Skip to contentSkip to conversation

2.6.20-rc4-rt3 on i.MX oopses !?

DISCUSSION Steven Scholz 2 participants 2 messages Jan 12, 2007

lore
Share & tools
lore
#0 lore raw

Hi all,

anyone tried 2.6.20-rc4-rt3 on an i.MX board?

On my mx1ads I get

RAMDISK: Compressed image found at block 0

Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = c0004000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0
PC is at get_next_event_device+0x48/0x64
LR is at clockevents_next_event_available+0x24/0x60
pc : [<c0058104>]    lr : [<c0058144>]    Not tainted

sp : c0bb9ea0 ip : 00000000 fp : c0bb9eac
r10: ffffffff r9 : c01d8438 r8 : c01c6bf0
r7 : c01c4d34 r6 : c0bb8000 r5 : c01c6bf0 r4 : 20000013 r3 : c01da08c r2 : 00000000 r1 : 00000004 r0 : 00000000
Flags: nZCv IRQs off FIQs on Mode SVC_32 Segment kernel
Control: C000717F
Table: 08004000 DAC: 00000017
Process softirq-timer/0 (pid: 4, stack limit = 0xc0bb8250)

Stack: (0xc0bb9ea0 to 0xc0bba000)
< - snip - >
Backtrace:
[<c00580bc>] (get_next_event_device+0x0/0x64) from [<c0058144>]
(clockevents_next_event_available+0x24/0x60)
[<c0058120>] (clockevents_next_event_available+0x0/0x60) from [<c0055704>]
(hrtimer_run_queues+0x230/0x3c8) r5 = C01C6BF0  r4 = 00000001
[<c00554d4>] (hrtimer_run_queues+0x0/0x3c8) from [<c0045608>]
(run_timer_softirq+0xbc/0xe18)
[<c004554c>] (run_timer_softirq+0x0/0xe18) from [<c0040a08>]
(ksoftirqd+0x100/0x1b0)
[<c0040908>] (ksoftirqd+0x0/0x1b0) from [<c0051000>] (kthread+0x110/0x13c)
[<c0050ef0>] (kthread+0x0/0x13c) from [<c003d268>] (do_exit+0x0/0x8ac)
 r8 = 00000000  r7 = 00000000  r6 = 00000000  r5 = 00000000
 r4 = 00000000
Code: e15c0000 cafffff8 e59f3018 e5932000 (e5921004)
 <6>note: softirq-timer/0[4] exited with preempt_count 1

VFS: Mounted root (ext2 filesystem).
Freeing init memory: 88K

Sascha, do you know if your clocksource/clockevent patches made it into mainline?

Thanks!

Signature · 1 line
Steven
#1 lore raw
Quoted 3 lines · Steven Scholz

Hi all,

anyone tried 2.6.20-rc4-rt3 on an i.MX board?

Yes

Quoted 38 lines

On my mx1ads I get

RAMDISK: Compressed image found at block 0

Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = c0004000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0
PC is at get_next_event_device+0x48/0x64
LR is at clockevents_next_event_available+0x24/0x60
pc : [<c0058104>]    lr : [<c0058144>]    Not tainted

sp : c0bb9ea0 ip : 00000000 fp : c0bb9eac
r10: ffffffff r9 : c01d8438 r8 : c01c6bf0
r7 : c01c4d34 r6 : c0bb8000 r5 : c01c6bf0 r4 : 20000013 r3 : c01da08c r2 : 00000000 r1 : 00000004 r0 : 00000000
Flags: nZCv IRQs off FIQs on Mode SVC_32 Segment kernel
Control: C000717F
Table: 08004000 DAC: 00000017
Process softirq-timer/0 (pid: 4, stack limit = 0xc0bb8250)

Stack: (0xc0bb9ea0 to 0xc0bba000)
< - snip - >
Backtrace:
[<c00580bc>] (get_next_event_device+0x0/0x64) from [<c0058144>]
(clockevents_next_event_available+0x24/0x60)
[<c0058120>] (clockevents_next_event_available+0x0/0x60) from [<c0055704>]
(hrtimer_run_queues+0x230/0x3c8) r5 = C01C6BF0  r4 = 00000001
[<c00554d4>] (hrtimer_run_queues+0x0/0x3c8) from [<c0045608>]
(run_timer_softirq+0xbc/0xe18)
[<c004554c>] (run_timer_softirq+0x0/0xe18) from [<c0040a08>]
(ksoftirqd+0x100/0x1b0)
[<c0040908>] (ksoftirqd+0x0/0x1b0) from [<c0051000>] (kthread+0x110/0x13c)
[<c0050ef0>] (kthread+0x0/0x13c) from [<c003d268>] (do_exit+0x0/0x8ac)
 r8 = 00000000  r7 = 00000000  r6 = 00000000  r5 = 00000000
 r4 = 00000000
Code: e15c0000 cafffff8 e59f3018 e5932000 (e5921004)
 <6>note: softirq-timer/0[4] exited with preempt_count 1
Quoted 2 lines

VFS: Mounted root (ext2 filesystem).
Freeing init memory: 88K

get_next_event_device() looks like this:

static int get_next_event_device(void)

{
        struct local_events *devices = &__get_cpu_var(local_eventdevices);
        int i;

        for (i = 0; i < devices->installed; i++) {
                struct clock_event_device *evt;

                evt = devices->events[i].event;
                if (evt->capabilities & CLOCK_CAP_NEXTEVT)
                        return i;
        }

        if (global_eventdevice.event->capabilities & CLOCK_CAP_NEXTEVT)
                return GLOBAL_CLOCK_EVENT;

        return -ENODEV;
}

Loop through all available devices and search for one with CLOCK_CAP_NEXTEVT. If none is found global_eventdevice is dereferenced, which isn't set when you have no clock_event_device at all. Have you got the i.MX clockevent patch applied? You can get the latest version here:
http://www.ussg.iu.edu/hypermail/linux/kernel/0701.1/0478.html

Maybe we could emit a warning message here instead of oopsing.

Quoted 3 lines

Sascha, do you know if your clocksource/clockevent patches made it into mainline?

Clocksource yes, clockevent no

Sascha

Signature · 5 lines
 Dipl.-Ing. Sascha Hauer | http://www.pengutronix.de
  Pengutronix - Linux Solutions for Science and Industry
    Handelsregister: Amtsgericht Hildesheim, HRA 2686
      Hannoversche Str. 2, 31134 Hildesheim, Germany
    Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9