Skip to contentSkip to conversation

pvscan/vgscan/lvscan error

linux-lvm Jordi Prats 2 participants 3 messages Feb 16, 2007 – Feb 28, 2007

lore
Share & tools
lore
#0 lore raw

Hi all,
I've found that all vgscan is giving me an error. This is the output:

# vgscan -v
   Wiping cache of LVM-capable devices
   Wiping internal VG cache
 Reading all physical volumes.  This may take a while...
   Finding all volume groups
 /dev/dm-4: read failed after 0 of 4096 at 12989693952: Input/output error
 /dev/dm-4: read failed after 0 of 4096 at 0: Input/output error
   Finding volume group "padicat"
 Found volume group "padicat" using metadata type lvm2
   Finding volume group "vg_bbdd"
 Found volume group "vg_bbdd" using metadata type lvm2
   Finding volume group "vg_ordal"
 Found volume group "vg_ordal" using metadata type lvm2

Any idea what this "Input/output error" on /dev/dm-4 does it means? What is causing this error?

Thank you!

Signature · 9 lines
......................................................................
        __
       / /          Jordi Prats
 C E / S / C A      Dept. de Sistemes
     /_/            Centre de Supercomputaci� de Catalunya

 Gran Capit�, 2-4 (Edifici Nexus) � 08034 Barcelona
 T. 93 205 6464 � F.  93 205 6979 � [email protected]
...................................................................... 
#1 lore raw

Hello,
I've found more errors using lvm commands. This time using vgdisplay and lvdisplay:

# vgdisplay
  /dev/sdb: read failed after 0 of 4096 at 0: Input/output error
  /dev/sde: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdf: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdg: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdi: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdk: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdl: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdp: read failed after 0 of 4096 at 0: Input/output error
  --- Volume group ---
(...)
# lvdisplay
  /dev/sdb: read failed after 0 of 4096 at 0: Input/output error
  /dev/sde: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdf: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdg: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdi: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdk: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdl: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdp: read failed after 0 of 4096 at 0: Input/output error
  --- Logical volume ---
(...)

I don't know what is causing this. Anyone can help me with this problem?

Thank you!
Jordi

Quoted 22 lines · Jordi Prats

Hi all,
I've found that all vgscan is giving me an error. This is the output:

# vgscan -v
   Wiping cache of LVM-capable devices
   Wiping internal VG cache
 Reading all physical volumes.  This may take a while...
   Finding all volume groups
 /dev/dm-4: read failed after 0 of 4096 at 12989693952: Input/output error
 /dev/dm-4: read failed after 0 of 4096 at 0: Input/output error
   Finding volume group "padicat"
 Found volume group "padicat" using metadata type lvm2
   Finding volume group "vg_bbdd"
 Found volume group "vg_bbdd" using metadata type lvm2
   Finding volume group "vg_ordal"
 Found volume group "vg_ordal" using metadata type lvm2

Any idea what this "Input/output error" on /dev/dm-4 does it means? What is causing this error?

Thank you!

Signature · 11 lines
......................................................................
        __
       / /          Jordi Prats Catal�
 C E / S / C A      Departament de Sistemes
     /_/            Centre de Supercomputaci� de Catalunya

 Gran Capit�, 2-4 (Edifici Nexus) � 08034 Barcelona
 T. 93 205 6464 � F.  93 205 6979 � [email protected]
......................................................................
pgp:0x5D0D1321
......................................................................
#2 lore raw
Quoted 28 lines · Jordi Prats

Hello,
I've found more errors using lvm commands. This time using vgdisplay and lvdisplay:

# vgdisplay
  /dev/sdb: read failed after 0 of 4096 at 0: Input/output error
  /dev/sde: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdf: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdg: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdi: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdk: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdl: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdp: read failed after 0 of 4096 at 0: Input/output error
  --- Volume group ---
(...)
# lvdisplay
  /dev/sdb: read failed after 0 of 4096 at 0: Input/output error
  /dev/sde: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdf: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdg: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdi: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdk: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdl: read failed after 0 of 4096 at 0: Input/output error
  /dev/sdp: read failed after 0 of 4096 at 0: Input/output error
  --- Logical volume ---
(...)
Quoted 5 lines

I don't know what is causing this. Anyone can help me with this problem?

Thank you!
Jordi

What kind of storage do you have?

This might happen if you have an active/passive storage array. The passive paths won't accept I/O, but will show up in a device list. LVM (and other processes/threads) tries to do I/O to all devices (unless they are filtered out in /etc/lvm.conf), and so you get I/O errors.

Quoted 24 lines
Quoted 22 lines · Jordi Prats

Hi all,
I've found that all vgscan is giving me an error. This is the output:

# vgscan -v
   Wiping cache of LVM-capable devices
   Wiping internal VG cache
 Reading all physical volumes.  This may take a while...
   Finding all volume groups
 /dev/dm-4: read failed after 0 of 4096 at 12989693952: Input/output error
 /dev/dm-4: read failed after 0 of 4096 at 0: Input/output error
   Finding volume group "padicat"
 Found volume group "padicat" using metadata type lvm2
   Finding volume group "vg_bbdd"
 Found volume group "vg_bbdd" using metadata type lvm2
   Finding volume group "vg_ordal"
 Found volume group "vg_ordal" using metadata type lvm2

Any idea what this "Input/output error" on /dev/dm-4 does it means? What is causing this error?

Thank you!