Skip to contentSkip to conversation

Rewriting output interface

LARTC Hampton Maxwell 1 participant 2 messages Jan 29, 2007

lore
Share & tools
lore
#0 lore raw

I would like to setup some rules for a wireless bridge to do load balancing.
I'd like to dedicate one radio for doing transmit and one for receive.

               router
                 |
                 |
  ------------- eth0 ----------------
  |                                 |
wlan0       upstream device      wlan1
  |                                 ^
  |                                 |
  V   =============    ^
  |                                 |
  V                                 |
wlan2      downstream device     wlan3
  |                                 |
  ------------- eth0 ----------------
                 |
                 |
              network

All traffic headed to the network will be sent out on wlan0, while all traffic headed to the router to be sent on wlan3. Is tc capable of doing something like this, and if so, how would I configure it? I would prefer to bridge the traffic rather than routing it.

Thanks,
Hampton
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

We are using a madwifi type driver that supports wds. I just don't know how to setup the dual-bonded part of it. If someone has experience doing this with an ethernet only setup, I can adapt that to our network.

Cheers,
Hampton

Quoted 7 lines · Stephen Hemminger
Quoted 3 lines · On Mon, 29 Jan 2007 14:14:25 -0800 Hampton Maxwell <[email protected]>…

I would like to setup some rules for a wireless bridge to do load balancing.
I'd like to dedicate one radio for doing transmit and one for receive.

Quoted 6 lines

For most cases wireless bridge with Linux won't work. Unless you (one of the following):
* have special device firmware
* bridge only one client (ie point-to-point)
* use MAC layer NAT
* use experimental WDS and have device that supports it.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc