Longhaul - Add VT8235 support
PATCH 1/1 Longhaul - Add VT8235 support
I don't know why it is working and how, but it is working. On my Epia transition time is by default set to 100us. I'm changing it to 200us. After that I can change frequency from min (x4.0) to max (x7.5) without lockup. Many times.
There is a paranoid check at a beginning of a patch. Probably dead code, but I don't have better ideas for CL10000 case at the moment. Only way to to detect broken chip seems to be looking in log for spurious interrupts.
Signed-off-by Rafal Bilski <[email protected]>
--- arch/i386/kernel/cpu/cpufreq/longhaul.c | 62 +++++++++++++++++++++++++------ 1 files changed, 50 insertions(+), 12 deletions(-)
arch/i386/kernel/cpu/cpufreq/longhaul.c +50 -12
@@ -56,6 +56,7 @@/* Flags */ #define USE_ACPI_C3 (1 << 1)#define USE_NORTHBRIDGE (1 << 2) +#define USE_VT8235 (1 << 3)static int cpu_model;static unsigned int numscales=16 ;
@@ -544,20 +545,50 @@ static int enable_arbiter_disable(void)if (dev !=NULL ) {/* Enable access to port 0x22 */ pci_read_config_byte (dev, reg, &pci_cmd); -if ( !(pci_cmd &1 <<7 ) ) { +if (!(pci_cmd &1 <<7 )) { pci_cmd |=1 <<7 ;pci_write_config_byte (dev, reg, pci_cmd); +pci_read_config_byte (dev, reg, &pci_cmd); +if (!(pci_cmd &1 <<7 )) { + printk(KERN_ERR PFX + "Can't enable access to port 0x22.\n"); +return 0 ; + } }return 1 ; }return 0 ; } +static int longhaul_setup_vt8235 (void ) +{ +struct pci_dev *dev; +u8 pci_cmd; + +/* Find VT8235 southbridge */ + dev =pci_find_device (PCI_VENDOR_ID_VIA ,PCI_DEVICE_ID_VIA_8235 ,NULL ); +if (dev !=NULL ) { +/* Set transition time to max */ +pci_read_config_byte (dev,0xec , &pci_cmd); + pci_cmd &= ~(1 <<2 ); +pci_write_config_byte (dev,0xec , pci_cmd); +pci_read_config_byte (dev,0xe4 , &pci_cmd); + pci_cmd &= ~(1 <<7 ); +pci_write_config_byte (dev,0xe4 , pci_cmd); +pci_read_config_byte (dev,0xe5 , &pci_cmd); + pci_cmd |=1 <<7 ; +pci_write_config_byte (dev,0xe5 , pci_cmd); +return 1 ; + } +return 0 ; +} +static int __init longhaul_cpu_init (struct cpufreq_policy *policy) {struct cpuinfo_x86 *c = cpu_data;char *cpuname=NULL ;int ret; +int vt8235_present;/* Check what we have on this motherboard */ switch (c->x86_model) {
@@ -641,12 +672,16 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)break ; }; +/* Doesn't hurt */ + vt8235_present =longhaul_setup_vt8235 (); +/* Find ACPI data for processor */ -acpi_walk_namespace (ACPI_TYPE_PROCESSOR ,ACPI_ROOT_OBJECT ,ACPI_UINT32_MAX , - &longhaul_walk_callback,NULL , (void *)&pr); +acpi_walk_namespace (ACPI_TYPE_PROCESSOR ,ACPI_ROOT_OBJECT , +ACPI_UINT32_MAX , &longhaul_walk_callback, +NULL , (void *)&pr);/* Check ACPI support for C3 state */ -if ((pr !=NULL ) && (longhaul_version ==TYPE_POWERSAVER )) { +if (pr !=NULL && longhaul_version ==TYPE_POWERSAVER ) { cx = &pr->power.states[ACPI_STATE_C3 ];if (cx->address >0 && cx->latency <=1000 ) { longhaul_flags |=USE_ACPI_C3 ;
@@ -658,8 +693,11 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_flags |=USE_NORTHBRIDGE ; goto print_support_type; } - -/* No ACPI C3 or we can't use it */ +/* Use VT8235 southbridge if present */ +if (longhaul_version ==TYPE_POWERSAVER && vt8235_present) { + longhaul_flags |=USE_VT8235 ; + goto print_support_type; + }/* Check ACPI support for bus master arbiter disable */ if ((pr ==NULL ) || !(pr->flags.bm_control)) { printk(KERN_ERR PFX
@@ -668,18 +706,18 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) } print_support_type: -if (!(longhaul_flags &USE_NORTHBRIDGE )) { - printk (KERN_INFO PFX "Using ACPI support.\n"); - }else { +if (longhaul_flags &USE_NORTHBRIDGE ) printk (KERN_INFO PFX "Using northbridge support.\n"); - } +else if (longhaul_flags &USE_VT8235 ) + printk (KERN_INFO PFX "Using VT8235 support.\n"); +else + printk (KERN_INFO PFX "Using ACPI support.\n"); ret =longhaul_get_ranges ();if (ret !=0 )return ret; -if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER ) && - (scale_voltage !=0 )) +if ((longhaul_version !=TYPE_LONGHAUL_V1 ) && (scale_voltage !=0 ))longhaul_setup_voltagescaling (); policy->governor =CPUFREQ_DEFAULT_GOVERNOR ;
--------------------------------------------------------------------
Telefonia internetowa bez w³±czonego komputera. Do tego 1000 minut w promocji! >> http://link.interia.pl/f1a08