Xserve G5 doesn't reboot or restart properly with SMU compiled in
Hi,
We are experiencing a problem with Apple Xserve G5 (2.3G/Dual Proc.). After successfully booting the linux kernel ( tried 2.6.18, 2.6.19 or 2.6.20-rc5 ) the machine fails to boot again.
It goes thru normal led flashing and fan spinning sequence, like the first time it booted, but stops before actually reading from the boot disk. It refuses to enter OF and the only way to make it boot again is to reset internal PMU via a PMU reset button located inside the chassis. We found experimentally that disabling the SMU (leaving PMU on) in the kernel configuration leads to clean reboot with no problems.... but no /dev/rtc of course and this is a BIG problem!
Enabling I2C driver for Dallas RTC or the new RTC Class driver for RTC also locks up the machine on reboot, so I think it's i2c related. We also tried with different models of Xserve (2.0Ghz/DP) with same results....
Any help would be appreciated.
Massimiliano (Max) Vegni
IT SYSTEMS srl - Rome - Italy
Quoted 17 lines · Massimiliano Vegni
Hi,
We are experiencing a problem with Apple Xserve G5 (2.3G/Dual Proc.). After successfully booting the linux kernel ( tried 2.6.18, 2.6.19 or 2.6.20-rc5 ) the machine fails to boot again.
It goes thru normal led flashing and fan spinning sequence, like the first time it booted, but stops before actually reading from the boot disk. It refuses to enter OF and the only way to make it boot again is to reset internal PMU via a PMU reset button located inside the chassis. We found experimentally that disabling the SMU (leaving PMU on) in the kernel configuration leads to clean reboot with no problems.... but no/dev/rtcof course and this is a BIG problem!
Enabling I2C driver for Dallas RTC or the new RTC Class driver for RTC also locks up the machine on reboot, so I think it's i2c related. We also tried with different models of Xserve (2.0Ghz/DP) with same results....
Quoted 1 line
Any help would be appreciated.
Hrm... that is strange... Are you absolutely sure that is related to the SMU ? There is no SMU in that machine and thus I wouldn't expect the SMU driver to instanciate at all nor do anything in fact.
The RTC flass driver stuff is bogus, don't use that. It's know to cause that sort of problems.
I'll give a go at the Xserve I have here see if I can reproduce the problem.
Also send me your .config
Ben.
Ok Ben,
didn't know anything about RTC class reliability.
Maybe I can tell you more, i've tried even more configurations and i was able to lock up my machine in several ways....
Here the list of drivers that caused the problems...
RTC Class + Dallas/Maxim DS1307 .... the bogus one
Maxim/Dallas Semiconductor DS1374 Real Time Clock in Miscellaneous I2C Chip Support or DS1337...
and of course Support for SMU based macs....
I started thinking about something in the hardware RTC that causes trouble to the firmware on the next boot.
By the way... still no working RTC.....
Ciao.
Massimiliano
Quoted 27 lines · Benjamin Herrenschmidt
Quoted 17 lines · Massimiliano Vegni
Hi,
We are experiencing a problem with Apple Xserve G5 (2.3G/Dual Proc.). After successfully booting the linux kernel ( tried 2.6.18, 2.6.19 or 2.6.20-rc5 ) the machine fails to boot again.
It goes thru normal led flashing and fan spinning sequence, like the first time it booted, but stops before actually reading from the boot disk. It refuses to enter OF and the only way to make it boot again is to reset internal PMU via a PMU reset button located inside the chassis. We found experimentally that disabling the SMU (leaving PMU on) in the kernel configuration leads to clean reboot with no problems.... but no/dev/rtcof course and this is a BIG problem!
Enabling I2C driver for Dallas RTC or the new RTC Class driver for RTC also locks up the machine on reboot, so I think it's i2c related. We also tried with different models of Xserve (2.0Ghz/DP) with same results....Quoted 1 line
Any help would be appreciated.
Hrm... that is strange... Are you absolutely sure that is related to the SMU ? There is no SMU in that machine and thus I wouldn't expect the SMU driver to instanciate at all nor do anything in fact.
The RTC flass driver stuff is bogus, don't use that. It's know to cause that sort of problems.
Quoted 8 lines
I'll give a go at the Xserve I have here see if I can reproduce the problem.
Also send me your .config
Ben.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Mon Jan 22 17:43:38 2007
#CONFIG_PPC64=yCONFIG_64BIT=yCONFIG_PPC_MERGE=yCONFIG_MMU=yCONFIG_GENERIC_HARDIRQS=yCONFIG_IRQ_PER_CPU=yCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_ARCH_HAS_ILOG2_U32=yCONFIG_ARCH_HAS_ILOG2_U64=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_PPC=yCONFIG_EARLY_PRINTK=yCONFIG_COMPAT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not setCONFIG_GENERIC_TBSYNC=yCONFIG_AUDIT_ARCH=yCONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#CONFIG_POWER4_ONLY=yCONFIG_POWER4=yCONFIG_PPC_FPU=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set CONFIG_ALTIVEC=yCONFIG_PPC_STD_MMU=y
# CONFIG_VIRT_CPU_ACCOUNTING is not set CONFIG_SMP=yCONFIG_NR_CPUS=4 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_IPC_NS=yCONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not setCONFIG_UTS_NS=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not setCONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_STOP_MACHINE=y
#
# Block layer
#CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Platform support
#CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_MPC52xx is not setCONFIG_PPC_PMAC=yCONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PPC_PS3 is not setCONFIG_PPC_NATIVE=yCONFIG_U3_DART=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not setCONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not setCONFIG_PPC_970_NAP=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not setCONFIG_MPIC=y
#
# Kernel options
#
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_BKL=yCONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not setCONFIG_FORCE_MAX_ZONEORDER=13CONFIG_IOMMU_VMERGE=y
# CONFIG_HOTPLUG_CPU is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not setCONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not setCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not setCONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not setCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_RESOURCES_64BIT=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not setCONFIG_PROC_DEVICETREE=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE="console=ttyS0 root=/dev/sda3"
# CONFIG_PM is not set
# CONFIG_SECCOMP is not setCONFIG_ISA_DMA_API=y
#
# Bus options
#CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not setCONFIG_PCI=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not setCONFIG_KERNEL_START=0xc000000000000000
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not setCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=yCONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not setCONFIG_BLK_DEV_IDE_PMAC=yCONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=yCONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_IDE_ARM is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=y
# CONFIG_SCSI_TGT is not setCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not setCONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers #CONFIG_ATA=y
# CONFIG_SATA_AHCI is not setCONFIG_SATA_SVW=y
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#CONFIG_ADB_PMU=y
# CONFIG_ADB_PMU_LED is not set
# CONFIG_PMAC_SMU is not set
# CONFIG_MAC_EMUMOUSEBTN is not setCONFIG_THERM_PM72=yCONFIG_WINDFARM=yCONFIG_PMAC_RACKMETER=y
#
# Network device support
#CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not setCONFIG_TIGON3=yCONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_PMACZILOG=yCONFIG_SERIAL_PMACZILOG_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not setCONFIG_GEN_RTC=yCONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#CONFIG_HID=y
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#CONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_HEARTBEAT=y
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #
#
# Real Time Clock
#CONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
#CONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=y
#
# Virtualization
#
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not setCONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not setCONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not setCONFIG_HFS_FS=yCONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#CONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not setCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=yCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not setCONFIG_NFSD_TCP=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC32=yCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_PLIST=yCONFIG_IOMAP_COPY=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not setCONFIG_LOG_BUF_SHIFT=15CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_IRQSTACKS is not setCONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
Quoted 3 lines · Massimiliano Vegni
Ok Ben,
didn't know anything about RTC class reliability.
Well, it's also not useful on powermacs at all :-)
Quoted 6 lines
Maybe I can tell you more, i've tried even more configurations and i was able to lock up my machine in several ways....
Here the list of drivers that caused the problems...RTC Class + Dallas/Maxim DS1307 .... the bogus one
Quoted 8 lines
Maxim/Dallas Semiconductor DS1374 Real Time Clock in Miscellaneous I2C Chip Support or DS1337...
and of course Support for SMU based macs....
I started thinking about something in the hardware RTC that causes trouble to the firmware on the next boot.
By the way... still no working RTC.....
The RTC is handled by the PMU on powermacs and thus should work with CONFIG_GEN_RTC.
Have you tried just using a g5_defconfig ? That should just work...
Ben.
Quoted 1,355 lines
Ciao.
Massimiliano
Quoted 27 lines · Benjamin Herrenschmidt
Quoted 17 lines · Massimiliano Vegni
Hi,
We are experiencing a problem with Apple Xserve G5 (2.3G/Dual Proc.). After successfully booting the linux kernel ( tried 2.6.18, 2.6.19 or 2.6.20-rc5 ) the machine fails to boot again.
It goes thru normal led flashing and fan spinning sequence, like the first time it booted, but stops before actually reading from the boot disk. It refuses to enter OF and the only way to make it boot again is to reset internal PMU via a PMU reset button located inside the chassis. We found experimentally that disabling the SMU (leaving PMU on) in the kernel configuration leads to clean reboot with no problems.... but no/dev/rtcof course and this is a BIG problem!
Enabling I2C driver for Dallas RTC or the new RTC Class driver for RTC also locks up the machine on reboot, so I think it's i2c related. We also tried with different models of Xserve (2.0Ghz/DP) with same results....Quoted 1 line
Any help would be appreciated.
Hrm... that is strange... Are you absolutely sure that is related to the SMU ? There is no SMU in that machine and thus I wouldn't expect the SMU driver to instanciate at all nor do anything in fact.
The RTC flass driver stuff is bogus, don't use that. It's know to cause that sort of problems.
Quoted 8 lines
I'll give a go at the Xserve I have here see if I can reproduce the problem.
Also send me your .config
Ben.
