -1
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/head_44x.S linux-2.6.19.ipipe/arch/powerpc/kernel/head_44x.S
@@ -427,8 +427,12 @@
 	INSTRUCTION_STORAGE_EXCEPTION
 
 	/* External Input Interrupt */
+#ifdef CONFIG_IPIPE
+        EXCEPTION(0x0500, ExternalInput, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
-
+#endif /* CONFIG_IPIPE */
+        
 	/* Alignment Interrupt */
 	ALIGNMENT_EXCEPTION
 
arch/powerpc/kernel/head_4xx.S +16 -2
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/head_4xx.S linux-2.6.19.ipipe/arch/powerpc/kernel/head_4xx.S
@@ -228,6 +228,12 @@
 	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
 			  ret_from_except_full)
 
+#ifdef CONFIG_IPIPE
+#define EXC_XFER_IPIPE(n, hdlr)         \
+       EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+                         __ipipe_ret_from_except)
+#endif /* CONFIG_IPIPE */
+        
 #define EXC_XFER_LITE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
@@ -396,8 +402,12 @@
 	EXC_XFER_EE_LITE(0x400, handle_page_fault)
 
 /* 0x0500 - External Interrupt Exception */
+#ifdef CONFIG_IPIPE
+        EXCEPTION(0x0500, HardwareInterrupt, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */ 
 	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
+#endif /* CONFIG_IPIPE */
+        
 /* 0x0600 - Alignment Exception */
 	START_EXCEPTION(0x0600, Alignment)
 	NORMAL_EXCEPTION_PROLOG
@@ -434,8 +444,12 @@
 	lis	r0,TSR_PIS@h
 	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_IPIPE
+        EXC_XFER_IPIPE(0x1000, __ipipe_grab_timer)
+#else /* !CONFIG_IPIPE */
 	EXC_XFER_LITE(0x1000, timer_interrupt)
-
+#endif /* CONFIG_IPIPE */
+        
 #if 0
 /* NOTE:
  * FIT and WDT handlers are not implemented yet.
arch/powerpc/kernel/head_8xx.S +16 -2
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/head_8xx.S linux-2.6.19.ipipe/arch/powerpc/kernel/head_8xx.S
@@ -187,6 +187,12 @@
 	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
 			  ret_from_except_full)
 
+#ifdef CONFIG_IPIPE
+#define EXC_XFER_IPIPE(n, hdlr)         \
+       EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+                         __ipipe_ret_from_except)
+#endif /* CONFIG_IPIPE */
+        
 #define EXC_XFER_LITE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
@@ -238,8 +244,12 @@
 	EXC_XFER_EE_LITE(0x400, handle_page_fault)
 
 /* External interrupt */
+#ifdef CONFIG_IPIPE
+        EXCEPTION(0x500, HardwareInterrupt, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
+#endif /* CONFIG_IPIPE */
+        
 /* Alignment exception */
 	. = 0x600
 Alignment:
@@ -259,8 +269,12 @@
 	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
 
 /* Decrementer */
+#ifdef CONFIG_IPIPE
+        EXCEPTION(0x900, Decrementer, __ipipe_grab_timer, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
-
+#endif /* CONFIG_IPIPE */
+        
 	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
 
arch/powerpc/kernel/head_booke.h +16 -0
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/head_booke.h linux-2.6.19.ipipe/arch/powerpc/kernel/head_booke.h
@@ -187,6 +187,12 @@
 	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
 			  ret_from_except_full)
 
+#ifdef CONFIG_IPIPE
+#define EXC_XFER_IPIPE(n, hdlr)         \
+       EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+                         __ipipe_ret_from_except)
+#endif /* CONFIG_IPIPE */
+
 #define EXC_XFER_LITE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
@@ -345,6 +351,15 @@
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_STD(0x0700, program_check_exception)
 
+#ifdef CONFIG_IPIPE
+#define DECREMENTER_EXCEPTION                                                \
+        START_EXCEPTION(Decrementer)                                          \
+        NORMAL_EXCEPTION_PROLOG;                                              \
+        lis     r0,TSR_DIS@h;           /* Setup the DEC interrupt mask */    \
+        mtspr   SPRN_TSR,r0;            /* Clear the DEC interrupt */         \
+        addi    r3,r1,STACK_FRAME_OVERHEAD;                                   \
+        EXC_XFER_IPIPE(0x0900, __ipipe_grab_timer)
+#else /* !CONFIG_IPIPE */
 #define DECREMENTER_EXCEPTION						      \
 	START_EXCEPTION(Decrementer)					      \
 	NORMAL_EXCEPTION_PROLOG;					      \
@@ -352,6 +367,7 @@
 	mtspr   SPRN_TSR,r0;		/* Clear the DEC interrupt */	      \
 	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_LITE(0x0900, timer_interrupt)
+#endif /* CONFIG_IPIPE */
 
