Skip to contentSkip to conversation

2.6.16.41 & 2.6.18.7 OK, 2.6.19.5 NOT, 2.6.18.8 KERNEL PANIC

DISCUSSION Mario Vanoni 2 participants 4 messages Feb 24, 2007 – Feb 25, 2007

lore
Share & tools
lore
#0 lore raw

2.6.18.7 vanilla & 2.6.16.41 vanilla:
/dev/hda CD/DVD
/dev/hda1 / IDE HD 160GB
/dev/hda2 swap
/dev/sda1 /xyz SATA HD 320GB
/dev/sda2 swap
/dev/sdb1 /zzz SATA HD 320GB
/dev/sdb2 swap
/dev/sdc1 /usb USB KEY 512MB
all 100% OK since 12-Dec-2006

2.6.19.5 vanilla:
/dev/hda, /dev/hdb OK

fsck 1.38 (30-Jun-2005)
/dev/sda1: clean 2960/125696 files, 12379/125692 blocks
but /dev/sda1 is only partially mounted, du -hs says 33M
...
/sbin/e2fsck: No such file or directory while trying to open /dev/sdb1
...
same for /dev/sdc1
...
swapon: cannot stat /dev/sda2: No such file or directory same for /dev/sdb2,
so only 2GB swap, not 6GB

---
2.6.18.8 vanilla: !!!
screen eating leftmost characters, then
kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,65)
POWER SWITCH ultima ratio
---

all 4 kernels same .config from 2.6.18.6, make oldconfig, Enter on all new questions

AUSUS P4R800V, P4HT3400, 2GB mem Slackware 11.0, udev-105, gcc-3.4.6, glibc-2.3.6, all ext2 4096 formated

Rebooting 2.6.18.7 vanilla:
all devices OK, 6GB swap

FEEDBACK ONLY, _not_ in LMKL

Kind regards
Mario Vanoni

#1 lore raw
Quoted 14 lines · On Sat, 24 Feb 2007 16:44:20 +0100 Mario Vanoni wrote:

2.6.18.7 vanilla & 2.6.16.41 vanilla:
/dev/hda CD/DVD
/dev/hda1 / IDE HD 160GB
/dev/hda2 swap
/dev/sda1 /xyz SATA HD 320GB
/dev/sda2 swap
/dev/sdb1 /zzz SATA HD 320GB
/dev/sdb2 swap
/dev/sdc1 /usb USB KEY 512MB
all 100% OK since 12-Dec-2006

2.6.19.5 vanilla:
/dev/hda, /dev/hdb OK

Quoted 11 lines

fsck 1.38 (30-Jun-2005)
/dev/sda1: clean 2960/125696 files, 12379/125692 blocks
but /dev/sda1 is only partially mounted, du -hs says 33M
...
/sbin/e2fsck: No such file or directory while trying to open /dev/sdb1
...
same for /dev/sdc1
...
swapon: cannot stat /dev/sda2: No such file or directory same for /dev/sdb2,
so only 2GB swap, not 6GB

For 2.6.19.*, does .config contain any CONFIG_ATA* entries? FYI, in 2.6.19, CONFIG_SCSI_SATA* config symbols were renamed to CONFIG_ATA*, so just using an oldconfig won't be sufficient for SATA support.

Quoted 11 lines

---
2.6.18.8 vanilla: !!!
screen eating leftmost characters, then
kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,65)
POWER SWITCH ultima ratio
---

all 4 kernels same .config from 2.6.18.6, make oldconfig, Enter on all new questions

Quoted 8 lines

AUSUS P4R800V, P4HT3400, 2GB mem Slackware 11.0, udev-105, gcc-3.4.6, glibc-2.3.6, all ext2 4096 formated

Rebooting 2.6.18.7 vanilla:
all devices OK, 6GB swap

FEEDBACK ONLY, _not_ in LMKL

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

#2 lore raw
Quoted 12 lines · Randy Dunlap
Quoted 9 lines · On Sat, 24 Feb 2007 16:44:20 +0100 Mario Vanoni wrote:

2.6.18.7 vanilla & 2.6.16.41 vanilla:
/dev/hda CD/DVD
/dev/hda1 / IDE HD 160GB
/dev/hda2 swap
/dev/sda1 /xyz SATA HD 320GB
/dev/sda2 swap
/dev/sdb1 /zzz SATA HD 320GB
/dev/sdb2 swap
/dev/sdc1 /usb USB KEY 512MB

Quoted 4 lines

For 2.6.19.*, does .config contain any CONFIG_ATA* entries? FYI, in 2.6.19, CONFIG_SCSI_SATA* config symbols were renamed to CONFIG_ATA*, so just using an oldconfig won't be sufficient for SATA support.

You are 100% right, I was lazy, thanks for the gentle blame. 2.6.19.5 vanilla works perfectly, 2.6.20.1 vanilla too!

Quoted 7 lines
Quoted 7 lines

---
2.6.18.8 vanilla: !!!
screen eating leftmost characters, then
kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,65)
POWER SWITCH ultima ratio
---

Strange error, due to a partially corrupted MBR (?):
2.6.19.5 with incorrect .config, lilo, SATA missing reboot with old 2.6.18.7, OK
2.6.18.8 with old .config from 2.6.18.6,
lilo objects not seeing /dev/sdb and /dev/sdc, reboot and kernel panic,
reboot with 2.6.18.7, OK
2.6.18.8 make mrproper and rm -r /lib/modules/2.6.18.8 make bzImage etc., lilo: 2.6.18.8 works perfectly.

Many thanks and kind regards
Mario Vanoni

#3 lore raw
Quoted 13 lines · On Sun, 25 Feb 2007 17:05:58 +0100 Mario Vanoni wrote:
Quoted 11 lines · Randy Dunlap
Quoted 9 lines · On Sat, 24 Feb 2007 16:44:20 +0100 Mario Vanoni wrote:

2.6.18.7 vanilla & 2.6.16.41 vanilla:
/dev/hda CD/DVD
/dev/hda1 / IDE HD 160GB
/dev/hda2 swap
/dev/sda1 /xyz SATA HD 320GB
/dev/sda2 swap
/dev/sdb1 /zzz SATA HD 320GB
/dev/sdb2 swap
/dev/sdc1 /usb USB KEY 512MB

Quoted 15 lines
Quoted 4 lines

For 2.6.19.*, does .config contain any CONFIG_ATA* entries? FYI, in 2.6.19, CONFIG_SCSI_SATA* config symbols were renamed to CONFIG_ATA*, so just using an oldconfig won't be sufficient for SATA support.

You are 100% right, I was lazy, thanks for the gentle blame. 2.6.19.5 vanilla works perfectly, 2.6.20.1 vanilla too!

Quoted 7 lines
Quoted 7 lines

---
2.6.18.8 vanilla: !!!
screen eating leftmost characters, then
kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,65)
POWER SWITCH ultima ratio
---

What is (3,65) supposed to be? devices.txt says that it's /dev/hdb1. I don't see that listed anywhere here...

Quoted 9 lines

Strange error, due to a partially corrupted MBR (?):
2.6.19.5 with incorrect .config, lilo, SATA missing reboot with old 2.6.18.7, OK
2.6.18.8 with old .config from 2.6.18.6,
lilo objects not seeing /dev/sdb and /dev/sdc, reboot and kernel panic,
reboot with 2.6.18.7, OK
2.6.18.8 make mrproper and rm -r /lib/modules/2.6.18.8 make bzImage etc., lilo: 2.6.18.8 works perfectly.

---
~Randy