plain text document attachment (config)
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Mon Jan 22 17:43:38 2007
#CONFIG_PPC64=yCONFIG_64BIT=yCONFIG_PPC_MERGE=yCONFIG_MMU=yCONFIG_GENERIC_HARDIRQS=yCONFIG_IRQ_PER_CPU=yCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_ARCH_HAS_ILOG2_U32=yCONFIG_ARCH_HAS_ILOG2_U64=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_PPC=yCONFIG_EARLY_PRINTK=yCONFIG_COMPAT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_PPC_OF=y
#CONFIG_PPC_UDBG_16550is not setCONFIG_GENERIC_TBSYNC=yCONFIG_AUDIT_ARCH=yCONFIG_GENERIC_BUG=y
#CONFIG_DEFAULT_UIMAGEis not set#
# Processor support
#CONFIG_POWER4_ONLY=yCONFIG_POWER4=yCONFIG_PPC_FPU=y
#CONFIG_PPC_DCR_NATIVEis not set
#CONFIG_PPC_DCR_MMIOis not set
#CONFIG_PPC_OF_PLATFORM_PCIis not setCONFIG_ALTIVEC=yCONFIG_PPC_STD_MMU=y
#CONFIG_VIRT_CPU_ACCOUNTINGis not setCONFIG_SMP=yCONFIG_NR_CPUS=4CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32#
# General setup
#CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_IPC_NS=yCONFIG_POSIX_MQUEUE=y
#CONFIG_BSD_PROCESS_ACCTis not set
#CONFIG_TASKSTATSis not setCONFIG_UTS_NS=y
#CONFIG_AUDITis not set
#CONFIG_IKCONFIGis not set
#CONFIG_CPUSETSis not set
#CONFIG_SYSFS_DEPRECATEDis not set
#CONFIG_RELAYis not setCONFIG_INITRAMFS_SOURCE=""
#CONFIG_CC_OPTIMIZE_FOR_SIZEis not setCONFIG_SYSCTL=y
#CONFIG_EMBEDDEDis not setCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=y
#CONFIG_KALLSYMS_EXTRA_PASSis not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_RT_MUTEXES=y
#CONFIG_TINY_SHMEMis not setCONFIG_BASE_SMALL=0
#CONFIG_SLOBis not set#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
#CONFIG_MODVERSIONSis not set
#CONFIG_MODULE_SRCVERSION_ALLis not setCONFIG_KMOD=yCONFIG_STOP_MACHINE=y#
# Block layer
#CONFIG_BLOCK=y
#CONFIG_BLK_DEV_IO_TRACEis not set#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
#CONFIG_IOSCHED_ASis not set
#CONFIG_IOSCHED_DEADLINEis not setCONFIG_IOSCHED_CFQ=y
#CONFIG_DEFAULT_ASis not set
#CONFIG_DEFAULT_DEADLINEis not setCONFIG_DEFAULT_CFQ=y
#CONFIG_DEFAULT_NOOPis not setCONFIG_DEFAULT_IOSCHED="cfq"#
# Platform support
#CONFIG_PPC_MULTIPLATFORM=y
#CONFIG_EMBEDDED6xxis not set
#CONFIG_APUSis not set
#CONFIG_PPC_PSERIESis not set
#CONFIG_PPC_ISERIESis not set
#CONFIG_PPC_MPC52xxis not setCONFIG_PPC_PMAC=yCONFIG_PPC_PMAC64=y
#CONFIG_PPC_MAPLEis not set
#CONFIG_PPC_PASEMIis not set
#CONFIG_PPC_CELLis not set
#CONFIG_PPC_CELL_NATIVEis not set
#CONFIG_PPC_IBM_CELL_BLADEis not set
#CONFIG_PPC_PS3is not setCONFIG_PPC_NATIVE=yCONFIG_U3_DART=y
#CONFIG_PPC_RTASis not set
#CONFIG_MMIO_NVRAMis not setCONFIG_MPIC_BROKEN_U3=y
#CONFIG_PPC_MPC106is not setCONFIG_PPC_970_NAP=y
#CONFIG_PPC_INDIRECT_IOis not set
#CONFIG_GENERIC_IOMAPis not set
#CONFIG_CPU_FREQis not set
#CONFIG_WANT_EARLY_SERIALis not setCONFIG_MPIC=y#
# Kernel options
#
#CONFIG_HZ_100is not setCONFIG_HZ_250=y
#CONFIG_HZ_300is not set
#CONFIG_HZ_1000is not setCONFIG_HZ=250
#CONFIG_PREEMPT_NONEis not set
#CONFIG_PREEMPT_VOLUNTARYis not setCONFIG_PREEMPT=yCONFIG_PREEMPT_BKL=yCONFIG_BINFMT_ELF=y
#CONFIG_BINFMT_MISCis not setCONFIG_FORCE_MAX_ZONEORDER=13CONFIG_IOMMU_VMERGE=y
#CONFIG_HOTPLUG_CPUis not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#CONFIG_KEXECis not set
#CONFIG_CRASH_DUMPis not setCONFIG_IRQ_ALL_CPUS=y
#CONFIG_NUMAis not setCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_SELECT_MEMORY_MODEL=y
#CONFIG_FLATMEM_MANUALis not set
#CONFIG_DISCONTIGMEM_MANUALis not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=y
#CONFIG_SPARSEMEM_STATICis not setCONFIG_SPARSEMEM_EXTREME=y
#CONFIG_MEMORY_HOTPLUGis not setCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_RESOURCES_64BIT=y
#CONFIG_PPC_64K_PAGESis not set
#CONFIG_SCHED_SMTis not setCONFIG_PROC_DEVICETREE=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE="console=ttyS0root=/dev/sda3"
#CONFIG_PMis not set
#CONFIG_SECCOMPis not setCONFIG_ISA_DMA_API=y#
# Bus options
#CONFIG_GENERIC_ISA_DMA=y
#CONFIG_MPIC_WEIRDis not set
#CONFIG_PPC_I8259is not set
#CONFIG_PPC_INDIRECT_PCIis not setCONFIG_PCI=yCONFIG_PCI_DOMAINS=y
#CONFIG_PCIEPORTBUSis not set#
# PCCARD (PCMCIA/CardBus) support
#
#CONFIG_PCCARDis not set#
# PCI Hotplug Support
#
#CONFIG_HOTPLUG_PCIis not setCONFIG_KERNEL_START=0xc000000000000000#
# Networking
#CONFIG_NET=y#
# Networking options
#
#CONFIG_NETDEBUGis not setCONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
#CONFIG_XFRM_USERis not set
#CONFIG_XFRM_SUB_POLICYis not set
#CONFIG_NET_KEYis not setCONFIG_INET=y
#CONFIG_IP_MULTICASTis not set
#CONFIG_IP_ADVANCED_ROUTERis not setCONFIG_IP_FIB_HASH=y
#CONFIG_IP_PNPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not set
#CONFIG_ARPDis not set
#CONFIG_SYN_COOKIESis not set
#CONFIG_INET_AHis not set
#CONFIG_INET_ESPis not set
#CONFIG_INET_IPCOMPis not set
#CONFIG_INET_XFRM_TUNNELis not set
#CONFIG_INET_TUNNELis not setCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=y
#CONFIG_INET_DIAGis not set
#CONFIG_TCP_CONG_ADVANCEDis not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
#CONFIG_TCP_MD5SIGis not set
#CONFIG_IPV6is not set
#CONFIG_INET6_XFRM_TUNNELis not set
#CONFIG_INET6_TUNNELis not set
#CONFIG_NETWORK_SECMARKis not set
#CONFIG_NETFILTERis not set#
# DCCP Configuration (EXPERIMENTAL)
#
#CONFIG_IP_DCCPis not set#
# SCTP Configuration (EXPERIMENTAL)
#
#CONFIG_IP_SCTPis not set#
# TIPC Configuration (EXPERIMENTAL)
#
#CONFIG_TIPCis not set
#CONFIG_ATMis not set
#CONFIG_BRIDGEis not set
#CONFIG_VLAN_8021Qis not set
#CONFIG_DECNETis not set
#CONFIG_LLC2is not set
#CONFIG_IPXis not set
#CONFIG_ATALKis not set
#CONFIG_X25is not set
#CONFIG_LAPBis not set
#CONFIG_ECONETis not set
#CONFIG_WAN_ROUTERis not set#
# QoS and/or fair queueing
#
#CONFIG_NET_SCHEDis not set#
# Network testing
#
#CONFIG_NET_PKTGENis not set
#CONFIG_HAMRADIOis not set
#CONFIG_IRDAis not set
#CONFIG_BTis not set
#CONFIG_IEEE80211is not set#
# Device Drivers
##
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=y
#CONFIG_FW_LOADERis not set
#CONFIG_SYS_HYPERVISORis not set#
# Connector - unified userspace <-> kernelspace linker #
#CONFIG_CONNECTORis not set#
# Memory Technology Devices (MTD)
#
#CONFIG_MTDis not set#
# Parallel port support
#
#CONFIG_PARPORTis not set#
# Plug and Play support
##
# Block devices
#
#CONFIG_BLK_DEV_FDis not set
#CONFIG_BLK_CPQ_DAis not set
#CONFIG_BLK_CPQ_CISS_DAis not set
#CONFIG_BLK_DEV_DAC960is not set
#CONFIG_BLK_DEV_UMEMis not set
#CONFIG_BLK_DEV_COW_COMMONis not setCONFIG_BLK_DEV_LOOP=y
#CONFIG_BLK_DEV_CRYPTOLOOPis not set
#CONFIG_BLK_DEV_NBDis not set
#CONFIG_BLK_DEV_SX8is not set
#CONFIG_BLK_DEV_UBis not set
#CONFIG_BLK_DEV_RAMis not set
#CONFIG_BLK_DEV_INITRDis not set
#CONFIG_CDROM_PKTCDVDis not set
#CONFIG_ATA_OVER_ETHis not set#
# Misc devices
#
#CONFIG_SGI_IOC4is not set
#CONFIG_TIFM_COREis not set#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y#
# Please seeDocumentation/ide.txtfor help/info on IDE drives #
#CONFIG_BLK_DEV_IDE_SATAis not set
#CONFIG_BLK_DEV_IDEDISKis not set
#CONFIG_IDEDISK_MULTI_MODEis not setCONFIG_BLK_DEV_IDECD=y
#CONFIG_BLK_DEV_IDETAPEis not set
#CONFIG_BLK_DEV_IDEFLOPPYis not set
#CONFIG_BLK_DEV_IDESCSIis not set
#CONFIG_IDE_TASK_IOCTLis not set#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=yCONFIG_BLK_DEV_IDEPCI=y
#CONFIG_IDEPCI_SHARE_IRQis not set
#CONFIG_BLK_DEV_OFFBOARDis not set
#CONFIG_BLK_DEV_GENERICis not set
#CONFIG_BLK_DEV_OPTI621is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
#CONFIG_BLK_DEV_IDEDMA_FORCEDis not set
#CONFIG_IDEDMA_PCI_AUTOis not set
#CONFIG_BLK_DEV_AEC62XXis not set
#CONFIG_BLK_DEV_ALI15X3is not set
#CONFIG_BLK_DEV_AMD74XXis not set
#CONFIG_BLK_DEV_CMD64Xis not set
#CONFIG_BLK_DEV_TRIFLEXis not set
#CONFIG_BLK_DEV_CY82C693is not set
#CONFIG_BLK_DEV_CS5520is not set
#CONFIG_BLK_DEV_CS5530is not set
#CONFIG_BLK_DEV_HPT34Xis not set
#CONFIG_BLK_DEV_HPT366is not set
#CONFIG_BLK_DEV_JMICRONis not set
#CONFIG_BLK_DEV_SC1200is not set
#CONFIG_BLK_DEV_PIIXis not set
#CONFIG_BLK_DEV_IT821Xis not set
#CONFIG_BLK_DEV_NS87415is not set
#CONFIG_BLK_DEV_PDC202XX_OLDis not set
#CONFIG_BLK_DEV_PDC202XX_NEWis not set
#CONFIG_BLK_DEV_SVWKSis not set
#CONFIG_BLK_DEV_SIIMAGEis not set
#CONFIG_BLK_DEV_SL82C105is not set
#CONFIG_BLK_DEV_SLC90E66is not set
#CONFIG_BLK_DEV_TRM290is not set
#CONFIG_BLK_DEV_VIA82CXXXis not setCONFIG_BLK_DEV_IDE_PMAC=yCONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=yCONFIG_BLK_DEV_IDEDMA_PMAC=y
#CONFIG_IDE_ARMis not setCONFIG_BLK_DEV_IDEDMA=y
#CONFIG_IDEDMA_IVBis not set
#CONFIG_IDEDMA_AUTOis not set
#CONFIG_BLK_DEV_HDis not set#
# SCSI device support
#
#CONFIG_RAID_ATTRSis not setCONFIG_SCSI=y
#CONFIG_SCSI_TGTis not setCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
#CONFIG_CHR_DEV_STis not set
#CONFIG_CHR_DEV_OSSTis not setCONFIG_BLK_DEV_SR=y
#CONFIG_BLK_DEV_SR_VENDORis not set
#CONFIG_CHR_DEV_SGis not set
#CONFIG_CHR_DEV_SCHis not set#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
#CONFIG_SCSI_MULTI_LUNis not set
#CONFIG_SCSI_CONSTANTSis not set
#CONFIG_SCSI_LOGGINGis not set
#CONFIG_SCSI_SCAN_ASYNCis not set#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=y
#CONFIG_SCSI_ISCSI_ATTRSis not setCONFIG_SCSI_SAS_ATTRS=y
#CONFIG_SCSI_SAS_LIBSASis not set#
# SCSI low-level drivers
#
#CONFIG_ISCSI_TCPis not set
#CONFIG_BLK_DEV_3W_XXXX_RAIDis not set
#CONFIG_SCSI_3W_9XXXis not set
#CONFIG_SCSI_ACARDis not set
#CONFIG_SCSI_AACRAIDis not set
#CONFIG_SCSI_AIC7XXXis not set
#CONFIG_SCSI_AIC7XXX_OLDis not set
#CONFIG_SCSI_AIC79XXis not set
#CONFIG_SCSI_AIC94XXis not set
#CONFIG_SCSI_ARCMSRis not set
#CONFIG_MEGARAID_NEWGENis not set
#CONFIG_MEGARAID_LEGACYis not set
#CONFIG_MEGARAID_SASis not set
#CONFIG_SCSI_HPTIOPis not set
#CONFIG_SCSI_BUSLOGICis not set
#CONFIG_SCSI_DMX3191Dis not set
#CONFIG_SCSI_EATAis not set
#CONFIG_SCSI_FUTURE_DOMAINis not set
#CONFIG_SCSI_GDTHis not set
#CONFIG_SCSI_IPSis not set
#CONFIG_SCSI_INITIOis not set
#CONFIG_SCSI_INIA100is not set
#CONFIG_SCSI_STEXis not set
#CONFIG_SCSI_SYM53C8XX_2is not set
#CONFIG_SCSI_IPRis not set
#CONFIG_SCSI_QLOGIC_1280is not set
#CONFIG_SCSI_QLA_FCis not set
#CONFIG_SCSI_QLA_ISCSIis not set
#CONFIG_SCSI_LPFCis not set
#CONFIG_SCSI_DC395xis not set
#CONFIG_SCSI_DC390Tis not set
#CONFIG_SCSI_DEBUGis not set
#CONFIG_SCSI_SRPis not set#
# Serial ATA (prod) and Parallel ATA (experimental) drivers #CONFIG_ATA=y
#CONFIG_SATA_AHCIis not setCONFIG_SATA_SVW=y
#CONFIG_ATA_PIIXis not set
#CONFIG_SATA_MVis not set
#CONFIG_SATA_NVis not set
#CONFIG_PDC_ADMAis not set
#CONFIG_SATA_QSTORis not set
#CONFIG_SATA_PROMISEis not set
#CONFIG_SATA_SX4is not set
#CONFIG_SATA_SILis not set
#CONFIG_SATA_SIL24is not set
#CONFIG_SATA_SISis not set
#CONFIG_SATA_ULIis not set
#CONFIG_SATA_VIAis not set
#CONFIG_SATA_VITESSEis not set
#CONFIG_PATA_ALIis not set
#CONFIG_PATA_AMDis not set
#CONFIG_PATA_ARTOPis not set
#CONFIG_PATA_ATIIXPis not set
#CONFIG_PATA_CMD64Xis not set
#CONFIG_PATA_CS5520is not set
#CONFIG_PATA_CS5530is not set
#CONFIG_PATA_CYPRESSis not set
#CONFIG_PATA_EFARis not set
#CONFIG_ATA_GENERICis not set
#CONFIG_PATA_HPT366is not set
#CONFIG_PATA_HPT37Xis not set
#CONFIG_PATA_HPT3X2Nis not set
#CONFIG_PATA_HPT3X3is not set
#CONFIG_PATA_IT821Xis not set
#CONFIG_PATA_JMICRONis not set
#CONFIG_PATA_TRIFLEXis not set
#CONFIG_PATA_MARVELLis not set
#CONFIG_PATA_MPIIXis not set
#CONFIG_PATA_OLDPIIXis not set
#CONFIG_PATA_NETCELLis not set
#CONFIG_PATA_NS87410is not set
#CONFIG_PATA_OPTIis not set
#CONFIG_PATA_OPTIDMAis not set
#CONFIG_PATA_PDC_OLDis not set
#CONFIG_PATA_RADISYSis not set
#CONFIG_PATA_RZ1000is not set
#CONFIG_PATA_SC1200is not set
#CONFIG_PATA_SERVERWORKSis not set
#CONFIG_PATA_PDC2027Xis not set
#CONFIG_PATA_SIL680is not set
#CONFIG_PATA_SISis not set
#CONFIG_PATA_VIAis not set
#CONFIG_PATA_WINBONDis not set#
# Multi-device support (RAID and LVM)
#
#CONFIG_MDis not set#
# Fusion MPT device support
#
#CONFIG_FUSIONis not set
#CONFIG_FUSION_SPIis not set
#CONFIG_FUSION_FCis not set
#CONFIG_FUSION_SASis not set#
# IEEE 1394 (FireWire) support
#
#CONFIG_IEEE1394is not set#
# I2O device support
#
#CONFIG_I2Ois not set#
# Macintosh device drivers
#CONFIG_ADB_PMU=y
#CONFIG_ADB_PMU_LEDis not set
#CONFIG_PMAC_SMUis not set