 #define FP_UNAVAILABLE_EXCEPTION					      \
 	START_EXCEPTION(FloatingPointUnavailable)			      \
arch/powerpc/kernel/head_fsl_booke.S +5 -1
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/head_fsl_booke.S linux-2.6.19.ipipe/arch/powerpc/kernel/head_fsl_booke.S
@@ -526,8 +526,12 @@
 	INSTRUCTION_STORAGE_EXCEPTION
 
 	/* External Input Interrupt */
+#ifdef CONFIG_IPIPE
+        EXCEPTION(0x0500, ExternalInput, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
-
+#endif /* CONFIG_IPIPE */
+        
 	/* Alignment Interrupt */
 	ALIGNMENT_EXCEPTION
 
arch/powerpc/kernel/idle.c +9 -0
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/idle.c linux-2.6.19.ipipe/arch/powerpc/kernel/idle.c
@@ -51,6 +51,7 @@
 	while (1) {
 		while (!need_resched() && !cpu_should_die()) {
 			ppc64_runlatch_off();
+			ipipe_suspend_domain();
 
 			if (ppc_md.power_save) {
 				clear_thread_flag(TIF_POLLING_NRFLAG);
@@ -59,13 +60,21 @@
 				 * is ordered w.r.t. need_resched() test.
 				 */
 				smp_mb();
+#ifdef CONFIG_IPIPE
+				local_irq_disable_hw();
+#else /* !CONFIG_IPIPE */
 				local_irq_disable();
+#endif /* CONFIG_IPIPE */
 
 				/* check again after disabling irqs */
 				if (!need_resched() && !cpu_should_die())
 					ppc_md.power_save();
 
+#ifdef CONFIG_IPIPE
+				local_irq_enable_hw();
+#else /* !CONFIG_IPIPE */
 				local_irq_enable();
+#endif /* CONFIG_IPIPE */
 				set_thread_flag(TIF_POLLING_NRFLAG);
 
 			} else {
arch/powerpc/kernel/ipipe-core.c +263 -0

263 lines not on this page · raw message

arch/powerpc/kernel/ipipe-mcount.S +76 -0

76 lines not on this page · raw message

arch/powerpc/kernel/ipipe-root.c +490 -0

490 lines not on this page · raw message

arch/powerpc/kernel/irq.c +4 -0
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/irq.c linux-2.6.19.ipipe/arch/powerpc/kernel/irq.c
@@ -69,7 +69,11 @@
 #endif
 
 int __irq_offset_value;
+#ifdef CONFIG_IPIPE
+int ppc_spurious_interrupts;
+#else /* !CONFIG_IPIPE */
 static int ppc_spurious_interrupts;
+#endif /* CONFIG_IPIPE */
 
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(__irq_offset_value);
arch/powerpc/kernel/Makefile +2 -0
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/Makefile linux-2.6.19.ipipe/arch/powerpc/kernel/Makefile
@@ -57,6 +57,8 @@
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_IPIPE)             += ipipe-core.o ipipe-root.o
+obj-$(CONFIG_IPIPE_TRACE_MCOUNT)       += ipipe-mcount.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
 module-$(CONFIG_PPC64)		+= module_64.o
arch/powerpc/kernel/setup_32.c +1 -1
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/setup_32.c linux-2.6.19.ipipe/arch/powerpc/kernel/setup_32.c
@@ -88,7 +88,7 @@
  * from the address that it was linked at, so we must use RELOC/PTRRELOC
  * to access static data (including strings).  -- paulus
  */
-unsigned long __init early_init(unsigned long dt_ptr)
+notrace unsigned long __init early_init(unsigned long dt_ptr)
 {
 	unsigned long offset = reloc_offset();
 	struct cpu_spec *spec;
arch/powerpc/kernel/time.c +13 -2
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/time.c linux-2.6.19.ipipe/arch/powerpc/kernel/time.c
@@ -296,7 +296,11 @@
 
 #else /* ! CONFIG_VIRT_CPU_ACCOUNTING */
 #define calc_cputime_factors()
+#ifdef CONFIG_IPIPE
+#define account_process_time(regs)      update_process_times(user_mode(__ipipe_tick_regs + smp_processor_id()))
+#else
 #define account_process_time(regs)	update_process_times(user_mode(regs))
+#endif /* CONFIG_IPIPE */
 #define calculate_steal_time()		do { } while (0)
 #endif
 
@@ -669,10 +673,17 @@
 		}
 		write_sequnlock(&xtime_lock);
 	}
-	
+
+#ifdef CONFIG_IPIPE
+	if (__ipipe_decr_ticks == tb_ticks_per_jiffy) {
+		next_dec = tb_ticks_per_jiffy - ticks;
+		set_dec(next_dec);
+	}
+#else /* !CONFIG_IPIPE */
 	next_dec = tb_ticks_per_jiffy - ticks;
 	set_dec(next_dec);
-
+#endif /* CONFIG_IPIPE */
+        
 #ifdef CONFIG_PPC_ISERIES
 	if (hvlpevent_is_pending())
 		process_hvlpevents();
arch/powerpc/kernel/traps.c +38 -2
diff -Naur linux-2.6.19.orig/arch/powerpc/kernel/traps.c linux-2.6.19.ipipe/arch/powerpc/kernel/traps.c
@@ -324,6 +324,9 @@
 	int recover = 0;
 	unsigned long reason = get_mc_reason(regs);
 
