Add -boot n option for x86 using PXE
PATCH 1/1 Add -boot n option for x86 using PXE
Howdy,
The following patch enables -boot n for x86 using etherboot PXE ROMs. It depends on my previous -option-rom patch.
Essentially, if -boot n is specified, the set of NICs is searched and the patch looks for a ROM named pxe-<model>.bin in the BIOS path. When one is found, it is added as an option rom.
Besides applying this patch, three ROMs will have to be added to pc-bios/. I'd suggest getting them from http://www.rom-o-matic.net. You'll need ROMs for:
pcnet32:pcnet32 -- [0x1022,0x2000]
ns8390:winbond940 -- [0x1050,0x0940]
rtl8139:rtl8139 -- [0x10ec,0x8139]
And they should be named:
pxe-pcnet.bin
pxe-ne2k_pci.bin
pxe-rtl8139.bin
Right now, I have it limited to TARGET_I386 as I'm not sure whether other platforms support PXE booting. I also think this is a little hacky so if anyone has a better suggestion I'd appreciate hearing it.
Regards,
Anthony Liguori
Makefile +2 -1
@@ -79,7 +79,8 @@ install: all $(if $(BUILD_DOCS),install- $(INSTALL) -m 755 -s $(TOOLS) "$(DESTDIR)$(bindir)" mkdir -p "$(DESTDIR)$(datadir)" for x in bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \ - video.x openbios-sparc32 linux_boot.bin; do \ + video.x openbios-sparc32 linux_boot.bin pxe-ne2k_pci.bin \ + pxe-rtl8139.bin pxe-pcnet.bin; do \ $(INSTALL) -m 644 $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \ done ifndef CONFIG_WIN32
pc-bios/README +6 -0
@@ -14,3 +14,9 @@ - OpenBIOS (http://www.openbios.org/) is a free (GPL v2) portable firmware implementation. The goal is to implement a 100% IEEE 1275-1994 (referred to as Open Firmware) compliant firmware. + +- The PXE roms come from Rom-o-Matic etherboot 5.4.2. + pcnet32:pcnet32 -- [0x1022,0x2000] + ns8390:winbond940 -- [0x1050,0x0940] + rtl8139:rtl8139 -- [0x10ec,0x8139] + http://rom-o-matic.net/
qemu-doc.texi +3 -3
@@ -219,9 +219,9 @@ Use @var{file} as CD-ROM image (you cann @option{-cdrom} at the same time). You can use the host CD-ROM by using @file{/dev/cdrom} as filename (@pxref{host_drives}). -@item -boot [a|c|d] -Boot on floppy (a), hard disk (c) or CD-ROM (d). Hard disk boot is -the default. +@item -boot [a|c|d|n] +Boot on floppy (a), hard disk (c), CD-ROM (d), or Etherboot (n). Hard disk boot +is the default. @item -disk ide,img=file[,hdx=a..dd][,type=disk|cdrom] Use @var{file} as the IDE disk/CD-ROM image. The defaults are: hdx=a,type=disk
vl.c +24 -2
@@ -6111,7 +6111,7 @@ void help(void)"-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n" "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n" "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n" -"-boot [a|c|d] boot on floppy (a), hard disk (c) or CD-ROM (d)\n" +"-boot [a|c|d|n] boot on floppy (a), hard disk (c), CD-ROM (d), or network (n)\n" "-disk ide,img=file[,hdx=a..dd][,type=disk|cdrom] \n" " defaults are: hdx=a,type=disk \n" "-disk scsi,img=file[,sdx=a..g][,type=disk|cdrom][,id=n] \n"
@@ -6910,7 +6910,7 @@ int main(int argc, char **argv)case QEMU_OPTION_boot: boot_device = optarg[0 ]; if (boot_device != 'a' && -#ifdef TARGET_SPARC +#if defined(TARGET_SPARC ) || defined(TARGET_I386 )// Network boot boot_device != 'n' &&#endif
@@ -7231,6 +7231,28 @@ int main(int argc, char **argv)exit (1 ); } +#ifdef TARGET_I386 +if (boot_device =='n' ) { +for (i =0 ; i < nb_nics; i++) { +const char *model = nd_table[i].model; +char buf[1024 ]; +if (model ==NULL ) + model ="ne2k_pci" ; +snprintf (buf,sizeof (buf),"%s/pxe-%s.bin" , bios_dir, model); +if (get_image_size (buf) >0 ) { + option_rom[nb_option_roms] =strdup (buf); + nb_option_roms++; +break ; + } + } +if (i == nb_nics) { +fprintf (stderr,"No valid PXE rom found for network device\n" ); +exit (1 ); + } + boot_device ='c' ;/* to prevent confusion by the BIOS */ + } +#endif +/* init the memory */ phys_ram_size = ram_size + vga_ram_size + bios_size;