#CONFIG_MAC_EMUMOUSEBTNis not setCONFIG_THERM_PM72=yCONFIG_WINDFARM=yCONFIG_PMAC_RACKMETER=y#
# Network device support
#CONFIG_NETDEVICES=y
#CONFIG_DUMMYis not set
#CONFIG_BONDINGis not set
#CONFIG_EQUALIZERis not set
#CONFIG_TUNis not set#
# ARCnet devices
#
#CONFIG_ARCNETis not set#
# PHY device support
##
# Ethernet (10 or 100Mbit)
#
#CONFIG_NET_ETHERNETis not set#
# Ethernet (1000 Mbit)
#
#CONFIG_ACENICis not set
#CONFIG_DL2Kis not set
#CONFIG_E1000is not set
#CONFIG_NS83820is not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_R8169is not set
#CONFIG_SIS190is not set
#CONFIG_SKGEis not set
#CONFIG_SKY2is not set
#CONFIG_SK98LINis not setCONFIG_TIGON3=yCONFIG_BNX2=y
#CONFIG_QLA3XXXis not set#
# Ethernet (10000 Mbit)
#
#CONFIG_CHELSIO_T1is not set
#CONFIG_IXGBis not set
#CONFIG_S2IOis not set
#CONFIG_MYRI10GEis not set
#CONFIG_NETXEN_NICis not set#
# Token Ring devices
#
#CONFIG_TRis not set#
# Wireless LAN (non-hamradio)
#
#CONFIG_NET_RADIOis not set#
# Wan interfaces
#
#CONFIG_WANis not set
#CONFIG_FDDIis not set
#CONFIG_HIPPIis not set
#CONFIG_PPPis not set
#CONFIG_SLIPis not set
#CONFIG_NET_FCis not set
#CONFIG_SHAPERis not set
#CONFIG_NETCONSOLEis not set
#CONFIG_NETPOLLis not set
#CONFIG_NET_POLL_CONTROLLERis not set#
# ISDN subsystem
#
#CONFIG_ISDNis not set#
# Telephony Support
#
#CONFIG_PHONEis not set#
# Input device support
#CONFIG_INPUT=y
#CONFIG_INPUT_FF_MEMLESSis not set#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
#CONFIG_INPUT_MOUSEDEV_PSAUXis not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#CONFIG_INPUT_JOYDEVis not set
#CONFIG_INPUT_TSDEVis not set
#CONFIG_INPUT_EVDEVis not set
#CONFIG_INPUT_EVBUGis not set#
# Input Device Drivers
#
#CONFIG_INPUT_KEYBOARDis not set
#CONFIG_INPUT_MOUSEis not set
#CONFIG_INPUT_JOYSTICKis not set
#CONFIG_INPUT_TOUCHSCREENis not set
#CONFIG_INPUT_MISCis not set#
# Hardware I/O ports
#
#CONFIG_SERIOis not set
#CONFIG_GAMEPORTis not set#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
#CONFIG_VT_HW_CONSOLE_BINDINGis not set
#CONFIG_SERIAL_NONSTANDARDis not set#
# Serial drivers
#
#CONFIG_SERIAL_8250is not set#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_PMACZILOG=yCONFIG_SERIAL_PMACZILOG_CONSOLE=y
#CONFIG_SERIAL_JSMis not setCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256#
# IPMI
#
#CONFIG_IPMI_HANDLERis not set#
# Watchdog Cards
#
#CONFIG_WATCHDOGis not set
#CONFIG_HW_RANDOMis not set
#CONFIG_NVRAMis not setCONFIG_GEN_RTC=yCONFIG_GEN_RTC_X=y
#CONFIG_DTLKis not set
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set
#CONFIG_AGPis not set
#CONFIG_DRMis not set
#CONFIG_RAW_DRIVERis not set
#CONFIG_HANGCHECK_TIMERis not set#
# TPM devices
#
#CONFIG_TCG_TPMis not set#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_CHARDEV=y#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=yCONFIG_I2C_ALGOPCA=y#
# I2C Hardware Bus support
#
#CONFIG_I2C_ALI1535is not set
#CONFIG_I2C_ALI1563is not set
#CONFIG_I2C_ALI15X3is not set
#CONFIG_I2C_AMD756is not set
#CONFIG_I2C_AMD8111is not set
#CONFIG_I2C_I801is not set
#CONFIG_I2C_I810is not set
#CONFIG_I2C_PIIX4is not setCONFIG_I2C_POWERMAC=y
#CONFIG_I2C_NFORCE2is not set
#CONFIG_I2C_OCORESis not set
#CONFIG_I2C_PARPORT_LIGHTis not set
#CONFIG_I2C_PROSAVAGEis not set
#CONFIG_I2C_SAVAGE4is not set
#CONFIG_I2C_SIS5595is not set
#CONFIG_I2C_SIS630is not set
#CONFIG_I2C_SIS96Xis not set
#CONFIG_I2C_STUBis not set
#CONFIG_I2C_VIAis not set
#CONFIG_I2C_VIAPROis not set
#CONFIG_I2C_VOODOO3is not set
#CONFIG_I2C_PCA_ISAis not set#
# Miscellaneous I2C Chip support
#
#CONFIG_SENSORS_DS1337is not set
#CONFIG_SENSORS_DS1374is not set
#CONFIG_SENSORS_EEPROMis not set
#CONFIG_SENSORS_PCF8574is not set
#CONFIG_SENSORS_PCA9539is not set
#CONFIG_SENSORS_PCF8591is not set
#CONFIG_SENSORS_MAX6875is not set
#CONFIG_I2C_DEBUG_COREis not set
#CONFIG_I2C_DEBUG_ALGOis not set
#CONFIG_I2C_DEBUG_BUSis not set
#CONFIG_I2C_DEBUG_CHIPis not set#
# SPI support
#
#CONFIG_SPIis not set
#CONFIG_SPI_MASTERis not set#
# Dallas's 1-wire bus
#
#CONFIG_W1is not set#