+        if (ipipe_trap_notify(IPIPE_TRAP_MCE,regs))
+                return;
+        
 	/* See if any machine dependent calls */
 	if (ppc_md.machine_check_exception)
 		recover = ppc_md.machine_check_exception(regs);
@@ -490,6 +493,10 @@
 
 void unknown_exception(struct pt_regs *regs)
 {
+        if (ipipe_trap_notify(IPIPE_TRAP_IABR,regs))
+                return;
+        if (ipipe_trap_notify(IPIPE_TRAP_UNKNOWN,regs))
+                return;
 	printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
 	       regs->nip, regs->msr, regs->trap);
 
@@ -508,13 +515,17 @@
 
 void RunModeException(struct pt_regs *regs)
 {
+        if (ipipe_trap_notify(IPIPE_TRAP_RM,regs))
+                return;
 	_exception(SIGTRAP, regs, 0, 0);
 }
 
 void __kprobes single_step_exception(struct pt_regs *regs)
 {
 	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
-
+        if (ipipe_trap_notify(IPIPE_TRAP_SSTEP,regs))
+                return;
+ 
 	if (notify_die(DIE_SSTEP, "single_step", regs, 5,
 					5, SIGTRAP) == NOTIFY_STOP)
 		return;
@@ -534,7 +545,9 @@
 {
 	if (single_stepping(regs)) {
 		clear_single_step(regs);
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+                if (ipipe_trap_notify(IPIPE_TRAP_SSTEP,regs))
+                    return;
+                _exception(SIGTRAP, regs, TRAP_TRACE, 0);
 	}
 }
 
@@ -786,6 +799,9 @@
 	unsigned int reason = get_reason(regs);
 	extern int do_mathemu(struct pt_regs *regs);
 
+        if (ipipe_trap_notify(IPIPE_TRAP_PCE,regs))
+                return;
+        
 #ifdef CONFIG_MATH_EMULATION
 	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
 	 * but there seems to be a hardware bug on the 405GP (RevD)
@@ -855,6 +871,9 @@
 		return;
 	}
 
+        if (ipipe_trap_notify(IPIPE_TRAP_ALIGNMENT,regs))
+                return;
+        
 	/* Operand address was bad */
 	if (fixed == -EFAULT) {
 		sig = SIGSEGV;
@@ -880,6 +899,8 @@
 
 void nonrecoverable_exception(struct pt_regs *regs)
 {
+        if (ipipe_trap_notify(IPIPE_TRAP_NREC,regs))
+                return;
 	printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n",
 	       regs->nip, regs->msr);
 	debugger(regs);
@@ -902,6 +923,9 @@
 
 void altivec_unavailable_exception(struct pt_regs *regs)
 {
+  	if (ipipe_trap_notify(IPIPE_TRAP_ALTUNAVAIL,regs))
+	    	return;
+
 	if (user_mode(regs)) {
 		/* A user program has executed an altivec instruction,
 		   but this kernel doesn't support altivec. */
@@ -926,6 +950,9 @@
 	extern int Soft_emulate_8xx(struct pt_regs *);
 	int errcode;
 
+        if (ipipe_trap_notify(IPIPE_TRAP_SOFTEMU,regs))
+                return;
+        
 	CHECK_FULL_REGS(regs);
 
 	if (!user_mode(regs)) {
@@ -954,6 +981,9 @@
 
 void DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
+        if (ipipe_trap_notify(IPIPE_TRAP_DEBUG,regs))
+                return;
+
 	if (debug_status & DBSR_IC) {	/* instruction completion */
 		regs->msr &= ~MSR_DE;
 		if (user_mode(regs)) {
@@ -984,6 +1014,9 @@
 {
 	int err;
 
+        if (ipipe_trap_notify(IPIPE_TRAP_ALTASSIST,regs))
+	    	return;
+
 	if (!user_mode(regs)) {
 		printk(KERN_EMERG "VMX/Altivec assist exception in kernel mode"
 		       " at %lx\n", regs->nip);
@@ -1034,6 +1067,9 @@
 	int fpexc_mode;
 	int code = 0;
 
+        if (ipipe_trap_notify(IPIPE_TRAP_SPE,regs))
+	    	return;
+
 	spefscr = current->thread.spefscr;
 	fpexc_mode = current->thread.fpexc_mode;
 
arch/powerpc/mm/fault.c +3 -0
diff -Naur linux-2.6.19.orig/arch/powerpc/mm/fault.c linux-2.6.19.ipipe/arch/powerpc/mm/fault.c
@@ -175,6 +175,9 @@
 	is_write = error_code & ESR_DST;
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
 
