Skip to contentSkip to conversation

Help with ACPI events

DISCUSSION Larry Finger 2 participants 3 messages Dec 29, 2006 – Dec 30, 2006 ACPI

lore
Share & tools
lore
#0 lore raw

I'm writing for some help with ACPI events, which may be getting in the way of the setting of LEDs for the bcm43xx module. I have an HP notebook with a "Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card". This machine has a wireless on/off switch on the front. By experimenting while using 2.6.9.1, I found the necessary code needed to toggle the LED associated with the switch. The same code does not work with 2.6.20-rc2 and the LED is always off. The state of the switch is correctly read out by my code, but no deal with changing the LED state.

The reason I'm writing you is that whenever the switch is changed on 2.6.20, a "ACPI: EC: evaluating _Q10" message is logged just before my code detects the switch change. I looked at the acpi driver a little, but quickly got lost.

Is there a change in the acpi subsystem in 2.6.20 that might be interfering? Where should I look next?

Thanks,

Larry

#1 lore raw

Next, you should look into your DSDT and find what exactly _Q10 does (it might set/reset some variable with descriptive name). Then, in your code you can read the state of this variable with acpi_evaluate_integer/acpi_evaluate_object. Please look at drivers in drivers/acpi for examples.

Regards,
Alex.

Quoted 21 lines · Larry Finger

I'm writing for some help with ACPI events, which may be getting in the way of the setting of LEDs for the bcm43xx module. I have an HP notebook with a "Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card". This machine has a wireless on/off switch on the front. By experimenting while using 2.6.9.1, I found the necessary code needed to toggle the LED associated with the switch. The same code does not work with 2.6.20-rc2 and the LED is always off. The state of the switch is correctly read out by my code, but no deal with changing the LED state.

The reason I'm writing you is that whenever the switch is changed on 2.6.20, a "ACPI: EC: evaluating _Q10" message is logged just before my code detects the switch change. I looked at the acpi driver a little, but quickly got lost.

Is there a change in the acpi subsystem in 2.6.20 that might be interfering? Where should I look next?

Thanks,

Larry
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
Quoted 5 lines · Alexey Starikovskiy

Next, you should look into your DSDT and find what exactly _Q10 does (it might set/reset some variable with descriptive name). Then, in your code you can read the state of this variable with acpi_evaluate_integer/acpi_evaluate_object. Please look at drivers in drivers/acpi for examples.

Thanks for the quick response. Fortunately, I didn't need to deal with the problem. Apparently, some part of my git tree had gotten corrupted. When I downloaded a fresh copy, this problem went away.

Larry