# Hardware Monitoring support
#
#CONFIG_HWMONis not set
#CONFIG_HWMON_VIDis not set#
# Multimedia devices
#
#CONFIG_VIDEO_DEVis not set#
# Digital Video Broadcasting Devices
#
#CONFIG_DVBis not set
#CONFIG_USB_DABUSBis not set#
# Graphics support
#
#CONFIG_FIRMWARE_EDIDis not set
#CONFIG_FBis not set
#CONFIG_FB_IBM_GXT4500is not set#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
#CONFIG_VGACON_SOFT_SCROLLBACKis not setCONFIG_DUMMY_CONSOLE=y
#CONFIG_BACKLIGHT_LCD_SUPPORTis not set#
# Sound
#
#CONFIG_SOUNDis not set#
# HID Devices
#CONFIG_HID=y#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
#CONFIG_USB_DEBUGis not set#
# Miscellaneous USB options
#
#CONFIG_USB_DEVICEFSis not set
#CONFIG_USB_BANDWIDTHis not set
#CONFIG_USB_DYNAMIC_MINORSis not set
#CONFIG_USB_MULTITHREAD_PROBEis not set
#CONFIG_USB_OTGis not set#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
#CONFIG_USB_EHCI_TT_NEWSCHEDis not set
#CONFIG_USB_ISP116X_HCDis not setCONFIG_USB_OHCI_HCD=y
#CONFIG_USB_OHCI_BIG_ENDIANis not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
#CONFIG_USB_SL811_HCDis not set#
# USB Device Class drivers
#
#CONFIG_USB_ACMis not set
#CONFIG_USB_PRINTERis not set#
# NOTE:USB_STORAGEenables SCSI, and 'SCSI disk support' ##
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_USB_HIDINPUT_POWERBOOK=y
#CONFIG_HID_FFis not setCONFIG_USB_HIDDEV=y
#CONFIG_USB_AIPTEKis not set
#CONFIG_USB_WACOMis not set
#CONFIG_USB_ACECADis not set
#CONFIG_USB_KBTABis not set
#CONFIG_USB_POWERMATEis not set
#CONFIG_USB_TOUCHSCREENis not set
#CONFIG_USB_YEALINKis not set
#CONFIG_USB_XPADis not set
#CONFIG_USB_ATI_REMOTEis not set
#CONFIG_USB_ATI_REMOTE2is not set
#CONFIG_USB_KEYSPAN_REMOTEis not set
#CONFIG_USB_APPLETOUCHis not set#
# USB Imaging devices
#
#CONFIG_USB_MDC800is not set
#CONFIG_USB_MICROTEKis not set#
# USB Network Adapters
#
#CONFIG_USB_CATCis not set
#CONFIG_USB_KAWETHis not set
#CONFIG_USB_PEGASUSis not set
#CONFIG_USB_RTL8150is not set
#CONFIG_USB_USBNET_MIIis not set
#CONFIG_USB_USBNETis not set
#CONFIG_USB_MONis not set#
# USB port drivers
##
# USB Serial Converter support
#
#CONFIG_USB_SERIALis not set#
# USB Miscellaneous drivers
#
#CONFIG_USB_EMI62is not set
#CONFIG_USB_EMI26is not set
#CONFIG_USB_ADUTUXis not set
#CONFIG_USB_AUERSWALDis not set
#CONFIG_USB_RIO500is not set
#CONFIG_USB_LEGOTOWERis not set
#CONFIG_USB_LCDis not set
#CONFIG_USB_LEDis not set
#CONFIG_USB_CYPRESS_CY7C63is not set
#CONFIG_USB_CYTHERMis not set
#CONFIG_USB_PHIDGETis not set
#CONFIG_USB_IDMOUSEis not set
#CONFIG_USB_FTDI_ELANis not set
#CONFIG_USB_APPLEDISPLAYis not set
#CONFIG_USB_SISUSBVGAis not set
#CONFIG_USB_LDis not set
#CONFIG_USB_TRANCEVIBRATORis not set#
# USB DSL modem support
##
# USB Gadget Support
#
#CONFIG_USB_GADGETis not set#
# MMC/SD Card support
#
#CONFIG_MMCis not set#
# LED devices
#CONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y#
# LED drivers
##
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_HEARTBEAT=y#
# InfiniBand support
#
#CONFIG_INFINIBANDis not set#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) ##
# Real Time Clock
#CONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_DEBUG=y#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
#CONFIG_RTC_INTF_DEV_UIE_EMULis not set#
# RTC drivers
#
#CONFIG_RTC_DRV_X1205is not set
#CONFIG_RTC_DRV_DS1307is not set
#CONFIG_RTC_DRV_DS1553is not set
#CONFIG_RTC_DRV_ISL1208is not set
#CONFIG_RTC_DRV_DS1672is not set
#CONFIG_RTC_DRV_DS1742is not set
#CONFIG_RTC_DRV_PCF8563is not set
#CONFIG_RTC_DRV_PCF8583is not set
#CONFIG_RTC_DRV_RS5C372is not set
#CONFIG_RTC_DRV_M48T86is not set
#CONFIG_RTC_DRV_TESTis not set
#CONFIG_RTC_DRV_V3020is not set#
# DMA Engine support
#CONFIG_DMA_ENGINE=y#
# DMA Clients
#CONFIG_NET_DMA=y#
# DMA Devices
#CONFIG_INTEL_IOATDMA=y#
# Virtualization
##
# File systems
#CONFIG_EXT2_FS=y
#CONFIG_EXT2_FS_XATTRis not set
#CONFIG_EXT2_FS_XIPis not setCONFIG_EXT3_FS=y
#CONFIG_EXT3_FS_XATTRis not set
#CONFIG_EXT4DEV_FSis not setCONFIG_JBD=y
#CONFIG_JBD_DEBUGis not setCONFIG_REISERFS_FS=y