+        if (ipipe_trap_notify(IPIPE_TRAP_ACCESS,regs))
+	    	return 0;
+        
 	if (notify_page_fault(DIE_PAGE_FAULT, "page_fault", regs, error_code,
 				11, SIGSEGV) == NOTIFY_STOP)
 		return 0;
arch/ppc/boot/Makefile +8 -0
diff -Naur linux-2.6.19.orig/arch/ppc/boot/Makefile linux-2.6.19.ipipe/arch/ppc/boot/Makefile
@@ -16,6 +16,14 @@
 CFLAGS	 	+= -fno-builtin -D__BOOTER__ -Iarch/$(ARCH)/boot/include
 HOSTCFLAGS	+= -Iarch/$(ARCH)/boot/include
 
+ifdef CONFIG_IPIPE_TRACE
+# do not trace the boot loader
+nullstring :=
+space      := $(nullstring) # end of the line
+pg_flag     = $(nullstring) -pg # end of the line
+CFLAGS     := $(subst ${pg_flag},${space},${CFLAGS})
+endif
+
 BOOT_TARGETS	= zImage zImage.initrd znetboot znetboot.initrd
 
 bootdir-y			:= simple
arch/ppc/Kconfig +2 -0
diff -Naur linux-2.6.19.orig/arch/ppc/Kconfig linux-2.6.19.ipipe/arch/ppc/Kconfig
@@ -950,6 +950,8 @@
 	depends on SMP
 	default "4"
 
+source "kernel/ipipe/Kconfig"
+
 config HIGHMEM
 	bool "High memory support"
 
arch/ppc/kernel/entry.S +92 -0

137 lines not on this page · raw message

arch/ppc/kernel/head_44x.S +5 -1
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/head_44x.S linux-2.6.19.ipipe/arch/ppc/kernel/head_44x.S
@@ -427,7 +427,11 @@
 	INSTRUCTION_STORAGE_EXCEPTION
 
 	/* External Input Interrupt */
-	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+#ifdef CONFIG_IPIPE
+	EXCEPTION(0x0500, ExternalInput, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
+ 	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+#endif /* CONFIG_IPIPE */
 
 	/* Alignment Interrupt */
 	ALIGNMENT_EXCEPTION
arch/ppc/kernel/head_4xx.S +14 -0
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/head_4xx.S linux-2.6.19.ipipe/arch/ppc/kernel/head_4xx.S
@@ -228,6 +228,12 @@
 	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
 			  ret_from_except_full)
 
+#ifdef CONFIG_IPIPE
+#define EXC_XFER_IPIPE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+			  __ipipe_ret_from_except)
+#endif /* CONFIG_IPIPE */
+
 #define EXC_XFER_LITE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
@@ -396,7 +402,11 @@
 	EXC_XFER_EE_LITE(0x400, handle_page_fault)
 
 /* 0x0500 - External Interrupt Exception */
+#ifdef CONFIG_IPIPE
+	EXCEPTION(0x0500, HardwareInterrupt, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+#endif /* CONFIG_IPIPE */
 
 /* 0x0600 - Alignment Exception */
 	START_EXCEPTION(0x0600, Alignment)
@@ -434,7 +444,11 @@
 	lis	r0,TSR_PIS@h
 	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_IPIPE
+	EXC_XFER_IPIPE(0x1000, __ipipe_grab_timer)
+#else /* !CONFIG_IPIPE */
 	EXC_XFER_LITE(0x1000, timer_interrupt)
+#endif /* CONFIG_IPIPE */
 
 #if 0
 /* NOTE:
arch/ppc/kernel/head_8xx.S +13 -0
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/head_8xx.S linux-2.6.19.ipipe/arch/ppc/kernel/head_8xx.S
@@ -186,6 +186,11 @@
 #define EXC_XFER_STD(n, hdlr)		\
 	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
 			  ret_from_except_full)
+#ifdef CONFIG_IPIPE
+#define EXC_XFER_IPIPE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+			  __ipipe_ret_from_except)
+#endif /* CONFIG_IPIPE */
 
 #define EXC_XFER_LITE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
@@ -238,7 +243,11 @@
 	EXC_XFER_EE_LITE(0x400, handle_page_fault)
 
 /* External interrupt */
+#ifdef CONFIG_IPIPE
+	EXCEPTION(0x500, HardwareInterrupt, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+#endif /* CONFIG_IPIPE */
 
 /* Alignment exception */
 	. = 0x600
@@ -259,7 +268,11 @@
 	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
 
 /* Decrementer */
+#ifdef CONFIG_IPIPE
+	EXCEPTION(0x900, Decrementer, __ipipe_grab_timer, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+#endif /* CONFIG_IPIPE */
 
 	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
arch/ppc/kernel/head_booke.h +16 -0
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/head_booke.h linux-2.6.19.ipipe/arch/ppc/kernel/head_booke.h
@@ -187,6 +187,12 @@
 	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
 			  ret_from_except_full)
 
+#ifdef CONFIG_IPIPE
+#define EXC_XFER_IPIPE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+			  __ipipe_ret_from_except)
+#endif /* CONFIG_IPIPE */
+
 #define EXC_XFER_LITE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
@@ -345,6 +351,15 @@
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_STD(0x0700, program_check_exception)
 
+#ifdef CONFIG_IPIPE
+#define DECREMENTER_EXCEPTION						      \
+	START_EXCEPTION(Decrementer)					      \
+	NORMAL_EXCEPTION_PROLOG;					      \
+	lis     r0,TSR_DIS@h;           /* Setup the DEC interrupt mask */    \
+	mtspr   SPRN_TSR,r0;		/* Clear the DEC interrupt */	      \
+	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
+	EXC_XFER_IPIPE(0x0900, __ipipe_grab_timer)
+#else /* !CONFIG_IPIPE */
 #define DECREMENTER_EXCEPTION						      \
 	START_EXCEPTION(Decrementer)					      \
 	NORMAL_EXCEPTION_PROLOG;					      \
@@ -352,6 +367,7 @@
 	mtspr   SPRN_TSR,r0;		/* Clear the DEC interrupt */	      \
 	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_LITE(0x0900, timer_interrupt)
+#endif /* CONFIG_IPIPE */
 
 #define FP_UNAVAILABLE_EXCEPTION					      \
 	START_EXCEPTION(FloatingPointUnavailable)			      \
arch/ppc/kernel/head_fsl_booke.S +4 -0
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/head_fsl_booke.S linux-2.6.19.ipipe/arch/ppc/kernel/head_fsl_booke.S
@@ -526,7 +526,11 @@
 	INSTRUCTION_STORAGE_EXCEPTION
 
 	/* External Input Interrupt */
+#ifdef CONFIG_IPIPE
+	EXCEPTION(0x0500, ExternalInput, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+#endif /* CONFIG_IPIPE */
 
 	/* Alignment Interrupt */
 	ALIGNMENT_EXCEPTION
arch/ppc/kernel/head.S +14 -0
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/head.S linux-2.6.19.ipipe/arch/ppc/kernel/head.S
@@ -295,6 +295,12 @@
 	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
 			  ret_from_except_full)
 
+#ifdef CONFIG_IPIPE
+#define EXC_XFER_IPIPE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+			  __ipipe_ret_from_except)
+#endif /* CONFIG_IPIPE */
+
 #define EXC_XFER_LITE(n, hdlr)		\
 	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
 			  ret_from_except)
@@ -356,7 +362,11 @@
 	EXC_XFER_EE_LITE(0x400, handle_page_fault)
 
 /* External interrupt */
+#ifdef CONFIG_IPIPE
+	EXCEPTION(0x500, HardwareInterrupt, __ipipe_grab_irq, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+#endif /* CONFIG_IPIPE */
 
 /* Alignment exception */
 	. = 0x600
@@ -381,7 +391,11 @@
 	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
 /* Decrementer */
+#ifdef CONFIG_IPIPE
+	EXCEPTION(0x900, Decrementer, __ipipe_grab_timer, EXC_XFER_IPIPE)
+#else /* !CONFIG_IPIPE */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+#endif /* CONFIG_IPIPE */
 
 	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
arch/ppc/kernel/ipipe-core.c +264 -0

264 lines not on this page · raw message

arch/ppc/kernel/ipipe-mcount.S +76 -0

76 lines not on this page · raw message

arch/ppc/kernel/ipipe-root.c +488 -0

488 lines not on this page · raw message

arch/ppc/kernel/Makefile +2 -0
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/Makefile linux-2.6.19.ipipe/arch/ppc/kernel/Makefile
@@ -17,6 +17,8 @@
 obj-$(CONFIG_RAPIDIO)		+= rio.o
 obj-$(CONFIG_KGDB)		+= ppc-stub.o
 obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
+obj-$(CONFIG_IPIPE)		+= ipipe-core.o ipipe-root.o
+obj-$(CONFIG_IPIPE_TRACE_MCOUNT)	+= ipipe-mcount.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 
 ifndef CONFIG_MATH_EMULATION
arch/ppc/kernel/setup.c +1 -1
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/setup.c linux-2.6.19.ipipe/arch/ppc/kernel/setup.c
@@ -295,7 +295,7 @@
  * to access static data (including strings).  -- paulus
  */
 __init
-unsigned long
+notrace unsigned long
 early_init(int r3, int r4, int r5)
 {
  	unsigned long phys;
arch/ppc/kernel/time.c +4 -0
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/time.c linux-2.6.19.ipipe/arch/ppc/kernel/time.c
@@ -146,7 +146,11 @@
 		jiffy_stamp += tb_ticks_per_jiffy;
 		
 		profile_tick(CPU_PROFILING);
+#ifdef CONFIG_IPIPE
+		update_process_times(user_mode(__ipipe_tick_regs + smp_processor_id()));
+#else
 		update_process_times(user_mode(regs));
+#endif
 
 	  	if (smp_processor_id())
 			continue;
arch/ppc/kernel/traps.c +33 -0
diff -Naur linux-2.6.19.orig/arch/ppc/kernel/traps.c linux-2.6.19.ipipe/arch/ppc/kernel/traps.c
@@ -233,6 +233,9 @@
 {
 	unsigned long reason = get_mc_reason(regs);
 
