Skip to contentSkip to conversation

Measuring cpu time using getrusage

DISCUSSION Johann Schuster 2 participants 2 messages Feb 14, 2007 – Feb 17, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

currently i'm trying to measure the cpu times for numerical algorithms written in C using two calls of getrusage() and then calculating the time difference.

According to the man page of getrusage i looked at the user time of my process. Surprisingly the measured user times vary strongly depending on the system load of the machine.
A heavy system load nearly doubles the measured time for my routine.

Does anyone know a better way to measure the used cpu cycles of a given process (or part of a program) or can anyone give me a hint if i missed some important fact.

Any help appreciated. Thank you in advance.

Johann Schuster

#1 lore raw
Quoted 10 lines · Johann Schuster

currently i'm trying to measure the cpu times for numerical algorithms written in C using two calls of getrusage() and then calculating the time difference.

According to the man page of getrusage i looked at the user time of my process. Surprisingly the measured user times vary strongly depending on the system load of the machine.
A heavy system load nearly doubles the measured time for my routine.

Does your system have hyperthreading? (look at whether the siblings field in /proc/cpuinfo is greater than one)
If yes, there is no way to accurately measure runtimes because the (single-threaded) performance of your CPU depends on the other tasks running. Just disable hyperthreading for these measurements.

Tim