S3C2412 fix hw ecc

Hi,

S3C2412 use differents registers than s3c2440 for hw ecc handling.

Signed-off-by Matthieu CASTET <[email protected]>

Index: linux-2.6.20/drivers/mtd/nand/s3c2410.c
===================================================================

drivers/mtd/nand/s3c2410.c +27 -0

@@ -419,6 +419,15 @@
 	writel(ctrl, info->regs + S3C2410_NFCONF);
 }
 
+static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ctrl;
+
+	ctrl = readl(info->regs + S3C2440_NFCONT);
+	writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, info->regs + S3C2440_NFCONT);
+}
+
 static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);

@@ -442,6 +451,20 @@
 	return 0;
 }
 
+static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ecc = readl(info->regs + S3C2412_NFMECC0);
+
+	ecc_code[0] = ecc;
+	ecc_code[1] = ecc >> 8;
+	ecc_code[2] = ecc >> 16;
+
+	pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
+
+	return 0;
+}
+
 static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);

@@ -619,6 +642,10 @@
 			break;
 
 		case TYPE_S3C2412:
+  			chip->ecc.hwctl     = s3c2412_nand_enable_hwecc;
+  			chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+			break;
+
 		case TYPE_S3C2440:
   			chip->ecc.hwctl     = s3c2440_nand_enable_hwecc;
   			chip->ecc.calculate = s3c2440_nand_calculate_ecc;

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/