+	if (ipipe_trap_notify(IPIPE_TRAP_MCE,regs))
+	    	return;
+
 	if (user_mode(regs)) {
 		regs->msr |= MSR_RI;
 		_exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
@@ -392,6 +395,8 @@
 
 void unknown_exception(struct pt_regs *regs)
 {
+	if (ipipe_trap_notify(IPIPE_TRAP_UNKNOWN,regs))
+	    	return;
 	printk("Bad trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
 	       regs->nip, regs->msr, regs->trap, print_tainted());
 	_exception(SIGTRAP, regs, 0, 0);
@@ -399,6 +404,8 @@
 
 void instruction_breakpoint_exception(struct pt_regs *regs)
 {
+	if (ipipe_trap_notify(IPIPE_TRAP_IABR,regs))
+	    	return;
 	if (debugger_iabr_match(regs))
 		return;
 	_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
@@ -406,6 +413,8 @@
 
 void RunModeException(struct pt_regs *regs)
 {
+	if (ipipe_trap_notify(IPIPE_TRAP_RM,regs))
+	    	return;
 	_exception(SIGTRAP, regs, 0, 0);
 }
 
@@ -555,6 +564,8 @@
 {
 	if (single_stepping(regs)) {
 		clear_single_step(regs);
+		if (ipipe_trap_notify(IPIPE_TRAP_SSTEP,regs))
+		    return;
 		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
 	}
 }
@@ -624,6 +635,9 @@
 	unsigned int reason = get_reason(regs);
 	extern int do_mathemu(struct pt_regs *regs);
 
+	if (ipipe_trap_notify(IPIPE_TRAP_PCE,regs))
+	    	return;
+
 #ifdef CONFIG_MATH_EMULATION
 	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
 	 * but there seems to be a hardware bug on the 405GP (RevD)
@@ -701,6 +715,8 @@
 void single_step_exception(struct pt_regs *regs)
 {
 	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
+	if (ipipe_trap_notify(IPIPE_TRAP_SSTEP,regs))
+	    	return;
 	if (debugger_sstep(regs))
 		return;
 	_exception(SIGTRAP, regs, TRAP_TRACE, 0);
@@ -716,6 +732,8 @@
 		emulate_single_step(regs);
 		return;
 	}
+	if (ipipe_trap_notify(IPIPE_TRAP_ALIGNMENT,regs))
+	    	return;
 	if (fixed == -EFAULT) {
 		sig = SIGSEGV;
 		code = SEGV_ACCERR;
@@ -740,6 +758,8 @@
 
 void nonrecoverable_exception(struct pt_regs *regs)
 {
+	if (ipipe_trap_notify(IPIPE_TRAP_NREC,regs))
+	    	return;
 	printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n",
 	       regs->nip, regs->msr);
 	debugger(regs);
@@ -760,6 +780,9 @@
 	extern int Soft_emulate_8xx(struct pt_regs *);
 	int errcode;
 
+	if (ipipe_trap_notify(IPIPE_TRAP_SOFTEMU,regs))
+	    	return;
+
 	CHECK_FULL_REGS(regs);
 
 	if (!user_mode(regs)) {
@@ -788,6 +811,8 @@
 
 void DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
+	if (ipipe_trap_notify(IPIPE_TRAP_DEBUG,regs))
+	    	return;
 	if (debug_status & DBSR_IC) {	/* instruction completion */
 		regs->msr &= ~MSR_DE;
 		if (user_mode(regs)) {
@@ -828,6 +853,9 @@
 {
 	static int kernel_altivec_count;
 
+	if (ipipe_trap_notify(IPIPE_TRAP_ALTUNAVAIL,regs))
+	    	return;
+
 #ifndef CONFIG_ALTIVEC
 	if (user_mode(regs)) {
 		/* A user program has executed an altivec instruction,
@@ -849,6 +877,8 @@
 {
 	int err;
 
+	if (ipipe_trap_notify(IPIPE_TRAP_ALTASSIST,regs))
+	    	return;
 	preempt_disable();
 	if (regs->msr & MSR_VEC)
 		giveup_altivec(current);
@@ -909,6 +939,9 @@
 	int fpexc_mode;
 	int code = 0;
 
