Skip to contentSkip to conversation

Strange

DISCUSSION Christoph Anton Mitterer 3 participants 7 messages Jan 23, 2007 – Jan 24, 2007

lore
Share & tools
lore
#0 lore raw

Hi.

I'm using a kernel 2.6.18.1 with a Plextor PX-769A CD/DVD drive (using the old IDE drivers)... The drive itself is brand-new. The firmware version is 1.06 (which is the most recent).

There are to issues I experience.

1) On some (but not all) DVD-Videos I get the following messages:

kernel: hdb: command error: status=0x51 { DriveReady SeekComplete Error }
kernel: hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

kernel: ide: failed opcode was: unknown
kernel: ATAPI device hdb:
kernel:   Error: Illegal request -- (Sense key=0x05)
kernel:   Read of scrambled sector without authentication -- (asc=0x6f,
ascq=0x03)
kernel:   The failed "Read 10" packet command was:
kernel:   "28 00 00 00 01 38 00 00 01 00 00 00 00 00 00 00 "
kernel: end_request: I/O error, dev hdb, sector 1248

What do they mean? Does it indicate a damage in the drive? Or a firmware error? Anyway I can read the contents of the media (and watch the movies on it)....

The error appears after mounting the discs (but as I've said, not with every disc).

Any ideas?

2) As far as I can remember, when a disc was mounted, the eject button was disabled. But now, when I press the eject button, the disc is ejected (and it seems that it is unmounted, at least mount doesn't show it any longer).

Is this the correct behaviour? I'd doubt that.

Thanks in advance,
Chris.

begin:vcard
fn:Mitterer, Christoph Anton
n:Mitterer;Christoph Anton
email;internet:[email protected]
x-mozilla-html:TRUE
version:2.1
end:vcard

#1 lore raw
Quoted 3 lines
kernel:   Error: Illegal request -- (Sense key=0x05)
kernel:   Read of scrambled sector without authentication -- (asc=0x6f,

ascq=0x03)

The disc is using digital rights management. If you are in a country that permits it you can use a dvd reader library with decss support, if not you'll have to either watch your disks on a system approved by the movie industry enforcers or commit a crime to read the disc.

Alan

#2 lore raw
Quoted 10 lines · Alan
Quoted 4 lines
kernel:   Error: Illegal request -- (Sense key=0x05)
kernel:   Read of scrambled sector without authentication -- (asc=0x6f,

ascq=0x03)

The disc is using digital rights management. If you are in a country that permits it you can use a dvd reader library with decss support, if not you'll have to either watch your disks on a system approved by the movie industry enforcers or commit a crime to read the disc.

I knew of course about libdvdcss but I've never noticed before that the kernel issues these error messages to the syslog.

So you say this is normal?! But the problem with ejecting isn't probably normal.

Best wishes,
Chris.

begin:vcard
fn:Mitterer, Christoph Anton
n:Mitterer;Christoph Anton
email;internet:[email protected]
x-mozilla-html:TRUE
version:2.1
end:vcard

#3 lore raw
Quoted 2 lines

I knew of course about libdvdcss but I've never noticed before that the kernel issues these error messages to the syslog.

Various bits of random desktop junk poll drives to see what has appeared and stick icons on desktops. Some of them do stuff that produces messages like this because they aren't careful how they probe and what they do.

Quoted 2 lines

So you say this is normal?! But the problem with ejecting isn't probably normal.

Eject is application controllable. Most movie players re-enable the button.

#5 lore raw
In reply to Christoph Anton Mitterer
Quoted 5 lines · Christoph Anton Mitterer
Quoted 4 lines · Alan
Quoted 3 lines
kernel:   Error: Illegal request -- (Sense key=0x05)
kernel:   Read of scrambled sector without authentication -- (asc=0x6f,

ascq=0x03)

Quoted 7 lines
Quoted 4 lines

The disc is using digital rights management. If you are in a country that permits it you can use a dvd reader library with decss support, if not you'll have to either watch your disks on a system approved by the movie industry enforcers or commit a crime to read the disc.

I knew of course about libdvdcss but I've never noticed before that the kernel issues these error messages to the syslog.

If you've replaced the drive, the decss keys might have changed for inserted media (this is especially true if your old drive had a different region setting).

First set the DVD region on the drive to where you are (probably 2), using "regionset". Then rm -rf ~/.dvdcss and restart your video playing application. It should rescan the dvd, figure out the keys, no error messages.

Quoted 2 lines

So you say this is normal?! But the problem with ejecting isn't probably normal.

Yeah, like Alan says it's just the DRM nonsense built into your drive trying to "protect" the media. You can find firmware modifications which remove this logic from the drive, but I'm not sure of their legality.

Signature · 5 lines
Cheers,
Alistair.

Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
#4 lore raw
In reply to Alan
Quoted 7 lines · Alan
Quoted 3 lines

I knew of course about libdvdcss but I've never noticed before that the kernel issues these error messages to the syslog.

Various bits of random desktop junk poll drives to see what has appeared and stick icons on desktops. Some of them do stuff that produces messages like this because they aren't careful how they probe and what they do.

Yes of course, but I've disabled that end-user stuff, and for convenience even tested the whole thing with runlevel 1 (single user).

Quoted 6 lines
Quoted 3 lines

So you say this is normal?! But the problem with ejecting isn't probably normal.

Eject is application controllable. Most movie players re-enable the button.

Yes I knew,.. I just wondered because that worked even when no player was started at all. But I found out that this must depend on GNOME, because when mount + eject-button from single-user,.. the disc is not ejected.
Anyway it is ejected (+unmounted) when using the eject command (but I assume that this is normal).

Thanks,
Chris.

begin:vcard
fn:Mitterer, Christoph Anton
n:Mitterer;Christoph Anton
email;internet:[email protected]
x-mozilla-html:TRUE
version:2.1
end:vcard

#6 lore raw
In reply to Alistair John Strachan
Quoted 7 lines · Alistair John Strachan
Quoted 3 lines

I knew of course about libdvdcss but I've never noticed before that the kernel issues these error messages to the syslog.

If you've replaced the drive, the decss keys might have changed for inserted media (this is especially true if your old drive had a different region setting).

Yes,... but as I've just told Alan,... it happens even when just mounting (an not using libdvdcss at all).

Quoted 2 lines

First set the DVD region on the drive to where you are (probably 2), using "regionset".

That was already done (by factory I assume):

# regionset /dev/hdb
regionset version 0.1 -- reads/sets region code on DVD drives
Current Region Code settings:
RPC Phase: II
type: SET
vendor resets available: 4
user controlled changes resets available: 4
drive plays discs from region(s): 2, mask=0xFD

Would you like to change the region setting of your drive? [y/n]:n

Quoted 4 lines

Then rm -rf ~/.dvdcss and restart your video playing application. It should rescan the dvd, figure out the keys, no error messages.

Playing just works normal (even without recreation of the dvdcss cache) it's just the syslog message when mounting that makes me nervous ;)

Thanks,
Chris.

begin:vcard
fn:Mitterer, Christoph Anton
n:Mitterer;Christoph Anton
email;internet:[email protected]
x-mozilla-html:TRUE
version:2.1
end:vcard