Skip to contentSkip to conversation

S.M.A.R.T no longer available in 2.6.20-rc2-mm2 with libata

DISCUSSION Ed Sweetman 4 participants 7 messages Jan 4, 2007 – Jan 5, 2007

lore
Share & tools
lore
#0 lore raw

Not sure what went on between 2.6.19-rc5-mm2 and 2.6.20-rc2-mm2 in libata land but SMART is no longer available on my hdds. I'm assuming this is not the intended behavior.

In case this is chipset specific, IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)

I'm using Libata nvidia driver, the drives happen to be sata drives, but even the pata ones no longer report having SMART.

#1 lore raw
Quoted 9 lines · Ed Sweetman

Not sure what went on between 2.6.19-rc5-mm2 and 2.6.20-rc2-mm2 in
libata land but SMART is no longer available on my hdds. I'm assuming
this is not the intended behavior.

In case this is chipset specific, IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)

I'm using Libata nvidia driver, the drives happen to be sata drives, but even the pata ones no longer report having SMART.

What program are you trying to use here? As I reported around -rc1 time, hddtemp is broken by 2.6.20-rc but Jens posted a patch to fix it.

Signature · 5 lines
Cheers,
Alistair.

Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
#4 lore raw
In reply to Ed Sweetman
Quoted 1 line · Ed Sweetman

Not sure what went on between 2.6.19-rc5-mm2 and 2.6.20-rc2-mm2 in libata land but SMART is no longer available on my hdds.

It's working for me with 2.6.20-rc3, ata_piix libata driver.

-ml

#5 lore raw
Quoted 7 lines · Mark Lord
Quoted 1 line · Ed Sweetman

Not sure what went on between 2.6.19-rc5-mm2 and 2.6.20-rc2-mm2 in libata land but SMART is no longer available on my hdds.

It's working for me with 2.6.20-rc3, ata_piix libata driver.

-ml

Well, not in the sata_nv libata driver. The only change I make is the kernel (config is basically the same and nothing in the bios or hardware is altered).

#2 lore raw
In reply to Alistair John Strachan
Quoted 6 lines · Alistair John Strachan
Quoted 4 lines · Ed Sweetman

Not sure what went on between 2.6.19-rc5-mm2 and 2.6.20-rc2-mm2 in
libata land but SMART is no longer available on my hdds. I'm assuming
this is not the intended behavior.

Quoted 10 lines
Quoted 6 lines

In case this is chipset specific, IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)

I'm using Libata nvidia driver, the drives happen to be sata drives, but even the pata ones no longer report having SMART.

What program are you trying to use here? As I reported around -rc1 time, hddtemp is broken by 2.6.20-rc but Jens posted a patch to fix it.

I must have missed that blurb. hddtemp is indeed the program I was looking at. And it does seem that it is the only one broken. Just re-installed the other smartctl tools and they do work. Thanks.

#3 lore raw
Quoted 9 lines · Ed Sweetman
Quoted 8 lines · Alistair John Strachan
Quoted 7 lines · Ed Sweetman

Not sure what went on between 2.6.19-rc5-mm2 and 2.6.20-rc2-mm2 in
libata land but SMART is no longer available on my hdds. I'm
assuming this is not the intended behavior.

In case this is chipset specific, IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)

Quoted 7 lines
Quoted 6 lines
Quoted 2 lines

I'm using Libata nvidia driver, the drives happen to be sata drives, but even the pata ones no longer report having SMART.

What program are you trying to use here? As I reported around -rc1 time, hddtemp is broken by 2.6.20-rc but Jens posted a patch to fix it.

Which I believe must already be in -rc3. I just started it after configuring it, restarted gkrellm and there they all were. But I haven't tried any earlier kernels with it either.

Quoted 8 lines

I must have missed that blurb. hddtemp is indeed the program I was
looking at. And it does seem that it is the only one broken. Just re-installed the other smartctl tools and they do work. Thanks. -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 7 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2007 by Maurice Eugene Heskett, all rights reserved.
#6 lore raw
In reply to Ed Sweetman
Quoted 7 lines · Ed Sweetman
Quoted 5 lines · Mark Lord
Quoted 1 line · Ed Sweetman

Not sure what went on between 2.6.19-rc5-mm2 and 2.6.20-rc2-mm2 in libata land but SMART is no longer available on my hdds.

It's working for me with 2.6.20-rc3, ata_piix libata driver.

Well, not in the sata_nv libata driver.

Exactly what "smartctl" command/parms are you using, and exactly what output does it produce?

Hint:

smartctl -data -a /dev/sda ## ????
---------^^^^^-----------------------