+	if (ipipe_trap_notify(IPIPE_TRAP_SPE,regs))
+	    	return;
+
 	spefscr = current->thread.spefscr;
 	fpexc_mode = current->thread.fpexc_mode;
 
arch/ppc/mm/fault.c +3 -0
diff -Naur linux-2.6.19.orig/arch/ppc/mm/fault.c linux-2.6.19.ipipe/arch/ppc/mm/fault.c
@@ -113,6 +113,9 @@
 		is_write = error_code & 0x02000000;
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
 
+	if (ipipe_trap_notify(IPIPE_TRAP_ACCESS,regs))
+	    	return 0;
+
 #if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
 	if (debugger_fault_handler && TRAP(regs) == 0x300) {
 		debugger_fault_handler(regs);
arch/ppc/platforms/85xx/sbc85xx.h +0 -1
diff -Naur linux-2.6.19.orig/arch/ppc/platforms/85xx/sbc85xx.h linux-2.6.19.ipipe/arch/ppc/platforms/85xx/sbc85xx.h
@@ -15,7 +15,6 @@
 #define __PLATFORMS_85XX_SBC85XX_H__
 
 #include <linux/init.h>
-#include <linux/seq_file.h>
 #include <asm/ppcboot.h>
 
 #define BOARD_CCSRBAR		((uint)0xff700000)
arch/ppc/syslib/open_pic.c +2 -2
diff -Naur linux-2.6.19.orig/arch/ppc/syslib/open_pic.c linux-2.6.19.ipipe/arch/ppc/syslib/open_pic.c
@@ -821,7 +821,7 @@
  */
 static void openpic_ack_irq(unsigned int irq_nr)
 {
-#ifdef __SLOW_VERSION__
+#if defined(__SLOW_VERSION__) || defined(CONFIG_IPIPE)
 	openpic_disable_irq(irq_nr);
 	openpic_eoi();
 #else
@@ -832,7 +832,7 @@
 
 static void openpic_end_irq(unsigned int irq_nr)
 {
-#ifdef __SLOW_VERSION__
+#if defined(__SLOW_VERSION__) || defined(CONFIG_IPIPE)
 	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
 	    && irq_desc[irq_nr].action)
 		openpic_enable_irq(irq_nr);
include/asm-powerpc/hw_irq.h +162 -0

174 lines not on this page · raw message

include/asm-powerpc/ipipe.h +216 -0

144 lines not on this page · raw message

include/asm-powerpc/irq.h +2 -0
diff -Naur linux-2.6.19.orig/include/asm-powerpc/irq.h linux-2.6.19.ipipe/include/asm-powerpc/irq.h

Lines of this file are not shown. View the raw message.

include/asm-ppc/ipipe.h +220 -0

220 lines not on this page · raw message

include/asm-ppc/mmu_context.h +11 -1
diff -Naur linux-2.6.19.orig/include/asm-ppc/mmu_context.h linux-2.6.19.ipipe/include/asm-ppc/mmu_context.h

Lines of this file are not shown. View the raw message.

include/asm-ppc/mv64x60.h +6 -6
diff -Naur linux-2.6.19.orig/include/asm-ppc/mv64x60.h linux-2.6.19.ipipe/include/asm-ppc/mv64x60.h

Lines of this file are not shown. View the raw message.

include/asm-ppc/pgalloc.h +5 -0
diff -Naur linux-2.6.19.orig/include/asm-ppc/pgalloc.h linux-2.6.19.ipipe/include/asm-ppc/pgalloc.h

Lines of this file are not shown. View the raw message.

include/linux/hardirq.h +13 -0
diff -Naur linux-2.6.19.orig/include/linux/hardirq.h linux-2.6.19.ipipe/include/linux/hardirq.h

Lines of this file are not shown. View the raw message.

include/linux/ipipe.h +769 -0

769 lines not on this page · raw message

include/linux/ipipe_trace.h +40 -0
diff -Naur linux-2.6.19.orig/include/linux/ipipe_trace.h linux-2.6.19.ipipe/include/linux/ipipe_trace.h

Lines of this file are not shown. View the raw message.

include/linux/linkage.h +4 -0
diff -Naur linux-2.6.19.orig/include/linux/linkage.h linux-2.6.19.ipipe/include/linux/linkage.h

Lines of this file are not shown. View the raw message.

include/linux/preempt.h +21 -6
diff -Naur linux-2.6.19.orig/include/linux/preempt.h linux-2.6.19.ipipe/include/linux/preempt.h

Lines of this file are not shown. View the raw message.

include/linux/radix-tree.h +2 -0
diff -Naur linux-2.6.19.orig/include/linux/radix-tree.h linux-2.6.19.ipipe/include/linux/radix-tree.h

Lines of this file are not shown. View the raw message.

include/linux/sched.h +17 -0
diff -Naur linux-2.6.19.orig/include/linux/sched.h linux-2.6.19.ipipe/include/linux/sched.h

Lines of this file are not shown. View the raw message.

init/Kconfig +2 -0
diff -Naur linux-2.6.19.orig/init/Kconfig linux-2.6.19.ipipe/init/Kconfig