#CONFIG_REISERFS_CHECKis not set
#CONFIG_REISERFS_PROC_INFOis not set
#CONFIG_REISERFS_FS_XATTRis not setCONFIG_JFS_FS=y
#CONFIG_JFS_POSIX_ACLis not set
#CONFIG_JFS_SECURITYis not set
#CONFIG_JFS_DEBUGis not set
#CONFIG_JFS_STATISTICSis not set
#CONFIG_FS_POSIX_ACLis not setCONFIG_XFS_FS=y
#CONFIG_XFS_QUOTAis not set
#CONFIG_XFS_SECURITYis not set
#CONFIG_XFS_POSIX_ACLis not set
#CONFIG_XFS_RTis not set
#CONFIG_GFS2_FSis not set
#CONFIG_OCFS2_FSis not set
#CONFIG_MINIX_FSis not set
#CONFIG_ROMFS_FSis not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
#CONFIG_QUOTAis not setCONFIG_DNOTIFY=y
#CONFIG_AUTOFS_FSis not set
#CONFIG_AUTOFS4_FSis not set
#CONFIG_FUSE_FSis not set#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#CONFIG_NTFS_FSis not set#
# Pseudo filesystems
#CONFIG_PROC_FS=y
#CONFIG_PROC_KCOREis not setCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=y
#CONFIG_TMPFSis not set
#CONFIG_HUGETLBFSis not set
#CONFIG_HUGETLB_PAGEis not setCONFIG_RAMFS=y
#CONFIG_CONFIGFS_FSis not set#
# Miscellaneous filesystems
#
#CONFIG_ADFS_FSis not set
#CONFIG_AFFS_FSis not setCONFIG_HFS_FS=yCONFIG_HFSPLUS_FS=y
#CONFIG_BEFS_FSis not set
#CONFIG_BFS_FSis not set
#CONFIG_EFS_FSis not set
#CONFIG_CRAMFSis not set
#CONFIG_VXFS_FSis not set
#CONFIG_HPFS_FSis not set
#CONFIG_QNX4FS_FSis not set
#CONFIG_SYSV_FSis not set
#CONFIG_UFS_FSis not set#
# Network File Systems
#CONFIG_NFS_FS=yCONFIG_NFS_V3=y
#CONFIG_NFS_V3_ACLis not set
#CONFIG_NFS_V4is not setCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=yCONFIG_NFSD_V3=y
#CONFIG_NFSD_V3_ACLis not set
#CONFIG_NFSD_V4is not setCONFIG_NFSD_TCP=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=y
#CONFIG_RPCSEC_GSS_KRB5is not set
#CONFIG_RPCSEC_GSS_SPKM3is not set
#CONFIG_SMB_FSis not set
#CONFIG_CIFSis not set
#CONFIG_NCP_FSis not set
#CONFIG_CODA_FSis not set
#CONFIG_AFS_FSis not set
#CONFIG_9P_FSis not set#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
#CONFIG_ACORN_PARTITIONis not set
#CONFIG_OSF_PARTITIONis not set
#CONFIG_AMIGA_PARTITIONis not set
#CONFIG_ATARI_PARTITIONis not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=y
#CONFIG_BSD_DISKLABELis not set
#CONFIG_MINIX_SUBPARTITIONis not set
#CONFIG_SOLARIS_X86_PARTITIONis not set
#CONFIG_UNIXWARE_DISKLABELis not set
#CONFIG_LDM_PARTITIONis not set
#CONFIG_SGI_PARTITIONis not set
#CONFIG_ULTRIX_PARTITIONis not set
#CONFIG_SUN_PARTITIONis not set
#CONFIG_KARMA_PARTITIONis not setCONFIG_EFI_PARTITION=y#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not setCONFIG_NLS_CODEPAGE_850=y
#CONFIG_NLS_CODEPAGE_852is not set
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not set
#CONFIG_NLS_CODEPAGE_1250is not set
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=y
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not setCONFIG_NLS_ISO8859_15=y
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not setCONFIG_NLS_UTF8=y#
# Distributed Lock Manager
#
#CONFIG_DLMis not set#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC32=yCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_PLIST=yCONFIG_IOMAP_COPY=y#
# Instrumentation Support
#
#CONFIG_PROFILINGis not set
#CONFIG_KPROBESis not set#
# Kernel hacking
#
#CONFIG_PRINTK_TIMEis not set
#CONFIG_ENABLE_MUST_CHECKis not setCONFIG_MAGIC_SYSRQ=y
#CONFIG_UNUSED_SYMBOLSis not set
#CONFIG_DEBUG_FSis not set
#CONFIG_HEADERS_CHECKis not set
#CONFIG_DEBUG_KERNELis not setCONFIG_LOG_BUF_SHIFT=15CONFIG_DEBUG_BUGVERBOSE=y
#CONFIG_IRQSTACKSis not setCONFIG_BOOTX_TEXT=y
#CONFIG_PPC_EARLY_DEBUGis not set#
# Security options
#
#CONFIG_KEYSis not set
#CONFIG_SECURITYis not set#
# Cryptographic options
#
#CONFIG_CRYPTOis not set
Also have you tried without CONFIG_PREEMPT ? Might be a bug there...
Ben.
Yes, tried with defconfig for g5 and disabled lots of things there, ant it works flawslessly... rtc too!!!
Of course I've left PREEMPT disabled, because we use this machine as a server.
Many thanks....
Ciao.
Massimiliano Vegni
Quoted 5 lines · Benjamin Herrenschmidt
Also have you tried without
CONFIG_PREEMPT? Might be a bug there...Ben.