Lines of this file are not shown. View the raw message.

init/main.c +6 -0
diff -Naur linux-2.6.19.orig/init/main.c linux-2.6.19.ipipe/init/main.c

Lines of this file are not shown. View the raw message.

kernel/exit.c +1 -0
diff -Naur linux-2.6.19.orig/kernel/exit.c linux-2.6.19.ipipe/kernel/exit.c

Lines of this file are not shown. View the raw message.

kernel/fork.c +11 -1
diff -Naur linux-2.6.19.orig/kernel/fork.c linux-2.6.19.ipipe/kernel/fork.c

Lines of this file are not shown. View the raw message.

kernel/ipipe/core.c +1049 -0

1,049 lines not on this page · raw message

kernel/ipipe/generic.c +424 -0

424 lines not on this page · raw message

kernel/ipipe/Kconfig +6 -0
diff -Naur linux-2.6.19.orig/kernel/ipipe/Kconfig linux-2.6.19.ipipe/kernel/ipipe/Kconfig

Lines of this file are not shown. View the raw message.

kernel/ipipe/Kconfig.debug +69 -0

69 lines not on this page · raw message

kernel/ipipe/Makefile +3 -0
diff -Naur linux-2.6.19.orig/kernel/ipipe/Makefile linux-2.6.19.ipipe/kernel/ipipe/Makefile

Lines of this file are not shown. View the raw message.

kernel/ipipe/tracer.c +1245 -0

1,245 lines not on this page · raw message

kernel/irq/handle.c +5 -0
diff -Naur linux-2.6.19.orig/kernel/irq/handle.c linux-2.6.19.ipipe/kernel/irq/handle.c

Lines of this file are not shown. View the raw message.

kernel/Makefile +1 -0
diff -Naur linux-2.6.19.orig/kernel/Makefile linux-2.6.19.ipipe/kernel/Makefile

Lines of this file are not shown. View the raw message.

kernel/printk.c +73 -0

73 lines not on this page · raw message

kernel/sched.c +69 -3

72 lines not on this page · raw message

kernel/signal.c +1 -0
diff -Naur linux-2.6.19.orig/kernel/signal.c linux-2.6.19.ipipe/kernel/signal.c

Lines of this file are not shown. View the raw message.

lib/Kconfig.debug +2 -0
diff -Naur linux-2.6.19.orig/lib/Kconfig.debug linux-2.6.19.ipipe/lib/Kconfig.debug

Lines of this file are not shown. View the raw message.

lib/smp_processor_id.c +5 -0
diff -Naur linux-2.6.19.orig/lib/smp_processor_id.c linux-2.6.19.ipipe/lib/smp_processor_id.c

Lines of this file are not shown. View the raw message.

Makefile +4 -0
diff -Naur linux-2.6.19.orig/Makefile linux-2.6.19.ipipe/Makefile

Lines of this file are not shown. View the raw message.

mm/vmalloc.c +5 -0
diff -Naur linux-2.6.19.orig/mm/vmalloc.c linux-2.6.19.ipipe/mm/vmalloc.c

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

#4 lore raw
Quoted 29 lines · Benjamin Zores
Quoted 1 line · On Mon, 18 Dec 2006 14:06:15 +0100 Wolfgang Grandegger <[email protected]> wrote:

I don't understand your questions. These patches are for the PPC tree. The POWERPC is still not supported. Do you already have a working port for the PowerPC tree 2.6.18?

I send one a month ago but which wasn't 100% complete.
Now, here's an updated one for both ppc and powerpc arch.
It based on your patch + the equivalent functions ported to merged powerpc architecture. This time it should compile fine but i haven't tested if ppc arch still works (i can't do so).

I just remove the xenomai parts from your patch (which obviously had nothing to do in adeos patch itself).

With ipipe enabled on my card, the kernels boots up
but still hangs due to IRQ problems has it used to do in 2.6.18.
It seems to hang at SATA driver load (does the same for USB/I2C and so on after all)
but if I had printk() in each function from ipipe-root.c it goes in an endless
loop of:

...
__ipipe_handle_irq:226
__ipipe_do_timer:404
__ipipe_grab_timer:357
__ipipe_handle_irq:226
__ipipe_do_timer:404
__ipipe_grab_timer:357
...

Quoted 1 line

and seems to never go further :-(

Well, in the meantime I started the porting of IPIPE v1.6 over the PowerPC tree on my Icecube-MPC5200 board ... and it seems to hang at the same location :-(.

Quoted 1 line

Do you have an idea where and why this might come from ?

No yet but it seems not to be related with interrupts.

Quoted 2 lines

FYI, the vanilla 2.6.19 kernel boots up my card fine and goes to userspace but seems to also hang a few time later (but at least it boots up to user space).

The PowerPC tree is highly experimental, ... not really a good setup to do the porting.

Quoted 1 line

Anyhow, please consider this patch for review and if possible test it/apply it.

OK, I will have a closer look when time permits.

Wolfgang.